ardupilot/libraries/AP_BattMonitor/AP_BattMonitor_Backend.cpp

248 lines
10 KiB
C++

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <AP_Common/AP_Common.h>
#include <AP_HAL/AP_HAL.h>
#include "AP_BattMonitor.h"
#include "AP_BattMonitor_Backend.h"
/*
base class constructor.
This incorporates initialisation as well.
*/
AP_BattMonitor_Backend::AP_BattMonitor_Backend(AP_BattMonitor &mon, AP_BattMonitor::BattMonitor_State &mon_state,
AP_BattMonitor_Params &params) :
_mon(mon),
_state(mon_state),
_params(params)
{
}
/// capacity_remaining_pct - returns the % battery capacity remaining (0 ~ 100)
uint8_t AP_BattMonitor_Backend::capacity_remaining_pct() const
{
float mah_remaining = _params._pack_capacity - _state.consumed_mah;
if ( _params._pack_capacity > 10 ) { // a very very small battery
return MIN(MAX((100 * (mah_remaining) / _params._pack_capacity), 0), UINT8_MAX);
} else {
return 0;
}
}
// update battery resistance estimate
// faster rates of change of the current and voltage readings cause faster updates to the resistance estimate
// the battery resistance is calculated by comparing the latest current and voltage readings to a low-pass filtered current and voltage
// high current steps are integrated into the resistance estimate by varying the time constant of the resistance filter
void AP_BattMonitor_Backend::update_resistance_estimate()
{
// return immediately if no current
if (!has_current() || !is_positive(_state.current_amps)) {
return;
}
// update maximum current seen since startup and protect against divide by zero
_current_max_amps = MAX(_current_max_amps, _state.current_amps);
float current_delta = _state.current_amps - _current_filt_amps;
if (is_zero(current_delta)) {
return;
}
// update reference voltage and current
if (_state.voltage > _resistance_voltage_ref) {
_resistance_voltage_ref = _state.voltage;
_resistance_current_ref = _state.current_amps;
}
// calculate time since last update
uint32_t now = AP_HAL::millis();
float loop_interval = (now - _resistance_timer_ms) / 1000.0f;
_resistance_timer_ms = now;
// estimate short-term resistance
float filt_alpha = constrain_float(loop_interval/(loop_interval + AP_BATT_MONITOR_RES_EST_TC_1), 0.0f, 0.5f);
float resistance_alpha = MIN(1, AP_BATT_MONITOR_RES_EST_TC_2*fabsf((_state.current_amps-_current_filt_amps)/_current_max_amps));
float resistance_estimate = -(_state.voltage-_voltage_filt)/current_delta;
if (is_positive(resistance_estimate)) {
_state.resistance = _state.resistance*(1-resistance_alpha) + resistance_estimate*resistance_alpha;
}
// calculate maximum resistance
if ((_resistance_voltage_ref > _state.voltage) && (_state.current_amps > _resistance_current_ref)) {
float resistance_max = (_resistance_voltage_ref - _state.voltage) / (_state.current_amps - _resistance_current_ref);
_state.resistance = MIN(_state.resistance, resistance_max);
}
// update the filtered voltage and currents
_voltage_filt = _voltage_filt*(1-filt_alpha) + _state.voltage*filt_alpha;
_current_filt_amps = _current_filt_amps*(1-filt_alpha) + _state.current_amps*filt_alpha;
// update estimated voltage without sag
_state.voltage_resting_estimate = _state.voltage + _state.current_amps * _state.resistance;
}
float AP_BattMonitor_Backend::voltage_resting_estimate() const
{
// resting voltage should always be greater than or equal to the raw voltage
return MAX(_state.voltage, _state.voltage_resting_estimate);
}
AP_BattMonitor::BatteryFailsafe AP_BattMonitor_Backend::update_failsafes(void)
{
const uint32_t now = AP_HAL::millis();
bool low_voltage, low_capacity, critical_voltage, critical_capacity;
check_failsafe_types(low_voltage, low_capacity, critical_voltage, critical_capacity);
if (critical_voltage) {
// this is the first time our voltage has dropped below minimum so start timer
if (_state.critical_voltage_start_ms == 0) {
_state.critical_voltage_start_ms = now;
} else if (_params._low_voltage_timeout > 0 &&
now - _state.critical_voltage_start_ms > uint32_t(_params._low_voltage_timeout)*1000U) {
return AP_BattMonitor::BatteryFailsafe_Critical;
}
} else {
// acceptable voltage so reset timer
_state.critical_voltage_start_ms = 0;
}
if (critical_capacity) {
return AP_BattMonitor::BatteryFailsafe_Critical;
}
if (low_voltage) {
// this is the first time our voltage has dropped below minimum so start timer
if (_state.low_voltage_start_ms == 0) {
_state.low_voltage_start_ms = now;
} else if (_params._low_voltage_timeout > 0 &&
now - _state.low_voltage_start_ms > uint32_t(_params._low_voltage_timeout)*1000U) {
return AP_BattMonitor::BatteryFailsafe_Low;
}
} else {
// acceptable voltage so reset timer
_state.low_voltage_start_ms = 0;
}
if (low_capacity) {
return AP_BattMonitor::BatteryFailsafe_Low;
}
// if we've gotten this far then battery is ok
return AP_BattMonitor::BatteryFailsafe_None;
}
static bool update_check(size_t buflen, char *buffer, bool failed, const char *message)
{
if (failed) {
strncpy(buffer, message, buflen);
return false;
}
return true;
}
bool AP_BattMonitor_Backend::arming_checks(char * buffer, size_t buflen) const
{
bool low_voltage, low_capacity, critical_voltage, critical_capacity;
check_failsafe_types(low_voltage, low_capacity, critical_voltage, critical_capacity);
bool below_arming_voltage = is_positive(_params._arming_minimum_voltage) &&
(_state.voltage < _params._arming_minimum_voltage);
bool below_arming_capacity = (_params._arming_minimum_capacity > 0) &&
((_params._pack_capacity - _state.consumed_mah) < _params._arming_minimum_capacity);
bool fs_capacity_inversion = is_positive(_params._critical_capacity) &&
is_positive(_params._low_capacity) &&
(_params._low_capacity < _params._critical_capacity);
bool fs_voltage_inversion = is_positive(_params._critical_voltage) &&
is_positive(_params._low_voltage) &&
(_params._low_voltage < _params._critical_voltage);
bool result = update_check(buflen, buffer, low_voltage, "low voltage failsafe");
result = result && update_check(buflen, buffer, low_capacity, "low capacity failsafe");
result = result && update_check(buflen, buffer, critical_voltage, "critical voltage failsafe");
result = result && update_check(buflen, buffer, critical_capacity, "critical capacity failsafe");
result = result && update_check(buflen, buffer, below_arming_voltage, "below minimum arming voltage");
result = result && update_check(buflen, buffer, below_arming_capacity, "below minimum arming capacity");
result = result && update_check(buflen, buffer, fs_capacity_inversion, "capacity failsafe critical > low");
result = result && update_check(buflen, buffer, fs_voltage_inversion, "voltage failsafe critical > low");
return result;
}
void AP_BattMonitor_Backend::check_failsafe_types(bool &low_voltage, bool &low_capacity, bool &critical_voltage, bool &critical_capacity) const
{
// use voltage or sag compensated voltage
float voltage_used;
switch (_params.failsafe_voltage_source()) {
case AP_BattMonitor_Params::BattMonitor_LowVoltageSource_Raw:
default:
voltage_used = _state.voltage;
break;
case AP_BattMonitor_Params::BattMonitor_LowVoltageSource_SagCompensated:
voltage_used = voltage_resting_estimate();
break;
}
// check critical battery levels
if ((voltage_used > 0) && (_params._critical_voltage > 0) && (voltage_used < _params._critical_voltage)) {
critical_voltage = true;
} else {
critical_voltage = false;
}
// check capacity failsafe if current monitoring is enabled
if (has_current() && (_params._critical_capacity > 0) &&
((_params._pack_capacity - _state.consumed_mah) < _params._critical_capacity)) {
critical_capacity = true;
} else {
critical_capacity = false;
}
if ((voltage_used > 0) && (_params._low_voltage > 0) && (voltage_used < _params._low_voltage)) {
low_voltage = true;
} else {
low_voltage = false;
}
// check capacity if current monitoring is enabled
if (has_current() && (_params._low_capacity > 0) &&
((_params._pack_capacity - _state.consumed_mah) < _params._low_capacity)) {
low_capacity = true;
} else {
low_capacity = false;
}
}
/*
default implementation for reset_remaining(). This sets consumed_wh
and consumed_mah based on the given percentage. Use percentage=100
for a full battery
*/
bool AP_BattMonitor_Backend::reset_remaining(float percentage)
{
percentage = constrain_float(percentage, 0, 100);
const float used_proportion = (100 - percentage) * 0.01;
_state.consumed_mah = used_proportion * _params._pack_capacity;
// without knowing the history we can't do consumed_wh
// accurately. Best estimate is based on current voltage. This
// will be good when resetting the battery to a value close to
// full charge
_state.consumed_wh = _state.consumed_mah * 1000 * _state.voltage;
// reset failsafe state for this backend
_state.failsafe = update_failsafes();
return true;
}