ardupilot/libraries/AP_HAL_SITL/Scheduler.cpp

231 lines
5.4 KiB
C++

#include <AP_HAL/AP_HAL.h>
#if CONFIG_HAL_BOARD == HAL_BOARD_SITL
#include "AP_HAL_SITL.h"
#include "Scheduler.h"
#include "UARTDriver.h"
#include <sys/time.h>
#include <unistd.h>
#include <fenv.h>
using namespace HALSITL;
extern const AP_HAL::HAL& hal;
AP_HAL::Proc Scheduler::_failsafe = nullptr;
volatile bool Scheduler::_timer_suspended = false;
volatile bool Scheduler::_timer_event_missed = false;
AP_HAL::MemberProc Scheduler::_timer_proc[SITL_SCHEDULER_MAX_TIMER_PROCS] = {nullptr};
uint8_t Scheduler::_num_timer_procs = 0;
bool Scheduler::_in_timer_proc = false;
AP_HAL::MemberProc Scheduler::_io_proc[SITL_SCHEDULER_MAX_TIMER_PROCS] = {nullptr};
uint8_t Scheduler::_num_io_procs = 0;
bool Scheduler::_in_io_proc = false;
Scheduler::Scheduler(SITL_State *sitlState) :
_sitlState(sitlState),
_stopped_clock_usec(0)
{
}
void Scheduler::init()
{
}
void Scheduler::delay_microseconds(uint16_t usec)
{
uint64_t start = AP_HAL::micros64();
do {
uint64_t dtime = AP_HAL::micros64() - start;
if (dtime >= usec) {
break;
}
if (_stopped_clock_usec) {
_sitlState->wait_clock(start + usec);
} else {
usleep(usec - dtime);
}
} while (true);
}
void Scheduler::delay(uint16_t ms)
{
while (ms > 0) {
delay_microseconds(1000);
ms--;
if (_min_delay_cb_ms <= ms) {
if (_delay_cb) {
_delay_cb();
}
}
}
}
void Scheduler::register_delay_callback(AP_HAL::Proc proc,
uint16_t min_time_ms)
{
_delay_cb = proc;
_min_delay_cb_ms = min_time_ms;
}
void Scheduler::register_timer_process(AP_HAL::MemberProc proc)
{
for (uint8_t i = 0; i < _num_timer_procs; i++) {
if (_timer_proc[i] == proc) {
return;
}
}
if (_num_timer_procs < SITL_SCHEDULER_MAX_TIMER_PROCS) {
_timer_proc[_num_timer_procs] = proc;
_num_timer_procs++;
}
}
void Scheduler::register_io_process(AP_HAL::MemberProc proc)
{
for (uint8_t i = 0; i < _num_io_procs; i++) {
if (_io_proc[i] == proc) {
return;
}
}
if (_num_io_procs < SITL_SCHEDULER_MAX_TIMER_PROCS) {
_io_proc[_num_io_procs] = proc;
_num_io_procs++;
}
}
void Scheduler::register_timer_failsafe(AP_HAL::Proc failsafe, uint32_t period_us)
{
_failsafe = failsafe;
}
void Scheduler::suspend_timer_procs() {
_timer_suspended = true;
}
void Scheduler::resume_timer_procs() {
_timer_suspended = false;
if (_timer_event_missed) {
_timer_event_missed = false;
_run_timer_procs(false);
}
}
bool Scheduler::in_timerprocess() {
return _in_timer_proc || _in_io_proc;
}
void Scheduler::system_initialized() {
if (_initialized) {
AP_HAL::panic(
"PANIC: scheduler system initialized called more than once");
}
int exceptions = FE_OVERFLOW | FE_DIVBYZERO;
#ifndef __i386__
// i386 with gcc doesn't work with FE_INVALID
exceptions |= FE_INVALID;
#endif
if (_sitlState->_sitl == nullptr || _sitlState->_sitl->float_exception) {
feenableexcept(exceptions);
} else {
feclearexcept(exceptions);
}
_initialized = true;
}
void Scheduler::sitl_end_atomic() {
if (_nested_atomic_ctr == 0)
hal.uartA->println("NESTED ATOMIC ERROR");
else
_nested_atomic_ctr--;
}
void Scheduler::reboot(bool hold_in_bootloader)
{
hal.uartA->println("REBOOT NOT IMPLEMENTED\r\n");
}
void Scheduler::_run_timer_procs(bool called_from_isr)
{
if (_in_timer_proc) {
// the timer calls took longer than the period of the
// timer. This is bad, and may indicate a serious
// driver failure. We can't just call the drivers
// again, as we could run out of stack. So we only
// call the _failsafe call. It's job is to detect if
// the drivers or the main loop are indeed dead and to
// activate whatever failsafe it thinks may help if
// need be. We assume the failsafe code can't
// block. If it does then we will recurse and die when
// we run out of stack
if (_failsafe != nullptr) {
_failsafe();
}
return;
}
_in_timer_proc = true;
if (!_timer_suspended) {
// now call the timer based drivers
for (int i = 0; i < _num_timer_procs; i++) {
if (_timer_proc[i]) {
_timer_proc[i]();
}
}
} else if (called_from_isr) {
_timer_event_missed = true;
}
// and the failsafe, if one is setup
if (_failsafe != nullptr) {
_failsafe();
}
_in_timer_proc = false;
}
void Scheduler::_run_io_procs(bool called_from_isr)
{
if (_in_io_proc) {
return;
}
_in_io_proc = true;
if (!_timer_suspended) {
// now call the IO based drivers
for (int i = 0; i < _num_io_procs; i++) {
if (_io_proc[i]) {
_io_proc[i]();
}
}
} else if (called_from_isr) {
_timer_event_missed = true;
}
_in_io_proc = false;
UARTDriver::from(hal.uartA)->_timer_tick();
UARTDriver::from(hal.uartB)->_timer_tick();
UARTDriver::from(hal.uartC)->_timer_tick();
UARTDriver::from(hal.uartD)->_timer_tick();
UARTDriver::from(hal.uartE)->_timer_tick();
}
/*
set simulation timestamp
*/
void Scheduler::stop_clock(uint64_t time_usec)
{
_stopped_clock_usec = time_usec;
_run_io_procs(false);
}
#endif