ardupilot/libraries/AP_HAL_ChibiOS/hwdef/SuccexF4/hwdef-bl.dat

46 lines
781 B
Plaintext

# hw definition file for processing by chibios_pins.py
# for SuccexF4 bootloader
# MCU class and specific type
MCU STM32F4xx STM32F405xx
# board ID for firmware load
APJ_BOARD_ID 1011
# crystal frequency
OSCILLATOR_HZ 8000000
FLASH_SIZE_KB 1024
# don't allow bootloader to use more than 16k
FLASH_USE_MAX_KB 16
# bootloader is installed at zero offset
FLASH_RESERVE_START_KB 0
# LEDs
PB5 LED_BOOTLOADER OUTPUT LOW
define HAL_LED_ON 0
# the location where the bootloader will put the firmware
FLASH_BOOTLOADER_LOAD_KB 64
# order of UARTs
SERIAL_ORDER OTG1
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
# Add CS pins to ensure they are high in bootloader
PA4 ICM20689_1_CS CS
PC3 ICM20689_2_CS CS
PB12 AT7456E_CS CS
PA15 FLASH_CS CS