mirror of https://github.com/ArduPilot/ardupilot
390 lines
15 KiB
C++
390 lines
15 KiB
C++
/*
|
|
Viewpro gimbal driver using custom serial protocol
|
|
|
|
Packet format (courtesy of Viewpro's SDK document)
|
|
|
|
-------------------------------------------------------------------------------------------
|
|
Field Index Bytes Description
|
|
-------------------------------------------------------------------------------------------
|
|
Header 0~2 3 0x55 0xAA 0xDC
|
|
Length 3 1 bit0~5: body length, n=all bytes from byte3 to checksum, min=4, max=63
|
|
bits6~7: frame counter (increment by 1 compared to previous message sent)
|
|
Frame Id 4 1
|
|
Data 5~n+1 n 1st byte is command id (?)
|
|
Checksum n+2 1 XOR of byte3 to n+1 (inclusive)
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "AP_Mount_Backend.h"
|
|
|
|
#if HAL_MOUNT_VIEWPRO_ENABLED
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include <AP_Math/AP_Math.h>
|
|
#include <AP_Common/AP_Common.h>
|
|
#include <AP_HAL/utility/sparse-endian.h>
|
|
|
|
#define AP_MOUNT_VIEWPRO_PACKETLEN_MAX 63 // maximum number of bytes in a packet sent to or received from the gimbal
|
|
|
|
class AP_Mount_Viewpro : public AP_Mount_Backend
|
|
{
|
|
|
|
public:
|
|
// Constructor
|
|
using AP_Mount_Backend::AP_Mount_Backend;
|
|
|
|
/* Do not allow copies */
|
|
CLASS_NO_COPY(AP_Mount_Viewpro);
|
|
|
|
// init - performs any required initialisation for this instance
|
|
void init() override;
|
|
|
|
// update mount position - should be called periodically
|
|
void update() override;
|
|
|
|
// return true if healthy
|
|
bool healthy() const override;
|
|
|
|
// return true if this mount accepts roll targets
|
|
bool has_roll_control() const override { return false; }
|
|
|
|
// has_pan_control - returns true if this mount can control its pan (required for multicopters)
|
|
bool has_pan_control() const override { return yaw_range_valid(); };
|
|
|
|
//
|
|
// camera controls
|
|
//
|
|
|
|
// take a picture. returns true on success
|
|
bool take_picture() override;
|
|
|
|
// start or stop video recording
|
|
// set start_recording = true to start record, false to stop recording
|
|
bool record_video(bool start_recording) override;
|
|
|
|
// set zoom specified as a rate or percentage
|
|
bool set_zoom(ZoomType zoom_type, float zoom_value) override;
|
|
|
|
// set focus specified as rate, percentage or auto
|
|
// focus in = -1, focus hold = 0, focus out = 1
|
|
SetFocusResult set_focus(FocusType focus_type, float focus_value) override;
|
|
|
|
// set tracking to none, point or rectangle (see TrackingType enum)
|
|
// if POINT only p1 is used, if RECTANGLE then p1 is top-left, p2 is bottom-right
|
|
// p1,p2 are in range 0 to 1. 0 is left or top, 1 is right or bottom
|
|
bool set_tracking(TrackingType tracking_type, const Vector2f& p1, const Vector2f& p2) override;
|
|
|
|
// set camera lens as a value from 0 to 5
|
|
bool set_lens(uint8_t lens) override;
|
|
|
|
// send camera information message to GCS
|
|
void send_camera_information(mavlink_channel_t chan) const override;
|
|
|
|
// send camera settings message to GCS
|
|
void send_camera_settings(mavlink_channel_t chan) const override;
|
|
|
|
protected:
|
|
|
|
// get attitude as a quaternion. returns true on success
|
|
bool get_attitude_quaternion(Quaternion& att_quat) override;
|
|
|
|
private:
|
|
|
|
// send text prefix string to reduce flash cost
|
|
static const char* send_text_prefix;
|
|
|
|
// packet frame ids
|
|
enum class FrameId : uint8_t {
|
|
HANDSHAKE = 0x00, // handshake sent to gimbal
|
|
U = 0x01, // communication configuration control (this packet is sent to gimbal)
|
|
V = 0x02, // communication configuration status (this is the reply to U)
|
|
HEARTBEAT = 0x10, // heartbeat received from gimbal
|
|
A1 = 0x1A, // target angles (sent)
|
|
C1 = 0x1C, // camera controls commonly used (sent)
|
|
E1 = 0x1E, // tracking controls commonly used (sent)
|
|
C2 = 0x2C, // camera controls infrequently used (sent)
|
|
E2 = 0x2E, // tracking controls infrequently used (sent)
|
|
T1_F1_B1_D1 = 0x40, // actual roll, pitch, yaw angles (received)
|
|
M_AHRS = 0xB1, // vehicle attitude and position (sent)
|
|
};
|
|
|
|
// U communication configuration control commands
|
|
enum class CommConfigCmd : uint8_t {
|
|
QUERY_FIRMWARE_VER = 0xD0,
|
|
QUERY_MODEL = 0xE4,
|
|
};
|
|
|
|
// A1 servo status enum (used in A1, B1 packets)
|
|
enum class ServoStatus : uint8_t {
|
|
MANUAL_SPEED_MODE = 0x01,
|
|
FOLLOW_YAW = 0x03,
|
|
MANUAL_ABSOLUTE_ANGLE_MODE = 0x0B,
|
|
FOLLOW_YAW_DISABLE = 0x0A,
|
|
};
|
|
|
|
// C1 image sensor choice
|
|
enum class ImageSensor : uint8_t {
|
|
NO_ACTION = 0x00, // no image sensor is affected
|
|
EO1 = 0x01, // electro-optical, aka rgb
|
|
IR = 0x02, // infrared, aka thermal
|
|
EO1_IR_PIP = 0x03, // rgb is main, IR is picture-in-picture
|
|
IR_EO1_PIP = 0x04, // thermal is main, rgb is picture-in-picture
|
|
FUSION = 0x05, // rgb and thermal are fused
|
|
IR1_13MM = 0x06, // only valid for 1352 module
|
|
IR2_52MM = 0x07, // only valid for 1352 module
|
|
};
|
|
|
|
// C1 camera commands
|
|
enum class CameraCommand : uint8_t {
|
|
NO_ACTION = 0x00,
|
|
STOP_FOCUS_AND_ZOOM = 0x01,
|
|
ZOOM_OUT = 0x08,
|
|
ZOOM_IN = 0x09,
|
|
FOCUS_PLUS = 0x0A,
|
|
FOCUS_MINUS = 0x0B,
|
|
TAKE_PICTURE = 0x13,
|
|
START_RECORD = 0x14,
|
|
STOP_RECORD = 0x15,
|
|
AUTO_FOCUS = 0x19,
|
|
MANUAL_FOCUS = 0x1A
|
|
};
|
|
|
|
// C2 camera commands
|
|
enum class CameraCommand2 : uint8_t {
|
|
SET_EO_ZOOM = 0x53
|
|
};
|
|
|
|
// D1 recording status (received from gimbal)
|
|
enum class RecordingStatus : uint8_t {
|
|
RECORDING_STOPPED = 0x00,
|
|
RECORDING = 0x01,
|
|
PICTURE_MODE = 0x02
|
|
};
|
|
|
|
// E1 tracking commands
|
|
enum class TrackingCommand : uint8_t {
|
|
STOP = 0x01,
|
|
START = 0x03,
|
|
SET_POINT = 0x0A,
|
|
SET_RECT_TOPLEFT = 0x0B,
|
|
SET_RECT_BOTTOMRIGHT = 0x0C,
|
|
};
|
|
|
|
// E1 tracking source (e.g. which camera)
|
|
enum class TrackingSource : uint8_t {
|
|
EO1 = 0x01, // electro-optical, aka rgb
|
|
IR = 0x02, // infrared, aka thermal
|
|
EO2 = 0x03, // electro-optical, aka rgb
|
|
};
|
|
|
|
// E2 tracking commands2
|
|
enum class TrackingCommand2 : uint8_t {
|
|
SET_POINT = 0x0A,
|
|
SET_RECT_TOPLEFT = 0x0B,
|
|
SET_RECT_BOTTOMRIGHT = 0x0C,
|
|
};
|
|
|
|
// F1 tracking status (received from gimbal)
|
|
enum class TrackingStatus : uint8_t {
|
|
STOPPED = 0x00, // not tracking
|
|
SEARCHING = 0x01, // searching
|
|
TRACKING = 0x02, // locked onto a target
|
|
LOST = 0x03, // lost target
|
|
};
|
|
|
|
// parsing state
|
|
enum class ParseState : uint8_t {
|
|
WAITING_FOR_HEADER1,
|
|
WAITING_FOR_HEADER2,
|
|
WAITING_FOR_HEADER3,
|
|
WAITING_FOR_LENGTH,
|
|
WAITING_FOR_FRAMEID,
|
|
WAITING_FOR_DATA,
|
|
WAITING_FOR_CRC
|
|
};
|
|
|
|
// packet formats
|
|
union HandshakePacket {
|
|
struct {
|
|
FrameId frame_id; // always 0x00
|
|
uint8_t unused; // always 0x00
|
|
} content;
|
|
uint8_t bytes[sizeof(content)];
|
|
};
|
|
|
|
// U packed used to send communication configuration control commands
|
|
// gimbal replies with V packet
|
|
union UPacket {
|
|
struct {
|
|
FrameId frame_id; // always 0x01
|
|
CommConfigCmd control_cmd; // see CommConfigCmd enum above
|
|
uint8_t params[9]; // parameters (unused)
|
|
} content;
|
|
uint8_t bytes[sizeof(content)];
|
|
};
|
|
|
|
// A1 used to send target angles and rates
|
|
union A1Packet {
|
|
struct {
|
|
FrameId frame_id; // always 0x1A
|
|
ServoStatus servo_status; // see ServoStatus enum above
|
|
be16_t yaw_be; // target yaw angle or rate msb
|
|
be16_t pitch_be; // target pitch angle or rate msb
|
|
uint8_t unused[4]; // unused
|
|
} content;
|
|
uint8_t bytes[sizeof(content)];
|
|
};
|
|
|
|
// C1 used to send camera commands (commonly used)
|
|
union C1Packet {
|
|
struct PACKED {
|
|
FrameId frame_id; // always 0x1C
|
|
be16_t sensor_zoom_cmd_be;
|
|
} content;
|
|
uint8_t bytes[sizeof(content)];
|
|
};
|
|
|
|
// C2 used to send camera commands (less commonly used)
|
|
union C2Packet {
|
|
struct {
|
|
FrameId frame_id; // always 0x2C
|
|
CameraCommand2 cmd; // see CameraCommand2 enum above
|
|
be16_t value_be; // value
|
|
} content;
|
|
uint8_t bytes[sizeof(content)];
|
|
};
|
|
|
|
// E1 used to send tracking commands
|
|
union E1Packet {
|
|
struct {
|
|
FrameId frame_id; // always 0x1E
|
|
TrackingSource source : 3; // see TrackingSource enum above
|
|
uint8_t unused : 5; // param1 (unused)
|
|
TrackingCommand cmd; // see TrackingCommand enum above
|
|
uint8_t param2; // param2
|
|
} content;
|
|
uint8_t bytes[sizeof(content)];
|
|
};
|
|
|
|
// E2 used to send tracking commands2
|
|
union E2Packet {
|
|
struct {
|
|
FrameId frame_id; // always 0x2E
|
|
TrackingCommand2 cmd; // see TrackingCommand2 enum above
|
|
be16_t param1_be;
|
|
be16_t param2_be;
|
|
} content;
|
|
uint8_t bytes[sizeof(content)];
|
|
};
|
|
|
|
// M_AHRS used to send vehicle attitude and position to gimbal
|
|
union M_AHRSPacket {
|
|
struct PACKED {
|
|
FrameId frame_id; // always 0xB1
|
|
uint8_t data_type; // should be 0x07. Bit0: Attitude, Bit1: GPS, Bit2 Gyro
|
|
uint8_t unused2to8[7]; // unused
|
|
be16_t pitch_be; // vehicle pitch angle. 1bit=360deg/65536
|
|
be16_t roll_be; // vehicle roll angle. 1bit=360deg/65536
|
|
be16_t yaw_be; // vehicle yaw angle. 1bit=360deg/65536
|
|
be16_t date_be; // bit0~6:year, bit7~10:month, bit11~15:day
|
|
uint8_t seconds_utc[3]; // seconds. 1bit = 0.01sec
|
|
be16_t gps_yaw_be; // GPS yaw
|
|
uint8_t position_mark_bitmask; // bit0:new position, bit1:clock fix calced, bit2:horiz calced, bit3:alt calced
|
|
be32_t latitude_be; // latitude. 1bit = 10e-7
|
|
be32_t longitude_be; // longitude. 1bit = 10e-7
|
|
be32_t height_be; // height. 1bit = 1mm
|
|
be16_t ground_speed_N_be; // ground speed in North direction. 1bit = 0.01m/s
|
|
be16_t ground_speed_E_be; // ground speed in East direction. 1bit = 0.01m/s
|
|
be16_t vdop_be; // GPS vdop. 1bit = 0.01
|
|
be16_t ground_speed_D_be; // speed downwards. 1bit = 0.01m/s
|
|
} content;
|
|
uint8_t bytes[sizeof(content)];
|
|
};
|
|
|
|
// reading incoming packets from gimbal and confirm they are of the correct format
|
|
// results are held in the _parsed_msg structure
|
|
void read_incoming_packets();
|
|
|
|
// process successfully decoded packets held in the _parsed_msg structure
|
|
void process_packet();
|
|
|
|
// calculate crc of the received message
|
|
uint8_t calc_crc(const uint8_t *buf, uint8_t length) const;
|
|
|
|
// get the length and frame count byte (3rd byte of all messages)
|
|
// length is all bytes after the header including CRC
|
|
uint8_t get_length_and_frame_count_byte(uint8_t length);
|
|
|
|
// send packet to gimbal
|
|
// returns true on success, false if outgoing serial buffer is full
|
|
bool send_packet(const uint8_t* databuff, uint8_t databuff_len);
|
|
|
|
// send handshake, gimbal will respond with T1_F1_B1_D1 packet that includes current angles
|
|
void send_handshake();
|
|
|
|
// set gimbal's lock vs follow mode
|
|
// lock should be true if gimbal should maintain an earth-frame target
|
|
// lock is false to follow / maintain a body-frame target
|
|
bool set_lock(bool lock);
|
|
|
|
// send communication configuration command (aka U packet), gimbal will respond with a V packet
|
|
bool send_comm_config_cmd(CommConfigCmd cmd);
|
|
|
|
// send target pitch and yaw rates to gimbal
|
|
// yaw_is_ef should be true if yaw_rads target is an earth frame rate, false if body_frame
|
|
bool send_target_rates(float pitch_rads, float yaw_rads, bool yaw_is_ef);
|
|
|
|
// send target pitch and yaw angles to gimbal
|
|
// yaw_is_ef should be true if yaw_rad target is an earth frame angle, false if body_frame
|
|
bool send_target_angles(float pitch_rad, float yaw_rad, bool yaw_is_ef);
|
|
|
|
// send camera command, affected image sensor and value (e.g. zoom speed)
|
|
bool send_camera_command(ImageSensor img_sensor, CameraCommand cmd, uint8_t value);
|
|
|
|
// send camera command2 and corresponding value (e.g. zoom as absolute value)
|
|
bool send_camera_command2(CameraCommand2 cmd, uint16_t value);
|
|
|
|
// send tracking command and corresponding value (normally zero)
|
|
bool send_tracking_command(TrackingCommand cmd, uint8_t value);
|
|
|
|
// send camera command2 and corresponding parameter values
|
|
bool send_tracking_command2(TrackingCommand2 cmd, uint16_t param1, uint16_t param2);
|
|
|
|
// send vehicle attitude and position to gimbal
|
|
bool send_m_ahrs();
|
|
|
|
// internal variables
|
|
AP_HAL::UARTDriver *_uart; // uart connected to gimbal
|
|
bool _initialised; // true once the driver has been initialised
|
|
uint8_t _msg_buff[AP_MOUNT_VIEWPRO_PACKETLEN_MAX]; // buffer holding latest bytes from gimbal
|
|
uint8_t _msg_buff_len; // number of bytes held in msg buff
|
|
const uint8_t _msg_buff_data_start = 2; // data starts at this byte of _msg_buff
|
|
|
|
// parser state and unpacked fields
|
|
struct {
|
|
uint8_t data_len; // expected number of data bytes
|
|
uint8_t frame_id; // frame id (equivalent to command id)
|
|
uint16_t data_bytes_received; // number of data bytes received so far
|
|
uint8_t crc; // latest message's crc
|
|
ParseState state; // state of incoming message processing
|
|
} _parsed_msg;
|
|
|
|
// variables for sending packets to gimbal
|
|
uint8_t _last_frame_counter; // frame counter sent in last message
|
|
uint32_t _last_update_ms; // system time (in milliseconds) that angle or rate targets were last sent
|
|
Vector3f _current_angle_rad; // current angles in radians received from gimbal (x=roll, y=pitch, z=yaw)
|
|
uint32_t _last_current_angle_rad_ms; // system time _current_angle_rad was updated (used for health reporting)
|
|
bool _recording; // recording status received from gimbal
|
|
bool _last_lock; // last lock mode sent to gimbal
|
|
TrackingStatus _last_tracking_status; // last tracking status received from gimbal (used to notify users)
|
|
ImageSensor _image_sensor; // user selected image sensor (aka camera lens)
|
|
float _zoom_times; // zoom times received from gimbal
|
|
uint32_t _firmware_version; // firmware version from gimbal
|
|
bool _got_firmware_version; // true once we have received the firmware version
|
|
uint8_t _model_name[11] {}; // model name received from gimbal
|
|
bool _got_model_name; // true once we have received model name
|
|
};
|
|
|
|
#endif // HAL_MOUNT_VIEWPRO_ENABLED
|