ardupilot/libraries/AP_Compass/AP_Compass_LSM9DS1.cpp

#include "AP_Compass_LSM9DS1.h"

#if AP_COMPASS_LSM9DS1_ENABLED

#include <AP_Math/AP_Math.h>
#include <AP_HAL/AP_HAL.h>

#define LSM9DS1M_OFFSET_X_REG_L_M   0x05
#define LSM9DS1M_OFFSET_X_REG_H_M   0x06
#define LSM9DS1M_OFFSET_Y_REG_L_M   0x07
#define LSM9DS1M_OFFSET_Y_REG_H_M   0x08
#define LSM9DS1M_OFFSET_Z_REG_L_M   0x09
#define LSM9DS1M_OFFSET_Z_REG_H_M   0x0A

#define LSM9DS1M_WHO_AM_I           0x0F
    #define WHO_AM_I_MAG            0x3D

#define LSM9DS1M_CTRL_REG1_M        0x20
    #define LSM9DS1M_TEMP_COMP      (0x1 << 7)
    #define LSM9DS1M_XY_ULTRA_HIGH  (0x3 << 5)
    #define LSM9DS1M_80HZ           (0x7 << 2)
    #define LSM9DS1M_FAST_ODR       (0x1 << 1)

#define LSM9DS1M_CTRL_REG2_M        0x21
    #define LSM9DS1M_FS_16G         (0x3 << 5)

#define LSM9DS1M_CTRL_REG3_M        0x22
    #define LSM9DS1M_SPI_ENABLE      (0x01 << 2)
    #define LSM9DS1M_CONTINUOUS_MODE 0x0

#define LSM9DS1M_CTRL_REG4_M        0x23
    #define LSM9DS1M_Z_ULTRA_HIGH  (0x3 << 2)

#define LSM9DS1M_CTRL_REG5_M        0x24
    #define LSM9DS1M_BDU            (0x0 << 6)

#define LSM9DS1M_STATUS_REG_M       0x27

#define LSM9DS1M_OUT_X_L_M          0x28
#define LSM9DS1M_OUT_X_H_M          0x29
#define LSM9DS1M_OUT_Y_L_M          0x2A
#define LSM9DS1M_OUT_Y_H_M          0x2B
#define LSM9DS1M_OUT_Z_L_M          0x2C
#define LSM9DS1M_OUT_Z_H_M          0x2D
#define LSM9DS1M_INT_CFG_M          0x30
#define LSM9DS1M_INT_SRC_M          0x31
#define LSM9DS1M_INT_THS_L_M        0x32
#define LSM9DS1M_INT_THS_H_M        0x33

extern const AP_HAL::HAL &hal;

AP_Compass_LSM9DS1::AP_Compass_LSM9DS1(AP_HAL::OwnPtr<AP_HAL::Device> dev,
                                       enum Rotation rotation)
    : _dev(std::move(dev))
    , _rotation(rotation)
{
}

AP_Compass_Backend *AP_Compass_LSM9DS1::probe(AP_HAL::OwnPtr<AP_HAL::Device> dev,
                                              enum Rotation rotation)
{
    if (!dev) {
        return nullptr;
    }
    AP_Compass_LSM9DS1 *sensor = new AP_Compass_LSM9DS1(std::move(dev), rotation);
    if (!sensor || !sensor->init()) {
        delete sensor;
        return nullptr;
    }

    return sensor;
}

bool AP_Compass_LSM9DS1::init()
{
    AP_HAL::Semaphore *bus_sem = _dev->get_semaphore();

    if (!bus_sem) {
        DEV_PRINTF("LSM9DS1: Unable to get bus semaphore\n");
        return false;
    }
    bus_sem->take_blocking();

    if (!_check_id()) {
        DEV_PRINTF("LSM9DS1: Could not check id\n");
        goto errout;
    }

    if (!_configure()) {
        DEV_PRINTF("LSM9DS1: Could not check id\n");
        goto errout;
    }

    if (!_set_scale()) {
        DEV_PRINTF("LSM9DS1: Could not set scale\n");
        goto errout;
    }

    //register compass instance
    _dev->set_device_type(DEVTYPE_LSM9DS1);
    if (!register_compass(_dev->get_bus_id(), _compass_instance)) {
        goto errout;
    }
    set_dev_id(_compass_instance, _dev->get_bus_id());

    set_rotation(_compass_instance, _rotation);


    _dev->register_periodic_callback(10000, FUNCTOR_BIND_MEMBER(&AP_Compass_LSM9DS1::_update, void));

    bus_sem->give();

    return true;

errout:
    bus_sem->give();
    return false;
}

void AP_Compass_LSM9DS1::_dump_registers()
{
    DEV_PRINTF("LSMDS1 registers\n");
    for (uint8_t reg = LSM9DS1M_OFFSET_X_REG_L_M; reg <= LSM9DS1M_INT_THS_H_M; reg++) {
        DEV_PRINTF("%02x:%02x ", (unsigned)reg, (unsigned)_register_read(reg));
        if ((reg - (LSM9DS1M_OFFSET_X_REG_L_M-1)) % 16 == 0) {
            DEV_PRINTF("\n");
        }
    }
    DEV_PRINTF("\n");
}

void AP_Compass_LSM9DS1::_update(void)
{
    struct sample_regs regs;
    Vector3f raw_field;

    if (!_block_read(LSM9DS1M_STATUS_REG_M, (uint8_t *) &regs, sizeof(regs))) {
        return;
    }

    if (regs.status & 0x80) {
        return;
    }

    raw_field = Vector3f(regs.val[0], regs.val[1], regs.val[2]);

    if (is_zero(raw_field.x) && is_zero(raw_field.y) && is_zero(raw_field.z)) {
        return;
    }

    raw_field *= _scaling;

    accumulate_sample(raw_field, _compass_instance);
}

void AP_Compass_LSM9DS1::read()
{
    drain_accumulated_samples(_compass_instance);
}

bool AP_Compass_LSM9DS1::_check_id(void)
{
    // initially run the bus at low speed
    _dev->set_speed(AP_HAL::Device::SPEED_LOW);

    uint8_t value = _register_read(LSM9DS1M_WHO_AM_I);
    if (value != WHO_AM_I_MAG) {
        DEV_PRINTF("LSM9DS1: unexpected WHOAMI 0x%x\n", (unsigned)value);
        return false;
    }

    _dev->set_speed(AP_HAL::Device::SPEED_HIGH);

    return true;
}

bool AP_Compass_LSM9DS1::_configure(void)
{
    _register_write(LSM9DS1M_CTRL_REG1_M, LSM9DS1M_TEMP_COMP | LSM9DS1M_XY_ULTRA_HIGH | LSM9DS1M_80HZ | LSM9DS1M_FAST_ODR);
    _register_write(LSM9DS1M_CTRL_REG2_M, LSM9DS1M_FS_16G);
    _register_write(LSM9DS1M_CTRL_REG3_M, LSM9DS1M_CONTINUOUS_MODE);
    _register_write(LSM9DS1M_CTRL_REG4_M, LSM9DS1M_Z_ULTRA_HIGH);
    _register_write(LSM9DS1M_CTRL_REG5_M, LSM9DS1M_BDU);

    return true;
}

bool AP_Compass_LSM9DS1::_set_scale(void)
{
    static const uint8_t FS_M_MASK = 0xc;
    _register_modify(LSM9DS1M_CTRL_REG2_M, FS_M_MASK, LSM9DS1M_FS_16G);
    _scaling = 0.58f;

    return true;
}

uint8_t AP_Compass_LSM9DS1::_register_read(uint8_t reg)
{
    uint8_t val = 0;

    /* set READ bit */
    reg |= 0x80;
    _dev->read_registers(reg, &val, 1);

    return val;
}

bool AP_Compass_LSM9DS1::_block_read(uint8_t reg, uint8_t *buf, uint32_t size)
{
    /* set !MS bit */
    reg |= 0xc0;
    return _dev->read_registers(reg, buf, size);
}

void AP_Compass_LSM9DS1::_register_write(uint8_t reg, uint8_t val)
{
    _dev->write_register(reg, val);
}

void AP_Compass_LSM9DS1::_register_modify(uint8_t reg, uint8_t clearbits, uint8_t setbits)
{
    uint8_t val;

    val = _register_read(reg);
    val &= ~clearbits;
    val |= setbits;
    _register_write(reg, val);
}

#endif