mirror of https://github.com/ArduPilot/ardupilot
125 lines
4.8 KiB
C++
125 lines
4.8 KiB
C++
/// @file AP_Parachute.h
|
|
/// @brief Parachute release library
|
|
#pragma once
|
|
|
|
#include <AP_Param/AP_Param.h>
|
|
#include <AP_Common/AP_Common.h>
|
|
|
|
#define AP_PARACHUTE_TRIGGER_TYPE_RELAY_0 0
|
|
#define AP_PARACHUTE_TRIGGER_TYPE_RELAY_1 1
|
|
#define AP_PARACHUTE_TRIGGER_TYPE_RELAY_2 2
|
|
#define AP_PARACHUTE_TRIGGER_TYPE_RELAY_3 3
|
|
#define AP_PARACHUTE_TRIGGER_TYPE_SERVO 10
|
|
|
|
#define AP_PARACHUTE_RELEASE_DELAY_MS 500 // delay in milliseconds between call to release() and when servo or relay actually moves. Allows for warning to user
|
|
#define AP_PARACHUTE_RELEASE_DURATION_MS 2000 // when parachute is released, servo or relay stay at their released position/value for 2000ms (2seconds)
|
|
|
|
#define AP_PARACHUTE_SERVO_ON_PWM_DEFAULT 1300 // default PWM value to move servo to when shutter is activated
|
|
#define AP_PARACHUTE_SERVO_OFF_PWM_DEFAULT 1100 // default PWM value to move servo to when shutter is deactivated
|
|
|
|
#define AP_PARACHUTE_ALT_MIN_DEFAULT 10 // default min altitude the vehicle should have before parachute is released
|
|
|
|
#define AP_PARACHUTE_CRITICAL_SINK_DEFAULT 0 // default critical sink speed in m/s to trigger emergency parachute
|
|
|
|
#ifndef HAL_PARACHUTE_ENABLED
|
|
// default to parachute enabled to match previous configs
|
|
#define HAL_PARACHUTE_ENABLED 1
|
|
#endif
|
|
|
|
#if HAL_PARACHUTE_ENABLED
|
|
|
|
/// @class AP_Parachute
|
|
/// @brief Class managing the release of a parachute
|
|
class AP_Parachute {
|
|
|
|
public:
|
|
/// Constructor
|
|
AP_Parachute()
|
|
{
|
|
// setup parameter defaults
|
|
#if CONFIG_HAL_BOARD == HAL_BOARD_SITL
|
|
if (_singleton != nullptr) {
|
|
AP_HAL::panic("Parachute must be singleton");
|
|
}
|
|
#endif
|
|
_singleton = this;
|
|
AP_Param::setup_object_defaults(this, var_info);
|
|
}
|
|
|
|
/* Do not allow copies */
|
|
CLASS_NO_COPY(AP_Parachute);
|
|
|
|
/// enabled - enable or disable parachute release
|
|
void enabled(bool on_off);
|
|
|
|
/// enabled - returns true if parachute release is enabled
|
|
bool enabled() const { return _enabled; }
|
|
|
|
/// release - release parachute
|
|
void release();
|
|
|
|
/// released - true if the parachute has been released (or release is in progress)
|
|
bool released() const { return _released; }
|
|
|
|
/// release_initiated - true if the parachute release sequence has been initiated (may wait before actual release)
|
|
bool release_initiated() const { return _release_initiated; }
|
|
|
|
/// release_in_progress - true if the parachute release sequence is in progress
|
|
bool release_in_progress() const { return _release_in_progress; }
|
|
|
|
/// update - shuts off the trigger should be called at about 10hz
|
|
void update();
|
|
|
|
/// alt_min - returns the min altitude above home the vehicle should have before parachute is released
|
|
/// 0 = altitude check disabled
|
|
int16_t alt_min() const { return _alt_min; }
|
|
|
|
/// set_is_flying - accessor to the is_flying flag
|
|
void set_is_flying(const bool is_flying) { _is_flying = is_flying; }
|
|
|
|
// set_sink_rate - set vehicle sink rate
|
|
void set_sink_rate(float sink_rate);
|
|
|
|
// trigger parachute release if sink_rate is below critical_sink_rate for 1sec
|
|
void check_sink_rate();
|
|
|
|
// check settings are valid
|
|
bool arming_checks(size_t buflen, char *buffer) const;
|
|
|
|
static const struct AP_Param::GroupInfo var_info[];
|
|
|
|
// get singleton instance
|
|
static AP_Parachute *get_singleton() { return _singleton; }
|
|
|
|
private:
|
|
static AP_Parachute *_singleton;
|
|
// Parameters
|
|
AP_Int8 _enabled; // 1 if parachute release is enabled
|
|
AP_Int8 _release_type; // 0:Servo,1:Relay
|
|
AP_Int16 _servo_on_pwm; // PWM value to move servo to when shutter is activated
|
|
AP_Int16 _servo_off_pwm; // PWM value to move servo to when shutter is deactivated
|
|
AP_Int16 _alt_min; // min altitude the vehicle should have before parachute is released
|
|
AP_Int16 _delay_ms; // delay before chute release for motors to stop
|
|
AP_Float _critical_sink; // critical sink rate to trigger emergency parachute
|
|
|
|
// internal variables
|
|
uint32_t _release_time; // system time that parachute is ordered to be released (actual release will happen 0.5 seconds later)
|
|
bool _release_initiated:1; // true if the parachute release initiated (may still be waiting for engine to be suppressed etc.)
|
|
bool _release_in_progress:1; // true if the parachute release is in progress
|
|
bool _released:1; // true if the parachute has been released
|
|
bool _is_flying:1; // true if the vehicle is flying
|
|
uint32_t _sink_time_ms; // system time that the vehicle exceeded critical sink rate
|
|
|
|
enum class Options : uint8_t {
|
|
HoldOpen = (1U<<0),
|
|
};
|
|
|
|
AP_Int32 _options;
|
|
};
|
|
|
|
namespace AP {
|
|
AP_Parachute *parachute();
|
|
};
|
|
|
|
#endif // HAL_PARACHUTE_ENABLED
|