Andrew Tridgell ada0dd5504 Plane: check both ground and airspeed in autocal test ... when the airspeed ratio is far too low we were not raising it as the airspeed was never getting above the minimum airspeed Pair-Programmed-With: Jon Challinger		2014-01-17 10:29:28 +11:00
..
APM_Config.h	Plane: removed HIL_MODE_ATTITUDE	2013-04-12 17:44:40 +10:00
APM_Config.h.reference	Plane: updates for new compass API	2013-05-02 12:48:14 +10:00
ArduPlane.pde	Plane: check both ground and airspeed in autocal test	2014-01-17 10:29:28 +11:00
Attitude.pde	Plane: Now using AP_Arming library.	2013-12-11 17:29:23 +11:00
climb_rate.pde	uncrustify ArduPlane/climb_rate.pde	2012-08-21 18:57:21 -07:00
command_description.txt	Cleanup: rename files with spaces in their names, replace with underscores	2012-02-28 16:14:31 -08:00
commands_logic.pde	Plane: only log when armed by default	2014-01-14 13:07:43 +11:00
commands_process.pde	Plane: only log when armed by default	2014-01-14 13:07:43 +11:00
commands.pde	Plane: auto-update home and baro calibration when disarmed	2013-10-05 18:45:45 +10:00
compat.h	ArduPlane: Ported to AP_HAL	2012-12-20 14:51:36 +11:00
compat.pde	Plane: removed some compat code	2013-09-30 21:06:43 +10:00
config.h	Plane: default LOG_BITMASK to 32767 on non-APM	2013-12-31 10:28:38 +11:00
control_modes.pde	Plane: fixed a bug where mode would not revert on geo-fence disable	2013-12-17 14:14:13 +11:00
createTags	imported ArduPlane from ArduPilotMega svn	2011-09-09 11:29:39 +10:00
defines.h	Plane: fixed integer size problem on APM2	2014-01-14 21:27:39 +11:00
events.pde	Plane: integrate BattMonitor	2013-10-03 11:16:08 +09:00
failsafe.pde	Plane: updates for AP_HAL::MemberProc	2013-09-30 21:06:43 +10:00
GCS_Mavlink.pde	Plane: log PX4Firmware and NuttX git revisions in logs	2014-01-14 15:37:03 +11:00
geofence.pde	Plane: Introducing FENCE_RETALT parameter.	2013-12-31 09:48:20 +11:00
Log.pde	Plane: log PX4Firmware and NuttX git revisions in logs	2014-01-14 15:37:03 +11:00
Makefile	Plane: cleanup cruft in Makefile	2013-10-13 21:41:01 +11:00
navigation.pde	Plane: use G_Dt for acro angle integration	2013-10-12 13:30:27 +11:00
nocore.inoflag	ArduPlane: Ported to AP_HAL	2012-12-20 14:51:36 +11:00
Parameters.h	Plane: make LOG_BITMASK 32 bits	2014-01-14 13:06:52 +11:00
Parameters.pde	Plane: make LOG_BITMASK 32 bits	2014-01-14 13:06:52 +11:00
radio.pde	Plane: setup PWM to be used on throttle when safety is safe on PX4	2014-01-15 22:28:00 +11:00
rally.pde	Plane: removed some compile warnings from rally.pde	2013-12-31 09:48:24 +11:00
sensors.pde	Plane: only log when armed by default	2014-01-14 13:07:43 +11:00
setup.pde	Plane: replace APM with board in cli	2013-12-28 10:42:30 +09:00
system.pde	Plane: prevent log corruption when new log started	2014-01-14 14:29:14 +11:00
test.pde	Plane: changes for compass healthy API	2013-12-09 17:47:38 +11:00