.. |
APM_Config.h
|
Plane : Add data logging for optical flow use with EKF
|
2014-12-06 18:16:48 +11:00 |
APM_Config.h.reference
|
Plane: cleanup HIL defines
|
2014-02-15 05:29:46 +11:00 |
ArduPlane.pde
|
Plane: removed unnecessary prototype
|
2015-03-13 11:21:47 +11:00 |
Attitude.pde
|
Plane: isFlying redesign
|
2015-03-13 11:06:54 +11:00 |
GCS_Mavlink.pde
|
Plane: send EKF_STATUS_REPORT in extra3 stream
|
2015-03-12 13:43:58 +09:00 |
Log.pde
|
Plane: Change Compass logging to new DataFlash method that handles instances.
|
2015-01-21 14:37:54 +09:00 |
Makefile
|
Plane: cleanup cruft in Makefile
|
2013-10-13 21:41:01 +11:00 |
Parameters.h
|
Plane: Make radio trim optional at ground start.
|
2015-03-13 13:11:44 +11:00 |
Parameters.pde
|
Plane: Make radio trim optional at ground start.
|
2015-03-13 13:11:44 +11:00 |
altitude.pde
|
Plane: fixed issue where auto is entered before GPS lock
|
2015-02-25 22:54:52 +11:00 |
climb_rate.pde
|
uncrustify ArduPlane/climb_rate.pde
|
2012-08-21 18:57:21 -07:00 |
command_description.txt
|
Cleanup: rename files with spaces in their names, replace with underscores
|
2012-02-28 16:14:31 -08:00 |
commands.pde
|
Plane: support DO_SET_HOME MAVLink command
|
2015-02-21 10:14:18 +11:00 |
commands_logic.pde
|
Plane: fixed issue where auto is entered before GPS lock
|
2015-02-25 22:54:52 +11:00 |
commands_process.pde
|
Plane: support DO_SET_HOME MAVLink command
|
2015-02-21 10:14:18 +11:00 |
compat.h
|
Plane: fix for HAL_GPIO_*
|
2014-06-02 10:42:36 +10:00 |
compat.pde
|
Plane: removed unused function
|
2014-10-30 18:23:29 +11:00 |
config.h
|
Plane: integrate SerialManager
|
2015-01-29 14:05:15 +11:00 |
control_modes.pde
|
Plane: use hal.util soft_armed state
|
2015-02-11 20:57:27 +11:00 |
createTags
|
imported ArduPlane from ArduPilotMega svn
|
2011-09-09 11:29:39 +10:00 |
defines.h
|
Plane: integrate SerialManager
|
2015-01-29 14:05:15 +11:00 |
events.pde
|
ArduPlane: attempt to send GCS a message when the GCS heartbeat is not detected.
|
2014-08-07 12:54:47 +10:00 |
failsafe.pde
|
Plane: no need to set flaperons separately from flaperon_update()
|
2014-11-19 21:32:49 +11:00 |
geofence.pde
|
Plane: update for APM_OBC API change
|
2014-08-17 09:13:29 +10:00 |
landing.pde
|
Plane: handle very steep landings more gracefully
|
2015-02-03 16:44:28 +11:00 |
navigation.pde
|
Plane: use location_path_proportion()
|
2015-01-01 15:17:45 +11:00 |
nocore.inoflag
|
ArduPlane: Ported to AP_HAL
|
2012-12-20 14:51:36 +11:00 |
px4_mixer.pde
|
Plane: reduce the frame size of setup_failsafe_mixing()
|
2015-01-09 11:38:15 +11:00 |
radio.pde
|
Plane: log mode on arming
|
2015-02-23 14:15:14 +11:00 |
release-notes.txt
|
Plane: update release notes
|
2015-02-10 09:53:30 +11:00 |
sensors.pde
|
Plane: changed for new AP_Airspeed API
|
2014-11-13 21:12:59 +11:00 |
setup.pde
|
Plane: removed 1D accel calibration
|
2015-03-12 12:50:29 +11:00 |
system.pde
|
Plane: Make radio trim optional at ground start.
|
2015-03-13 13:11:44 +11:00 |
takeoff.pde
|
Plane: fixed to allow TKOFF_THR_DELAY up to 12.7 seconds
|
2015-02-21 20:23:22 +11:00 |
test.pde
|
Plane: updates for new AP_Baro API
|
2015-01-09 11:50:54 +11:00 |