ardupilot/libraries/AP_GPS/AP_GPS_MTK19.cpp

238 lines
7.1 KiB
C++

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: t -*-
//
// DIYDrones Custom Mediatek GPS driver for ArduPilot and ArduPilotMega.
// Code by Michael Smith, Jordi Munoz and Jose Julio, Craig Elder, DIYDrones.com
//
// This library is free software; you can redistribute it and / or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// GPS configuration : Custom protocol per "DIYDrones Custom Binary Sentence Specification V1.6, v1.7, v1.8, v1.9"
//
#include <AP_HAL.h>
#include "AP_GPS_MTK19.h"
#include <stdint.h>
// Constructors ////////////////////////////////////////////////////////////////
AP_GPS_MTK19::AP_GPS_MTK19() : GPS()
{
}
// Public Methods //////////////////////////////////////////////////////////////
void
AP_GPS_MTK19::init(AP_HAL::UARTDriver *s, enum GPS_Engine_Setting nav_setting)
{
_port = s;
_port->flush();
// initialize serial port for binary protocol use
// XXX should assume binary, let GPS_AUTO handle dynamic config?
_port->print(MTK_SET_BINARY);
// set 5Hz update rate
_port->print(MTK_OUTPUT_5HZ);
// set SBAS on
_port->print(SBAS_ON);
// set WAAS on
_port->print(WAAS_ON);
// Set Nav Threshold to 0 m/s
_port->print(MTK_NAVTHRES_OFF);
// set initial epoch code
_epoch = TIME_OF_DAY;
_time_offset = 0;
_offset_calculated = false;
idleTimeout = 1200;
}
// Process bytes available from the stream
//
// The stream is assumed to contain only our custom message. If it
// contains other messages, and those messages contain the preamble bytes,
// it is possible for this code to become de-synchronised. Without
// buffering the entire message and re-processing it from the top,
// this is unavoidable.
//
// The lack of a standard header length field makes it impossible to skip
// unrecognised messages.
//
bool
AP_GPS_MTK19::read(void)
{
uint8_t data;
int16_t numc;
bool parsed = false;
numc = _port->available();
for (int16_t i = 0; i < numc; i++) { // Process bytes received
// read the next byte
data = _port->read();
restart:
switch(_step) {
// Message preamble, class, ID detection
//
// If we fail to match any of the expected bytes, we
// reset the state machine and re-consider the failed
// byte as the first byte of the preamble. This
// improves our chances of recovering from a mismatch
// and makes it less likely that we will be fooled by
// the preamble appearing as data in some other message.
//
case 0:
if (data == PREAMBLE1_V16) {
_mtk_revision = MTK_GPS_REVISION_V16;
_step++;
} else if (data == PREAMBLE1_V19) {
_mtk_revision = MTK_GPS_REVISION_V19;
_step++;
}
break;
case 1:
if (data == PREAMBLE2) {
_step++;
} else {
_step = 0;
goto restart;
}
break;
case 2:
if (sizeof(_buffer) == data) {
_step++;
_ck_b = _ck_a = data; // reset the checksum accumulators
_payload_counter = 0;
} else {
_step = 0; // reset and wait for a message of the right class
goto restart;
}
break;
// Receive message data
//
case 3:
_buffer.bytes[_payload_counter++] = data;
_ck_b += (_ck_a += data);
if (_payload_counter == sizeof(_buffer)) {
_step++;
}
break;
// Checksum and message processing
//
case 4:
_step++;
if (_ck_a != data) {
_step = 0;
goto restart;
}
break;
case 5:
_step = 0;
if (_ck_b != data) {
goto restart;
}
fix = ((_buffer.msg.fix_type == FIX_3D) ||
(_buffer.msg.fix_type == FIX_3D_SBAS));
if (_mtk_revision == MTK_GPS_REVISION_V16) {
latitude = _buffer.msg.latitude * 10; // V16, V17,V18 doc says *10e7 but device says otherwise
longitude = _buffer.msg.longitude * 10; // V16, V17,V18 doc says *10e7 but device says otherwise
} else {
latitude = _buffer.msg.latitude;
longitude = _buffer.msg.longitude;
}
altitude = _buffer.msg.altitude;
ground_speed = _buffer.msg.ground_speed;
ground_course = _buffer.msg.ground_course;
num_sats = _buffer.msg.satellites;
hdop = _buffer.msg.hdop;
date = _buffer.msg.utc_date;
// time from gps is UTC, but convert here to msToD
int32_t time_utc = _buffer.msg.utc_time;
int32_t temp = (time_utc/10000000);
time_utc -= temp*10000000;
time = temp * 3600000;
temp = (time_utc/100000);
time_utc -= temp*100000;
time += temp * 60000 + time_utc;
parsed = true;
#ifdef FAKE_GPS_LOCK_TIME
if (millis() > FAKE_GPS_LOCK_TIME*1000) {
fix = true;
latitude = -35000000UL;
longitude = 149000000UL;
altitude = 584;
}
#endif
}
}
return parsed;
}
/*
detect a MTK16 or MTK19 GPS
*/
bool
AP_GPS_MTK19::_detect(uint8_t data)
{
static uint8_t payload_counter;
static uint8_t step;
static uint8_t ck_a, ck_b;
restart:
switch (step) {
case 0:
ck_b = ck_a = payload_counter = 0;
if (data == PREAMBLE1_V16 || data == PREAMBLE1_V19) {
step++;
}
break;
case 1:
if (PREAMBLE2 == data) {
step++;
} else {
step = 0;
goto restart;
}
break;
case 2:
if (data == sizeof(struct diyd_mtk_msg)) {
step++;
ck_b = ck_a = data;
} else {
step = 0;
goto restart;
}
break;
case 3:
ck_b += (ck_a += data);
if (++payload_counter == sizeof(struct diyd_mtk_msg))
step++;
break;
case 4:
step++;
if (ck_a != data) {
step = 0;
goto restart;
}
break;
case 5:
step = 0;
if (ck_b != data) {
goto restart;
}
return true;
}
return false;
}