ardupilot/libraries/AP_HAL_ChibiOS/hwdef/KakuteF4Mini/hwdef.dat

53 lines
1.4 KiB
Plaintext

# hw definition file for processing by chibios_pins.py
# for Holybro KakuteF4 v2 Mini hardware.
@ thanks to betaflight for pin information
include ../KakuteF4/hwdef.dat
undef APJ_BOARD_ID
undef PB0 PB1 PA3 PA2 PB11 PB10 PD2 PC8
undef BOARD_PWM_COUNT_DEFAULT
undef SERIAL_ORDER
undef CH_CFG_ST_RESOLUTION
undef STM32_ST_USE_TIMER
undef HAL_SERIAL2_PROTOCOL
APJ_BOARD_ID 1030
# use natural UART order to align with docs
SERIAL_ORDER OTG1 USART1 EMPTY USART3 UART4 UART5 USART6
# RC input defaults to UART to allow for bi-dir dshot
# also frees up 32-bit TIM2 for system timer
PB11 USART3_RX USART3
PB10 USART3_TX USART3
define HAL_SERIAL3_PROTOCOL SerialProtocol_RCIN
define HAL_SERIAL5_PROTOCOL SerialProtocol_ESCTelemetry
define HAL_SERIAL5_BAUD 115
# UART5 (ESC telemetry sensor), SERIAL5, NODMA for bi-dir dshot
PD2 UART5_RX UART5 NODMA
# Motors, bi-directional dshot capable
PB0 TIM3_CH3 TIM3 PWM(1) GPIO(50) BIDIR
PB1 TIM3_CH4 TIM3 PWM(2) GPIO(51)
PA3 TIM5_CH4 TIM5 PWM(3) GPIO(52) BIDIR
PA2 TIM5_CH3 TIM5 PWM(4) GPIO(53)
PC8 TIM8_CH3 TIM8 PWM(5) GPIO(56) # LED strip
DMA_PRIORITY ADC* USART3* TIM3* TIM5* SPI3* SPI1*
DMA_NOSHARE SPI3_RX
define BOARD_PWM_COUNT_DEFAULT 5
define STM32_PWM_USE_ADVANCED TRUE
# save some flash
define HAL_BATTMON_SMBUS_ENABLE 0
define HAL_BATTMON_FUEL_ENABLE 0
define HAL_PARACHUTE_ENABLED 0
define HAL_SPRAYER_ENABLED 0
define HAL_MOUNT_ENABLED 0
define GENERATOR_ENABLED 0
define AC_OAPATHPLANNER_ENABLED 0
define PRECISION_LANDING 0