.. |
examples
|
AP_Motors: Add missing shebang
|
2023-09-08 17:09:26 +10:00 |
AP_Motors.h
|
AP_Motors: add scripting dynamic mixer, allowing varable geometry vehicles
|
2021-07-20 09:19:28 +10:00 |
AP_Motors6DOF.cpp
|
AP_Motors6DOF: scale pwm output linearly to MOT_PWM_MIN/MAX
|
2023-07-27 10:46:18 -03:00 |
AP_Motors6DOF.h
|
AP_Motors: Support changing update period
|
2022-12-13 17:10:06 +11:00 |
AP_MotorsCoax.cpp
|
AP_Motors: move thrust linerization to its own class
|
2023-04-18 09:32:22 +10:00 |
AP_MotorsCoax.h
|
AP_Motors: tidy includes of SRV_Channel.h
|
2023-01-25 22:30:55 +11:00 |
AP_MotorsHeli.cpp
|
AP_Motors: Heli: move heli parameter check to arming check
|
2023-08-01 09:12:51 +09:00 |
AP_MotorsHeli.h
|
AP_Motors: Heli: move heli parameter check to arming check
|
2023-08-01 09:12:51 +09:00 |
AP_MotorsHeli_Dual.cpp
|
AP_Motors: Heli: remove loop rate "RSC control mode change failed" meassage
|
2023-08-01 09:12:51 +09:00 |
AP_MotorsHeli_Dual.h
|
AP_Motors: Heli: move heli parameter check to arming check
|
2023-08-01 09:12:51 +09:00 |
AP_MotorsHeli_Quad.cpp
|
AP_Motors: Heli: remove loop rate "RSC control mode change failed" meassage
|
2023-08-01 09:12:51 +09:00 |
AP_MotorsHeli_Quad.h
|
AP_Motors: Heli: Remove unused init_output return and don't assume single for initialised OK
|
2023-07-04 11:31:21 +10:00 |
AP_MotorsHeli_RSC.cpp
|
AP_Motors: Heli RSC: remove incorrect set range call
|
2023-06-27 09:04:18 +10:00 |
AP_MotorsHeli_RSC.h
|
AP_MotorsHeli: move rotor_speed_above_critical to RSC so that it is actually used
|
2023-05-08 19:05:17 -04:00 |
AP_MotorsHeli_Single.cpp
|
AP_Motors: correct metadata for H_DDFP_SPIN_MIN param
|
2023-08-07 07:36:47 -04:00 |
AP_MotorsHeli_Single.h
|
AP_Motors: Heli: move heli parameter check to arming check
|
2023-08-01 09:12:51 +09:00 |
AP_MotorsHeli_Swash.cpp
|
AP_Motors: heli: move swash servo defualt and setup into swash lib
|
2023-07-18 08:05:26 +09:00 |
AP_MotorsHeli_Swash.h
|
AP_Motors: Heli: get output mask from swashplate lib
|
2023-07-18 08:05:26 +09:00 |
AP_MotorsMatrix.cpp
|
AP_Motors: If frame specification is FALSE, frame name is unsupported
|
2023-07-11 10:22:26 +09:00 |
AP_MotorsMatrix.h
|
AP_Motors: Matrix: mixer simplification
|
2023-04-04 09:25:15 +10:00 |
AP_MotorsMatrix_6DoF_Scripting.cpp
|
AP_Motors: allow AP_SCRIPTING_ENABLED to come from hwdef files
|
2023-06-09 16:10:52 +10:00 |
AP_MotorsMatrix_6DoF_Scripting.h
|
AP_Motors: Support changing update period
|
2022-12-13 17:10:06 +11:00 |
AP_MotorsMatrix_Scripting_Dynamic.cpp
|
AP_Motors: allow AP_SCRIPTING_ENABLED to come from hwdef files
|
2023-06-09 16:10:52 +10:00 |
AP_MotorsMatrix_Scripting_Dynamic.h
|
AP_Motors: Support changing update period
|
2022-12-13 17:10:06 +11:00 |
AP_MotorsMulticopter.cpp
|
AP_Motors: allow use of raw voltage for battery compensation driven by MOT_OPTIONS
|
2023-04-26 17:04:45 +10:00 |
AP_MotorsMulticopter.h
|
AP_Motors: move thrust linerization to its own class
|
2023-04-18 09:32:22 +10:00 |
AP_MotorsSingle.cpp
|
AP_Motors: move thrust linerization to its own class
|
2023-04-18 09:32:22 +10:00 |
AP_MotorsSingle.h
|
AP_Motors: tidy includes of SRV_Channel.h
|
2023-01-25 22:30:55 +11:00 |
AP_MotorsTailsitter.cpp
|
AP_Motors: move thrust linerization to its own class
|
2023-04-18 09:32:22 +10:00 |
AP_MotorsTailsitter.h
|
AP_Motors: tidy includes of SRV_Channel.h
|
2023-01-25 22:30:55 +11:00 |
AP_MotorsTri.cpp
|
AP_Motors: move thrust linerization to its own class
|
2023-04-18 09:32:22 +10:00 |
AP_MotorsTri.h
|
AP_Motors: Tricopter: rework and move yaw servo to arming check, allow no yaw on plane
|
2023-04-11 09:13:26 +10:00 |
AP_Motors_Class.cpp
|
AP_Motors: Add motor test checks method to refuse test
|
2023-06-27 10:24:15 +10:00 |
AP_Motors_Class.h
|
AP_Motors: Add motor test checks method to refuse test
|
2023-06-27 10:24:15 +10:00 |
AP_Motors_Thrust_Linearization.cpp
|
AP_Motors: make defaults dependent on vehicle type
|
2023-06-14 22:26:40 -04:00 |
AP_Motors_Thrust_Linearization.h
|
AP_Motors: make defaults dependent on vehicle type
|
2023-06-14 22:26:40 -04:00 |