mirror of https://github.com/ArduPilot/ardupilot
230 lines
7.0 KiB
C++
230 lines
7.0 KiB
C++
#include "Copter.h"
|
|
|
|
Mode::AutoYaw Mode::auto_yaw;
|
|
|
|
// roi_yaw - returns heading towards location held in roi
|
|
float Mode::AutoYaw::roi_yaw()
|
|
{
|
|
roi_yaw_counter++;
|
|
if (roi_yaw_counter >= 4) {
|
|
roi_yaw_counter = 0;
|
|
_roi_yaw = get_bearing_cd(copter.inertial_nav.get_position(), roi);
|
|
}
|
|
|
|
return _roi_yaw;
|
|
}
|
|
|
|
float Mode::AutoYaw::look_ahead_yaw()
|
|
{
|
|
const Vector3f& vel = copter.inertial_nav.get_velocity();
|
|
float speed = norm(vel.x,vel.y);
|
|
// Commanded Yaw to automatically look ahead.
|
|
if (copter.position_ok() && (speed > YAW_LOOK_AHEAD_MIN_SPEED)) {
|
|
_look_ahead_yaw = degrees(atan2f(vel.y,vel.x))*100.0f;
|
|
}
|
|
return _look_ahead_yaw;
|
|
}
|
|
|
|
void Mode::AutoYaw::set_mode_to_default(bool rtl)
|
|
{
|
|
set_mode(default_mode(rtl));
|
|
}
|
|
|
|
// default_mode - returns auto_yaw.mode() based on WP_YAW_BEHAVIOR parameter
|
|
// set rtl parameter to true if this is during an RTL
|
|
autopilot_yaw_mode Mode::AutoYaw::default_mode(bool rtl) const
|
|
{
|
|
switch (copter.g.wp_yaw_behavior) {
|
|
|
|
case WP_YAW_BEHAVIOR_NONE:
|
|
return AUTO_YAW_HOLD;
|
|
|
|
case WP_YAW_BEHAVIOR_LOOK_AT_NEXT_WP_EXCEPT_RTL:
|
|
if (rtl) {
|
|
return AUTO_YAW_HOLD;
|
|
} else {
|
|
return AUTO_YAW_LOOK_AT_NEXT_WP;
|
|
}
|
|
|
|
case WP_YAW_BEHAVIOR_LOOK_AHEAD:
|
|
return AUTO_YAW_LOOK_AHEAD;
|
|
|
|
case WP_YAW_BEHAVIOR_LOOK_AT_NEXT_WP:
|
|
default:
|
|
return AUTO_YAW_LOOK_AT_NEXT_WP;
|
|
}
|
|
}
|
|
|
|
// set_mode - sets the yaw mode for auto
|
|
void Mode::AutoYaw::set_mode(autopilot_yaw_mode yaw_mode)
|
|
{
|
|
// return immediately if no change
|
|
if (_mode == yaw_mode) {
|
|
return;
|
|
}
|
|
_mode = yaw_mode;
|
|
|
|
// perform initialisation
|
|
switch (_mode) {
|
|
|
|
case AUTO_YAW_LOOK_AT_NEXT_WP:
|
|
// wpnav will initialise heading when wpnav's set_destination method is called
|
|
break;
|
|
|
|
case AUTO_YAW_ROI:
|
|
// look ahead until we know otherwise
|
|
_roi_yaw = copter.ahrs.yaw_sensor;
|
|
break;
|
|
|
|
case AUTO_YAW_FIXED:
|
|
// keep heading pointing in the direction held in fixed_yaw
|
|
// caller should set the fixed_yaw
|
|
break;
|
|
|
|
case AUTO_YAW_LOOK_AHEAD:
|
|
// Commanded Yaw to automatically look ahead.
|
|
_look_ahead_yaw = copter.ahrs.yaw_sensor;
|
|
break;
|
|
|
|
case AUTO_YAW_RESETTOARMEDYAW:
|
|
// initial_armed_bearing will be set during arming so no init required
|
|
break;
|
|
|
|
case AUTO_YAW_RATE:
|
|
// initialise target yaw rate to zero
|
|
_rate_cds = 0.0f;
|
|
break;
|
|
|
|
case AUTO_YAW_CIRCLE:
|
|
// no initialisation required
|
|
break;
|
|
}
|
|
}
|
|
|
|
// set_fixed_yaw - sets the yaw look at heading for auto mode
|
|
void Mode::AutoYaw::set_fixed_yaw(float angle_deg, float turn_rate_dps, int8_t direction, bool relative_angle)
|
|
{
|
|
const int32_t curr_yaw_target = copter.attitude_control->get_att_target_euler_cd().z;
|
|
|
|
// calculate final angle as relative to vehicle heading or absolute
|
|
if (!relative_angle) {
|
|
// absolute angle
|
|
_fixed_yaw = wrap_360_cd(angle_deg * 100);
|
|
} else {
|
|
// relative angle
|
|
if (direction < 0) {
|
|
angle_deg = -angle_deg;
|
|
}
|
|
_fixed_yaw = wrap_360_cd((angle_deg * 100) + curr_yaw_target);
|
|
}
|
|
|
|
// get turn speed
|
|
if (is_zero(turn_rate_dps)) {
|
|
// default to regular auto slew rate
|
|
_fixed_yaw_slewrate = AUTO_YAW_SLEW_RATE;
|
|
} else {
|
|
const int32_t turn_rate = (wrap_180_cd(_fixed_yaw - curr_yaw_target) / 100) / turn_rate_dps;
|
|
_fixed_yaw_slewrate = constrain_int32(turn_rate, 1, 360); // deg / sec
|
|
}
|
|
|
|
// set yaw mode
|
|
set_mode(AUTO_YAW_FIXED);
|
|
|
|
// TO-DO: restore support for clockwise and counter clockwise rotation held in cmd.content.yaw.direction. 1 = clockwise, -1 = counterclockwise
|
|
}
|
|
|
|
// set_roi - sets the yaw to look at roi for auto mode
|
|
void Mode::AutoYaw::set_roi(const Location &roi_location)
|
|
{
|
|
// if location is zero lat, lon and altitude turn off ROI
|
|
if (roi_location.alt == 0 && roi_location.lat == 0 && roi_location.lng == 0) {
|
|
// set auto yaw mode back to default assuming the active command is a waypoint command. A more sophisticated method is required to ensure we return to the proper yaw control for the active command
|
|
auto_yaw.set_mode_to_default(false);
|
|
#if MOUNT == ENABLED
|
|
// switch off the camera tracking if enabled
|
|
if (copter.camera_mount.get_mode() == MAV_MOUNT_MODE_GPS_POINT) {
|
|
copter.camera_mount.set_mode_to_default();
|
|
}
|
|
#endif // MOUNT == ENABLED
|
|
} else {
|
|
#if MOUNT == ENABLED
|
|
// check if mount type requires us to rotate the quad
|
|
if (!copter.camera_mount.has_pan_control()) {
|
|
if (roi_location.get_vector_from_origin_NEU(roi)) {
|
|
auto_yaw.set_mode(AUTO_YAW_ROI);
|
|
}
|
|
}
|
|
// send the command to the camera mount
|
|
copter.camera_mount.set_roi_target(roi_location);
|
|
|
|
// TO-DO: expand handling of the do_nav_roi to support all modes of the MAVLink. Currently we only handle mode 4 (see below)
|
|
// 0: do nothing
|
|
// 1: point at next waypoint
|
|
// 2: point at a waypoint taken from WP# parameter (2nd parameter?)
|
|
// 3: point at a location given by alt, lon, lat parameters
|
|
// 4: point at a target given a target id (can't be implemented)
|
|
#else
|
|
// if we have no camera mount aim the quad at the location
|
|
if (roi_location.get_vector_from_origin_NEU(roi)) {
|
|
auto_yaw.set_mode(AUTO_YAW_ROI);
|
|
}
|
|
#endif // MOUNT == ENABLED
|
|
}
|
|
}
|
|
|
|
// set auto yaw rate in centi-degrees per second
|
|
void Mode::AutoYaw::set_rate(float turn_rate_cds)
|
|
{
|
|
set_mode(AUTO_YAW_RATE);
|
|
_rate_cds = turn_rate_cds;
|
|
}
|
|
|
|
// yaw - returns target heading depending upon auto_yaw.mode()
|
|
float Mode::AutoYaw::yaw()
|
|
{
|
|
switch (_mode) {
|
|
|
|
case AUTO_YAW_ROI:
|
|
// point towards a location held in roi
|
|
return roi_yaw();
|
|
|
|
case AUTO_YAW_FIXED:
|
|
// keep heading pointing in the direction held in fixed_yaw
|
|
// with no pilot input allowed
|
|
return _fixed_yaw;
|
|
|
|
case AUTO_YAW_LOOK_AHEAD:
|
|
// Commanded Yaw to automatically look ahead.
|
|
return look_ahead_yaw();
|
|
|
|
case AUTO_YAW_RESETTOARMEDYAW:
|
|
// changes yaw to be same as when quad was armed
|
|
return copter.initial_armed_bearing;
|
|
|
|
case AUTO_YAW_CIRCLE:
|
|
if (copter.circle_nav->is_active()) {
|
|
return copter.circle_nav->get_yaw();
|
|
}
|
|
// return the current attitude target
|
|
return wrap_360_cd(copter.attitude_control->get_att_target_euler_cd().z);
|
|
|
|
case AUTO_YAW_LOOK_AT_NEXT_WP:
|
|
default:
|
|
// point towards next waypoint.
|
|
// we don't use wp_bearing because we don't want the copter to turn too much during flight
|
|
return copter.wp_nav->get_yaw();
|
|
}
|
|
}
|
|
|
|
// returns yaw rate normally set by SET_POSITION_TARGET mavlink
|
|
// messages (positive is clockwise, negative is counter clockwise)
|
|
float Mode::AutoYaw::rate_cds() const
|
|
{
|
|
if (_mode == AUTO_YAW_RATE) {
|
|
return _rate_cds;
|
|
}
|
|
|
|
// return zero turn rate (this should never happen)
|
|
return 0.0f;
|
|
}
|