ardupilot/libraries/AP_Compass/Compass.h

/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#ifndef Compass_h
#define Compass_h

#include <inttypes.h>
#include <AP_Common.h>
#include <AP_Param.h>
#include <AP_Math.h>
#include <AP_Declination.h> // ArduPilot Mega Declination Helper Library

// compass product id
#define AP_COMPASS_TYPE_UNKNOWN  0x00
#define AP_COMPASS_TYPE_HIL      0x01
#define AP_COMPASS_TYPE_HMC5843  0x02
#define AP_COMPASS_TYPE_HMC5883L 0x03
#define AP_COMPASS_TYPE_PX4      0x04

// motor compensation types (for use with motor_comp_enabled)
#define AP_COMPASS_MOT_COMP_DISABLED    0x00
#define AP_COMPASS_MOT_COMP_THROTTLE    0x01
#define AP_COMPASS_MOT_COMP_CURRENT     0x02

// setup default mag orientation for each board type
#if CONFIG_HAL_BOARD == HAL_BOARD_APM1
# define MAG_BOARD_ORIENTATION ROTATION_ROLL_180
#elif CONFIG_HAL_BOARD == HAL_BOARD_APM2
# define MAG_BOARD_ORIENTATION ROTATION_NONE
#elif CONFIG_HAL_BOARD == HAL_BOARD_PX4
# define MAG_BOARD_ORIENTATION ROTATION_NONE
#elif CONFIG_HAL_BOARD == HAL_BOARD_AVR_SITL
# define MAG_BOARD_ORIENTATION ROTATION_NONE
#elif CONFIG_HAL_BOARD == HAL_BOARD_SMACCM
# define MAG_BOARD_ORIENTATION ROTATION_PITCH_180
#else
# error "You must define a default compass orientation for this board"
#endif

class Compass
{
public:
    int16_t product_id;                         /// product id
    int16_t mag_x;                      ///< magnetic field strength along the X axis
    int16_t mag_y;                      ///< magnetic field strength along the Y axis
    int16_t mag_z;                      ///< magnetic field strength along the Z axis
    uint32_t last_update;               ///< micros() time of last update
    bool healthy;                               ///< true if last read OK

    /// Constructor
    ///
    Compass();

    /// Initialize the compass device.
    ///
    /// @returns    True if the compass was initialized OK, false if it was not
    ///             found or is not functioning.
    ///
    virtual bool init();

    /// Read the compass and update the mag_ variables.
    ///
    virtual bool read(void) = 0;

    /// use spare CPU cycles to accumulate values from the compass if
    /// possible
    virtual void accumulate(void) = 0;

    /// Calculate the tilt-compensated heading_ variables.
    ///
    /// @param dcm_matrix			The current orientation rotation matrix
    ///
    /// @returns heading in radians
    ///
    float calculate_heading(const Matrix3f &dcm_matrix) const;

    /// Sets the compass offset x/y/z values.
    ///
    /// @param  offsets             Offsets to the raw mag_ values.
    ///
    void set_offsets(const Vector3f &offsets);

    /// Saves the current compass offset x/y/z values.
    ///
    /// This should be invoked periodically to save the offset values maintained by
    /// ::null_offsets.
    ///
    void save_offsets();

    /// Returns the current offset values
    ///
    /// @returns                    The current compass offsets.
    ///
    const Vector3f &get_offsets() const;

    /// Sets the initial location used to get declination
    ///
    /// @param  latitude             GPS Latitude.
    /// @param  longitude            GPS Longitude.
    ///
    void set_initial_location(int32_t latitude, int32_t longitude);

    /// Program new offset values.
    ///
    /// @param  x                   Offset to the raw mag_x value.
    /// @param  y                   Offset to the raw mag_y value.
    /// @param  z                   Offset to the raw mag_z value.
    ///
    void set_offsets(int x, int y, int z) {
        set_offsets(Vector3f(x, y, z));
    }

    /// Perform automatic offset updates
    ///
    void null_offsets(void);

    /// return true if the compass should be used for yaw calculations
    bool use_for_yaw(void) const {
        return healthy && _use_for_yaw;
    }

    /// Sets the local magnetic field declination.
    ///
    /// @param  radians             Local field declination.
    /// @param save_to_eeprom       true to save to eeprom (false saves only to memory)
    ///
    void set_declination(float radians, bool save_to_eeprom = true);
    float get_declination() const;

    // set overall board orientation
    void set_board_orientation(enum Rotation orientation) {
        _board_orientation = orientation;
    }

    /// Set the motor compensation type
    ///
    /// @param  comp_type           0 = disabled, 1 = enabled use throttle, 2 = enabled use current
    ///
    void motor_compensation_type(const uint8_t comp_type) {
        if (_motor_comp_type <= AP_COMPASS_MOT_COMP_CURRENT && _motor_comp_type != (int8_t)comp_type) {
            _motor_comp_type = (int8_t)comp_type;
            _thr_or_curr = 0;                               // set current current or throttle to zero
            set_motor_compensation(Vector3f(0,0,0));        // clear out invalid compensation vector
        }
    }

    /// get the motor compensation value.
    uint8_t motor_compensation_type() const {
        return _motor_comp_type;
    }

    /// Set the motor compensation factor x/y/z values.
    ///
    /// @param  offsets             Offsets multiplied by the throttle value and added to the raw mag_ values.
    ///
    void set_motor_compensation(const Vector3f &motor_comp_factor);

    /// get motor compensation factors as a vector
    const Vector3f& get_motor_compensation() const {
        return _motor_compensation;
    }

    /// Saves the current motor compensation x/y/z values.
    ///
    /// This should be invoked periodically to save the offset values calculated by the motor compensation auto learning
    ///
    void save_motor_compensation();

    /// Returns the current motor compensation offset values
    ///
    /// @returns                    The current compass offsets.
    ///
    const Vector3f &get_motor_offsets() const { return _motor_offset; }

    /// Set the throttle as a percentage from 0.0 to 1.0
    /// @param thr_pct              throttle expressed as a percentage from 0 to 1.0
    void set_throttle(float thr_pct) {
        if(_motor_comp_type == AP_COMPASS_MOT_COMP_THROTTLE) {
            _thr_or_curr = thr_pct;
        }
    }

    /// Set the current used by system in amps
    /// @param amps                 current flowing to the motors expressed in amps
    void set_current(float amps) {
        if(_motor_comp_type == AP_COMPASS_MOT_COMP_CURRENT) {
            _thr_or_curr = amps;
        }
    }

    static const struct AP_Param::GroupInfo var_info[];

    // settable parameters
    AP_Int8 _learn;                             ///<enable calibration learning

protected:
    AP_Int8 _orientation;
    AP_Vector3f _offset;
    AP_Float _declination;
    AP_Int8 _use_for_yaw;                       ///<enable use for yaw calculation
    AP_Int8 _auto_declination;                  ///<enable automatic declination code
    AP_Int8 _external;                          ///<compass is external

    bool _null_init_done;                           ///< first-time-around flag used by offset nulling

    ///< used by offset correction
    static const uint8_t _mag_history_size = 20;
    uint8_t _mag_history_index;
    Vector3i _mag_history[_mag_history_size];

    // motor compensation
    AP_Int8     _motor_comp_type;               // 0 = disabled, 1 = enabled for throttle, 2 = enabled for current
    AP_Vector3f _motor_compensation;            // factors multiplied by throttle and added to compass outputs
    Vector3f    _motor_offset;                  // latest compensation added to compass
    float       _thr_or_curr;                   // throttle expressed as a percentage from 0 ~ 1.0 or current expressed in amps

    // board orientation from AHRS
    enum Rotation _board_orientation;
};
#endif