mirror of https://github.com/ArduPilot/ardupilot
143 lines
7.0 KiB
Plaintext
143 lines
7.0 KiB
Plaintext
Antenna Tracker Release Notes:
|
|
------------------------------------------------------------------
|
|
AntennaTracker 4.5.0 beta3 14-Mar-2024
|
|
Changes from 4.5.0 beta1
|
|
|
|
Board specific changes
|
|
- added PixFlamingo F7 board
|
|
- support ICM42688 on BlitzF745AIO
|
|
- fixed IMU orientation of CubeRedSecondary
|
|
- enable all FPV features on SpeedyBeeF405WING
|
|
|
|
System level changes
|
|
|
|
- improved robustness of CRSF parser
|
|
- reduced memory used by DDS/ROS2
|
|
- added filesystem crc32 binding in lua scripting
|
|
- support visual odometry quality metric and added autoswitching lua script
|
|
- allow for expansion of fence storage to microSD for larger pologon fences
|
|
- allow FTP upload of fence and rally points
|
|
- fixed vehicle type of ship simulation for ship landing
|
|
- make severity level depend on generator error level in IE 2400 generator
|
|
- speed up initial GPS probe by using SERIALn_BAUD first
|
|
- allow NanoRadar radar and proximity sensor to share the CAN bus
|
|
- added MR72 CAN proximity sensor
|
|
- only produce *_with_bl.hex not *.hex in builds if bootloader available
|
|
- fixed check for GPS antenna separation in moving baseline yaw
|
|
- added GPS_DRV_OPTIONS options for fully parsing RTCMv3 stream
|
|
- fixed logging of RTCM fragments in GPS driver
|
|
- fixed video recording while armed
|
|
- robostness and logging improvements for ExternalAHRS
|
|
- fixed RPM from bdshot on boards with IOMCU
|
|
- fixed accel cal simple to remove unused IMUs
|
|
- fixed float rounding issue in HAL_Linux millis and micros functions
|
|
- fixed loading of defaults.parm parameters for dynamic parameter subtrees
|
|
- fixed discrimination between GHST and CRSF protocols
|
|
- fixed bug in DroneCAN packet parsing for corrupt packets that could cause a crash
|
|
- fixed handling of network sockets in scripting when used after close
|
|
- fixed bit timing of CANFD buses
|
|
|
|
New Autopilots supported
|
|
- YJUAV_A6Ultra
|
|
- AnyLeaf H7
|
|
|
|
- do relay parameter conversion for parachute parameters if ever has been used
|
|
- broaden acceptance criteria for GPS yaw measurement for moving baseline yaw
|
|
|
|
------------------------------------------------------------------
|
|
AntennaTracker 4.5.0 beta1 22-Feb-2024
|
|
Changes from 4.2.0
|
|
1) Innumerable system-level improvements; see Copter and Plane release notes
|
|
2) fix EKF2/EKF3 parameters
|
|
3) improve logging
|
|
------------------------------------------------------------------
|
|
AntennaTracker 4.2.0 beta1 25-May-2022
|
|
Changes from 1.1.0
|
|
1) Many new supported boards
|
|
2) New sensor support
|
|
3) PID improvements
|
|
4) Filtering improvements
|
|
5) Integrate AP_Stats library
|
|
6) Scripting support
|
|
7) Logging improvements
|
|
8) Improvements to GCS communications
|
|
9) Option to scan before vehicle found
|
|
10) Innumerable system-level improvements; see Copter and Plane 4.2 release notes
|
|
------------------------------------------------------------------
|
|
AntennaTracker 1.1.0 3-Aug-2019
|
|
Changes from 1.1.0-rc1
|
|
1) Instantiate battery monitor instance
|
|
2) Correct continuous servo rotation bug
|
|
------------------------------------------------------------------
|
|
AntennaTracker 1.1.0-rc1 26-Apr-2019
|
|
Changes from 1.0.0
|
|
1) ChibiOS support including support for many new flight controllers
|
|
2) Large numbers of architectural changes but few behavioural changes
|
|
3) Battery monitoring enabled
|
|
------------------------------------------------------------------
|
|
AntennaTracker 1.0.0 28-Jul-2016
|
|
Changes from 0.8.0
|
|
1) Compensate for tracker tilt by converting earth-frame angle targets to body-frame servo outputs
|
|
2) Tracker location provided by EKF (still falls back to raw GPS if EKF is unable to provide position estimate)
|
|
3) PITCH_MIN, PITCH_MAX parameters replace PITCH_RANGE
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.8.0 22-Jun-2016
|
|
Changes from 0.7.8
|
|
1) Added PITCH2SRV_FILT, YAW2SRV_FILT added to smooth input to controllers. Lower values lead to more delay but smoother motion.
|
|
2) Estimate vehicle's altitude between telemetry updates when using ALT_SOURCE = GPS
|
|
3) Bug fix to vehicle position estimate (was using vehicle's heading instead of 3D velocity vector)
|
|
4) Added MAV_UPDATE_RATE parameter to allow more easily setting the rate the vehicle sends position data
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.7.8 10-Jun-2016
|
|
Changes from 0.7.7
|
|
1) Bug fix to VBAR dataflash logging
|
|
2) VPOS dataflash logging message captures vehicle position
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.7.7 31-May-2016
|
|
Changes from 0.7.6
|
|
1) SERVO_TYPE parameter split into SERVO_PITCH_TYPE, SERVO_YAW_TYPE to allow different servo types for each axis
|
|
2) ALT_SOURCE parameter added to allow selecting vehicle's GPS as an altitude source instead of vehicle's baro
|
|
3) VBAR dataflash log message added to capture vehicle barometer data
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.7.6 08-Feb-2016
|
|
Changes from 0.7.5
|
|
1) Fix logging of attitude and mode to dataflash
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.7.5 27-Dec-2015
|
|
Changes from 0.7.4
|
|
1) Add dataflash logging
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.7.4 23-Dec-2015
|
|
Changes from 0.7.2
|
|
1) Request baro pressure from vehicle at 1hz
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.7.2 1-Aug-2015
|
|
Changes from 0.7.1
|
|
1) Fixed Pitch
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.7.1 29-May-2015
|
|
Changes from 0.7
|
|
1) Added support for continuous rotation (CR) servos
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.7 17-May-2015
|
|
Changes from 0.5 (skipped 0.6 to avoid confusion after the wrong version number was communicated on diydrones.com)
|
|
1) added support for 4th MAVLink channel
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.5 29-Apr-2015
|
|
Changes from 0.4
|
|
1) add SERVO_TEST mode which moves the servos to the position specified by a do-set-servo command (normally from MP's extended tuning page)
|
|
2) add DISTANCE_MIN parameter (default to 5m). Vehicles must be at least this distance away for the tracker to track them.
|
|
3) add SYSID_TARGET parameter to specify which vehicle to follow which is useful if multiple vehicles are sharing the same network. This param defaults to zero which means track the first vehicle. Set to "0" to track the first vehicle found.
|
|
4) send request to vehicle for position updates at 1hz. Improves reliability when used with copter which won't sent position data by default.
|
|
5) Listens for vehicle position updates on all channels
|
|
6) bug fix for LED on pixhawk so it flashes blue or green (instead of yellow) when waiting for he vehicle's position
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.4 31-Jan-2015
|
|
Changes from 0.3
|
|
1) Init Telem2 port so it can be used to communicate with GCS
|
|
------------------------------------------------------------------
|
|
AntennaTracker 0.3 28-Jan-2015
|
|
Changes from 0.2
|
|
1) MAVLink routing replaces Proxy mode
|
|
------------------------------------------------------------------
|