.. |
examples
|
AP_InertialSensor: correct INS_generic example
|
2022-08-13 20:53:29 +10:00 |
AP_InertialSensor.cpp
|
AP_InertialSensor: make sure dynamic notches always get updates so that slew limiting is not too aggressive
|
2022-10-04 16:50:15 +09:00 |
AP_InertialSensor.h
|
AP_InertialSensor: Allow gyro counts to be returned
|
2022-10-04 16:50:15 +09:00 |
AP_InertialSensor_ADIS1647x.cpp
|
AP_InertialSensor: added support for more ADIS IMUs
|
2021-12-29 18:25:18 +11:00 |
AP_InertialSensor_ADIS1647x.h
|
AP_InertialSensor: added support for more ADIS IMUs
|
2021-12-29 18:25:18 +11:00 |
AP_InertialSensor_BMI055.cpp
|
AP_InertialSensor: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_InertialSensor_BMI055.h
|
AP_InertialSensor: removed old method of specifying most IMUs
|
2019-08-28 06:54:11 +10:00 |
AP_InertialSensor_BMI088.cpp
|
AP_InertialSensor: Fix BMI085 accel scaling
|
2022-10-24 22:23:43 +09:00 |
AP_InertialSensor_BMI088.h
|
AP_InertialSensor: Fix BMI085 accel scaling
|
2022-10-24 22:23:43 +09:00 |
AP_InertialSensor_BMI160.cpp
|
AP_InertialSensor: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_InertialSensor_BMI160.h
|
AP_InertialSensor: BMI160: Allow configuring the rotation
|
2021-08-13 12:32:28 +10:00 |
AP_InertialSensor_BMI270.cpp
|
AP_InertialSensor: synchronize BMI70 on fifo reads
|
2022-09-06 09:31:21 +10:00 |
AP_InertialSensor_BMI270.h
|
AP_InertialSensor: synchronize BMI70 on fifo reads
|
2022-09-06 09:31:21 +10:00 |
AP_InertialSensor_Backend.cpp
|
AP_InertialSensor: synchronise fifo reads on the ICM42xxx
|
2022-08-12 20:53:36 +10:00 |
AP_InertialSensor_Backend.h
|
AP_InertialSensor: added support for ICM42670 IMU
|
2022-08-02 17:26:46 +10:00 |
AP_InertialSensor_ExternalAHRS.cpp
|
AP_InertialSensor: fixed handling of more than 3 accel/gyro instances
|
2021-04-13 09:36:52 +10:00 |
AP_InertialSensor_ExternalAHRS.h
|
AP_InertialSensor: fixed handling of more than 3 accel/gyro instances
|
2021-04-13 09:36:52 +10:00 |
AP_InertialSensor_Invensense.cpp
|
AP_InertialSensor: cleanup NAMED_VALUE_FLOAT for fifo error
|
2023-01-20 10:12:59 +09:00 |
AP_InertialSensor_Invensense.h
|
AP_InertialSensor: add fast reset for ICM20602 instead of full reset on bad temp sample
|
2023-01-10 10:14:12 +09:00 |
AP_InertialSensor_Invensense_registers.h
|
AP_InertialSensor: properly reset MPU6000 signal path at startup
|
2022-06-08 17:44:17 +10:00 |
AP_InertialSensor_Invensensev2.cpp
|
AP_InertialSensor: remove voiding of parameter
|
2022-07-05 09:54:53 +10:00 |
AP_InertialSensor_Invensensev2.h
|
AP_InertialSensor: add support for checked register in Invensensev2 Drvr
|
2020-08-06 12:41:35 +10:00 |
AP_InertialSensor_Invensensev2_registers.h
|
AP_IneertialSensor: fixed orientations and gyro scale factors for new Invensense IMUs
|
2019-03-21 18:54:32 +11:00 |
AP_InertialSensor_Invensensev3.cpp
|
AP_InertialSensor: ensure that hardware AAF and notch filter are enabled on 42605 and 42609
|
2022-11-21 18:48:49 +09:00 |
AP_InertialSensor_Invensensev3.h
|
AP_InertialSensor: synchronise fifo reads on the ICM42xxx
|
2022-08-12 20:53:36 +10:00 |
AP_InertialSensor_L3G4200D.cpp
|
AP_InertialSensor: fixed handling of more than 3 accel/gyro instances
|
2021-04-13 09:36:52 +10:00 |
AP_InertialSensor_L3G4200D.h
|
AP_InertialSensor: update L3G4200D driver
|
2020-10-06 09:27:26 -07:00 |
AP_InertialSensor_LSM9DS0.cpp
|
AP_InertialSensor: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_InertialSensor_LSM9DS0.h
|
AP_InertialSensor: enable temperature sensor on LSM9DS0
|
2021-01-21 13:09:21 +11:00 |
AP_InertialSensor_LSM9DS1.cpp
|
AP_InertialSensor: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_InertialSensor_LSM9DS1.h
|
AP_InertialSensor: require gyro orientations in LSM9DS probe
|
2019-08-27 19:29:37 +10:00 |
AP_InertialSensor_Logging.cpp
|
AP_InertialSensor: remove un-needed methods
|
2022-07-19 10:30:36 +10:00 |
AP_InertialSensor_NONE.cpp
|
AP_InertialSensor: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_InertialSensor_NONE.h
|
AP_InertialSensor: use motor_mask from SITL for which outputs are motors
|
2022-10-24 22:23:43 +09:00 |
AP_InertialSensor_RST.cpp
|
AP_InertialSensor: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_InertialSensor_RST.h
|
AP_InertialSensor: fix code style problem, delete useless codes
|
2017-11-22 10:20:00 -08:00 |
AP_InertialSensor_SITL.cpp
|
AP_InertialSensor: use motor_mask from SITL for which outputs are motors
|
2022-10-24 22:23:43 +09:00 |
AP_InertialSensor_SITL.h
|
AP_InertialSensor: use motor_mask from SITL for which outputs are motors
|
2022-10-24 22:23:43 +09:00 |
AP_InertialSensor_tempcal.cpp
|
AP_InertialSensor: fixed build with logging disabled
|
2022-06-06 14:50:40 +10:00 |
AuxiliaryBus.cpp
|
AP_InertialSensor: removed assert calls
|
2021-03-25 14:03:40 +11:00 |
AuxiliaryBus.h
|
AP_InertialSensor: implement periodic thread for AuxiliaryBus
|
2017-09-11 09:52:41 -07:00 |
BatchSampler.cpp
|
AP_InertialSensor: params always use set method
|
2022-08-03 13:43:48 +01:00 |
LogStructure.h
|
AP_InertialSensor: vibe units m/s/s
|
2021-11-18 13:23:06 +09:00 |