.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
Copter: disable RALLY points by default
|
2014-04-30 21:46:21 +09:00 |
APM_Config_mavlink_hil.h
|
Copter: convert to new GPS API
|
2014-04-01 06:38:24 +11:00 |
AP_State.pde
|
Copter: replace takeoff_complete with landed_complete
|
2014-02-15 05:27:43 +11:00 |
ArduCopter.pde
|
Copter: integrate AC_WPNav get_speed_xy name change
|
2014-04-30 21:46:07 +09:00 |
Attitude.pde
|
Copter: convert to new GPS API
|
2014-04-01 06:38:24 +11:00 |
GCS_Mavlink.pde
|
Copter: add mavlink motor_test
|
2014-04-29 11:31:45 +09:00 |
Log.pde
|
Copter: fix typo in Log_Write_Baro
|
2014-04-30 08:50:51 +09:00 |
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
Parameters.h
|
Copter: add PILOT_ACCEL_Z parameter
|
2014-04-30 21:46:13 +09:00 |
Parameters.pde
|
Copter: add EKF to Ch7/Ch8 Opt parameter description
|
2014-05-02 10:02:23 +09:00 |
ReleaseNotes.txt
|
Copter: update release notes for AC3.1.4-rc1
|
2014-05-02 14:23:13 +09:00 |
UserCode.pde
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
UserVariables.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
command_description.txt
|
Copter: fixup line endings to be newline
|
2014-04-15 15:54:13 +09:00 |
commands.pde
|
Copter: convert to new GPS API
|
2014-04-01 06:38:24 +11:00 |
commands_logic.pde
|
Copter: integrate AC_WPNav get_speed_xy name change
|
2014-04-30 21:46:07 +09:00 |
compassmot.pde
|
Copter: consider health of primary compass in SYS_STATUS, pre-arm and compassmot
|
2014-03-24 19:52:08 +11:00 |
compat.h
|
Copter LEDs: replace bitRead with bitmask
|
2013-04-01 13:10:12 +09:00 |
compat.pde
|
Copter: remove unused compat.pde entries
|
2014-01-30 14:33:55 +09:00 |
config.h
|
Copter: disable RALLY points by default
|
2014-04-30 21:46:21 +09:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_acro.pde
|
Copter: integrate AttControl method name changes
|
2014-02-15 06:09:08 +11:00 |
control_althold.pde
|
Copter: init pos_control z-axis after setting speed and accel
|
2014-04-30 21:46:17 +09:00 |
control_auto.pde
|
Copter: bug fix for when WP_YAW_BEHAVIOR is 0
|
2014-04-17 16:53:06 +09:00 |
control_autotune.pde
|
Copter: init pos_control z-axis after setting speed and accel
|
2014-04-30 21:46:17 +09:00 |
control_circle.pde
|
Copter: init vert speed and accel for each flight mode
|
2014-04-30 21:46:10 +09:00 |
control_drift.pde
|
Drift: get velocity using const reference
|
2014-04-14 11:34:17 +09:00 |
control_flip.pde
|
Copter: integrate AttControl method name changes
|
2014-02-15 06:09:08 +11:00 |
control_guided.pde
|
Copter: remove original_wp_bearing
|
2014-03-28 09:23:21 +09:00 |
control_hybrid.pde
|
Copter: init pos_control z-axis after setting speed and accel
|
2014-04-30 21:46:17 +09:00 |
control_land.pde
|
Copter: init pos_control z-axis after setting speed and accel
|
2014-04-30 21:46:17 +09:00 |
control_loiter.pde
|
Copter: init vert speed and accel for each flight mode
|
2014-04-30 21:46:10 +09:00 |
control_modes.pde
|
Copter: log parachute events
|
2014-04-07 13:36:59 +09:00 |
control_ofloiter.pde
|
Copter: init pos_control z-axis after setting speed and accel
|
2014-04-30 21:46:17 +09:00 |
control_rtl.pde
|
Copter: RTL alt should not be above fence alt
|
2014-04-27 15:41:37 +09:00 |
control_sport.pde
|
Copter: init vert speed and accel for each flight mode
|
2014-04-30 21:46:10 +09:00 |
control_stabilize.pde
|
Copter: integrate smoothing gain into flight modes
|
2014-03-04 22:23:52 +09:00 |
crash_check.pde
|
Copter: check parachute is enabled before manual_release
|
2014-04-07 13:37:15 +09:00 |
defines.h
|
Copter: integrate skeleton Hybrid mode
|
2014-04-23 14:59:17 +09:00 |
events.pde
|
Copter: GPS failsafe ensures LAND is pilot-controlled
|
2014-04-27 15:11:47 +09:00 |
failsafe.pde
|
Copter: updates for AP_HAL::MemberProc
|
2013-09-30 21:06:43 +10:00 |
fence.pde
|
Copter: remove unused variables from fence.pde
|
2014-04-27 11:11:12 +09:00 |
flight_mode.pde
|
Copter: integrate 10sec manual recovery after fence breach
|
2014-04-27 11:11:09 +09:00 |
heli.pde
|
TradHeli: remove use of throttle_mode
|
2014-02-15 05:27:47 +11:00 |
heli_control_acro.pde
|
TradHeli: integrate AttControl method name changes
|
2014-02-15 06:09:08 +11:00 |
heli_control_stabilize.pde
|
Copter: integrate smoothing gain into flight modes
|
2014-03-04 22:23:52 +09:00 |
inertia.pde
|
Copter: combine NTUN and INAV dataflash msgs
|
2014-01-13 22:00:11 +09:00 |
leds.pde
|
Copter: remove CopterLED from main code
|
2013-11-30 18:20:55 +09:00 |
motor_test.pde
|
Copter: add mavlink motor_test
|
2014-04-29 11:31:45 +09:00 |
motors.pde
|
Copter: add mavlink motor_test
|
2014-04-29 11:31:45 +09:00 |
navigation.pde
|
Copter: bug fix for conditional_distance command
|
2014-04-17 22:23:28 +09:00 |
nocore.inoflag
|
ArduCopter: add nocore.inoflag and Arduino.h
|
2012-12-20 14:51:40 +11:00 |
perf_info.pde
|
Copter: bug fix display of PerfMon log's num long loops
|
2014-03-08 15:17:03 +09:00 |
position_vector.pde
|
Copter/position_vector: remove const specifiers on objects returned by
|
2013-10-27 13:41:46 +09:00 |
radio.pde
|
Copter: enable passthrough auxillary channels
|
2014-04-03 12:19:44 +11:00 |
readme.txt
|
Copter: readme file renamed and directs to wiki
|
2014-02-12 21:03:45 +09:00 |
sensors.pde
|
Copter: use Log_Write_Baro()
|
2014-02-19 09:22:45 +11:00 |
setup.pde
|
Copter: move report_compass out of the CLI
|
2014-03-05 12:01:45 +09:00 |
system.pde
|
Copter: set AHRS vehicle class
|
2014-04-21 18:13:13 +10:00 |
test.pde
|
Copter: remove cli motor test
|
2014-04-29 11:41:17 +09:00 |