| .. |
|
APM_Config.h
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
AP_Arming.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
AP_Arming.h
|
…
|
|
|
AP_ExternalControl_Copter.cpp
|
ArduCopter: enabled sending waypoints from a companion computer to ardupilot for copter and rover
|
2024-05-02 09:08:34 +09:00 |
|
AP_ExternalControl_Copter.h
|
ArduCopter: enabled sending waypoints from a companion computer to ardupilot for copter and rover
|
2024-05-02 09:08:34 +09:00 |
|
AP_Rally.cpp
|
…
|
|
|
AP_Rally.h
|
…
|
|
|
AP_State.cpp
|
…
|
|
|
Attitude.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
Copter.cpp
|
ArduCopter: re-order initialiser lines so -Werror=reorder will work
|
2024-09-24 22:50:28 +10:00 |
|
Copter.h
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
GCS_Copter.cpp
|
ArduCopter: make AP_RANGEFINDER_ENABLED remove more code
|
2024-07-02 09:17:26 +10:00 |
|
GCS_Copter.h
|
ArduCopter: use NEW_NOTHROW for new(std::nothrow)
|
2024-06-04 09:20:21 +10:00 |
|
GCS_Mavlink.cpp
|
ArduCopter: only send airspeed when enabled
|
2024-09-23 18:53:27 +10:00 |
|
GCS_Mavlink.h
|
Copter: factor out methods for guided-mode commands
|
2024-04-14 13:19:07 +10:00 |
|
Log.cpp
|
Copter: log ANG attitude message
|
2024-09-17 10:12:35 +10:00 |
|
Makefile.waf
|
…
|
|
|
Parameters.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
Parameters.h
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
RC_Channel.cpp
|
ArduCopter: remove AUX_FUNC entries based on feature defines
|
2024-09-08 00:55:43 +10:00 |
|
RC_Channel.h
|
…
|
|
|
ReleaseNotes.txt
|
Copter: 4.5.6 release notes
|
2024-09-04 08:06:25 +09:00 |
|
UserCode.cpp
|
…
|
|
|
UserParameters.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
UserParameters.h
|
…
|
|
|
UserVariables.h
|
…
|
|
|
afs_copter.cpp
|
Copter: add and use new `afs_mode` mode method
|
2024-09-24 09:45:01 +09:00 |
|
afs_copter.h
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
autoyaw.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
avoidance.cpp
|
ArduCopter: move AC_Avoidance defines into libraries
|
2024-03-11 18:07:18 +11:00 |
|
avoidance_adsb.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
avoidance_adsb.h
|
…
|
|
|
baro_ground_effect.cpp
|
…
|
|
|
commands.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
compassmot.cpp
|
Copter: send RC_CHANNELS in SITL in compassmot loop
|
2024-04-16 19:14:38 +10:00 |
|
config.h
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
crash_check.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
defines.h
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
ekf_check.cpp
|
…
|
|
|
esc_calibration.cpp
|
…
|
|
|
events.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
failsafe.cpp
|
Copter: The failsafe enable flag should be cleared on cold reset
|
2024-09-16 08:50:24 +09:00 |
|
fence.cpp
|
Copter: address minor review comments
|
2024-07-24 08:24:06 +10:00 |
|
heli.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
inertia.cpp
|
…
|
|
|
land_detector.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
landing_gear.cpp
|
ArduCopter: make AP_RANGEFINDER_ENABLED remove more code
|
2024-07-02 09:17:26 +10:00 |
|
mode.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode.h
|
Copter: add and use new `afs_mode` mode method
|
2024-09-24 09:45:01 +09:00 |
|
mode_acro.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_acro_heli.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_althold.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_auto.cpp
|
Copter: mode_auto: remove more code based on defines
|
2024-09-24 09:26:31 +10:00 |
|
mode_autorotate.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_autotune.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_avoid_adsb.cpp
|
…
|
|
|
mode_brake.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_circle.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_drift.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_flip.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_flowhold.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_follow.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_guided.cpp
|
Copter: guided: `set_angle` call `init_z_controller` when changing from thrust to climb rate control to avoid flow of control error
|
2024-09-24 22:50:44 +10:00 |
|
mode_guided_nogps.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_land.cpp
|
Copter: disable fences for landing by suppressing in the fence check rather than using a state machine
|
2024-07-24 08:24:06 +10:00 |
|
mode_loiter.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_poshold.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_rtl.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_smart_rtl.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_sport.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_stabilize.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_stabilize_heli.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_systemid.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
mode_throw.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_turtle.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
mode_zigzag.cpp
|
Copter: don't pass `channel_yaw->norm_input_dz()` into `get_pilot_desired_yaw_rate`
|
2024-09-22 08:40:12 +09:00 |
|
motor_test.cpp
|
…
|
|
|
motors.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
navigation.cpp
|
…
|
|
|
precision_landing.cpp
|
ArduCopter: correct initialisation of PrecLand buffers
|
2024-09-24 10:56:57 +09:00 |
|
radio.cpp
|
ArduCopter: avoid nullptr dereference on bad rcmap value entry
|
2024-09-10 22:00:50 +10:00 |
|
sensors.cpp
|
ArduCopter: make AP_RANGEFINDER_ENABLED remove more code
|
2024-07-02 09:17:26 +10:00 |
|
standby.cpp
|
…
|
|
|
surface_tracking.cpp
|
Copter: remove unused #if around rangefinder
|
2024-07-08 10:38:17 +10:00 |
|
system.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
takeoff.cpp
|
Copter: auto mode takeoff complete pos fix
|
2024-09-11 08:44:45 +09:00 |
|
takeoff_check.cpp
|
…
|
|
|
terrain.cpp
|
ArduCopter: make AP_RANGEFINDER_ENABLED remove more code
|
2024-07-02 09:17:26 +10:00 |
|
toy_mode.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
toy_mode.h
|
…
|
|
|
tuning.cpp
|
Copter: remove ENABLE/ENABLED/DISABLE/DISABLED defines
|
2024-09-06 11:53:09 +10:00 |
|
version.h
|
ArduCopter: fix version setting in CheckFirmware app descriptor
|
2024-02-21 18:54:17 +11:00 |
|
wscript
|
Copter: use new surface distance library
|
2024-05-28 09:55:36 +10:00 |
a4753f32ac