ardupilot/ArduCopterMega/GCS_Mavlink.pde

949 lines
24 KiB
Plaintext

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#if GCS_PROTOCOL == GCS_PROTOCOL_MAVLINK || HIL_PROTOCOL == HIL_PROTOCOL_MAVLINK
#include "Mavlink_Common.h"
GCS_MAVLINK::GCS_MAVLINK(AP_Var::Key key) :
packet_drops(0),
// parameters
// note, all values not explicitly initialised here are zeroed
waypoint_send_timeout(1000), // 1 second
waypoint_receive_timeout(1000), // 1 second
// stream rates
_group (key, key == Parameters::k_param_streamrates_port0 ? PSTR("SR0_"): PSTR("SR3_")),
// AP_VAR //ref //index, default, name
streamRateRawSensors (&_group, 0, 0, PSTR("RAW_SENS")),
streamRateExtendedStatus (&_group, 1, 0, PSTR("EXT_STAT")),
streamRateRCChannels (&_group, 2, 0, PSTR("RC_CHAN")),
streamRateRawController (&_group, 3, 0, PSTR("RAW_CTRL")),
streamRatePosition (&_group, 4, 0, PSTR("POSITION")),
streamRateExtra1 (&_group, 5, 0, PSTR("EXTRA1")),
streamRateExtra2 (&_group, 6, 0, PSTR("EXTRA2")),
streamRateExtra3 (&_group, 7, 0, PSTR("EXTRA3"))
{
}
void
GCS_MAVLINK::init(BetterStream * port)
{
GCS_Class::init(port);
if (port == &Serial) { // to split hil vs gcs
mavlink_comm_0_port = port;
chan = MAVLINK_COMM_0;
}else{
mavlink_comm_1_port = port;
chan = MAVLINK_COMM_1;
}
_queued_parameter = NULL;
// temporary
streamRateRawSensors.set_and_save(0);
streamRateExtendedStatus.set_and_save(0);
streamRateRCChannels.set_and_save(0);
streamRateRawController.set_and_save(0);
streamRatePosition.set_and_save(0);
streamRateExtra1.set_and_save(0);
streamRateExtra2.set_and_save(0);
streamRateExtra3.set_and_save(0);
}
void
GCS_MAVLINK::update(void)
{
// receive new packets
mavlink_message_t msg;
mavlink_status_t status;
// process received bytes
while(comm_get_available(chan))
{
uint8_t c = comm_receive_ch(chan);
// Try to get a new message
if(mavlink_parse_char(chan, c, &msg, &status)) handleMessage(&msg);
}
// Update packet drops counter
packet_drops += status.packet_rx_drop_count;
// send out queued params/ waypoints
_queued_send();
// stop waypoint sending if timeout
if (waypoint_sending && (millis() - waypoint_timelast_send) > waypoint_send_timeout){
send_text_P(SEVERITY_LOW,PSTR("waypoint send timeout"));
waypoint_sending = false;
}
// stop waypoint receiving if timeout
if (waypoint_receiving && (millis() - waypoint_timelast_receive) > waypoint_receive_timeout){
send_text_P(SEVERITY_LOW,PSTR("waypoint receive timeout"));
waypoint_receiving = false;
}
}
/*
mav2 1
mav3 3
mav5 3
mav6 10
mav7 10
mav6 10
mav7 10
mav6 10
mav7 10
*/
void
GCS_MAVLINK::data_stream_send(uint16_t freqMin, uint16_t freqMax)
{
if (waypoint_sending == false && waypoint_receiving == false && _queued_parameter == NULL) {
if (freqLoopMatch(streamRateRawSensors, freqMin, freqMax)){
send_message(MSG_RAW_IMU);
//Serial.printf("mav1 %d\n", (int)streamRateRawSensors.get());
}
if (freqLoopMatch(streamRateExtendedStatus, freqMin, freqMax)) {
send_message(MSG_EXTENDED_STATUS);
send_message(MSG_GPS_STATUS);
send_message(MSG_CURRENT_WAYPOINT);
send_message(MSG_GPS_RAW); // TODO - remove this message after location message is working
send_message(MSG_NAV_CONTROLLER_OUTPUT);
//Serial.printf("mav2 %d\n", (int)streamRateExtendedStatus.get());
}
if (freqLoopMatch(streamRatePosition, freqMin, freqMax)) {
// sent with GPS read
//send_message(MSG_LOCATION);
//Serial.printf("mav3 %d\n", (int)streamRatePosition.get());
}
if (freqLoopMatch(streamRateRawController, freqMin, freqMax)) {
// This is used for HIL. Do not change without discussing with HIL maintainers
send_message(MSG_SERVO_OUT);
//Serial.printf("mav4 %d\n", (int)streamRateRawController.get());
}
if (freqLoopMatch(streamRateRCChannels, freqMin, freqMax)) {
send_message(MSG_RADIO_OUT);
send_message(MSG_RADIO_IN);
//Serial.printf("mav5 %d\n", (int)streamRateRCChannels.get());
}
if (freqLoopMatch(streamRateExtra1, freqMin, freqMax)){ // Use Extra 1 for AHRS info
send_message(MSG_ATTITUDE);
//Serial.printf("mav6 %d\n", (int)streamRateExtra1.get());
}
if (freqLoopMatch(streamRateExtra2, freqMin, freqMax)){ // Use Extra 2 for additional HIL info
send_message(MSG_VFR_HUD);
//Serial.printf("mav7 %d\n", (int)streamRateExtra2.get());
}
if (freqLoopMatch(streamRateExtra3, freqMin, freqMax)){
// Available datastream
//Serial.printf("mav8 %d\n", (int)streamRateExtra3.get());
}
}
}
void
GCS_MAVLINK::send_message(uint8_t id, uint32_t param)
{
mavlink_send_message(chan,id,param,packet_drops);
}
void
GCS_MAVLINK::send_text(uint8_t severity, const char *str)
{
mavlink_send_text(chan,severity,str);
}
void
GCS_MAVLINK::send_text(uint8_t severity, const prog_char_t *str)
{
mavlink_statustext_t m;
uint8_t i;
for (i=0; i<sizeof(m.text); i++) {
m.text[i] = pgm_read_byte((const prog_char *)(str++));
}
if (i < sizeof(m.text)) m.text[i] = 0;
mavlink_send_text(chan, severity, (const char *)m.text);
}
void
GCS_MAVLINK::acknowledge(uint8_t id, uint8_t sum1, uint8_t sum2)
{
mavlink_acknowledge(chan,id,sum1,sum2);
}
void GCS_MAVLINK::handleMessage(mavlink_message_t* msg)
{
struct Location tell_command; // command for telemetry
switch (msg->msgid) {
case MAVLINK_MSG_ID_REQUEST_DATA_STREAM:
{
// decode
mavlink_request_data_stream_t packet;
mavlink_msg_request_data_stream_decode(msg, &packet);
if (mavlink_check_target(packet.target_system,packet.target_component))
break;
int freq = 0; // packet frequency
if (packet.start_stop == 0)
freq = 0; // stop sending
else if (packet.start_stop == 1)
freq = packet.req_message_rate; // start sending
else
break;
switch(packet.req_stream_id){
case MAV_DATA_STREAM_ALL:
streamRateRawSensors = freq;
streamRateExtendedStatus = freq;
streamRateRCChannels = freq;
streamRateRawController = freq;
streamRatePosition = freq;
streamRateExtra1 = freq;
streamRateExtra2 = freq;
//streamRateExtra3.set_and_save(freq); // We just do set and save on the last as it takes care of the whole group.
streamRateExtra3 = freq; // Don't save!!
break;
case MAV_DATA_STREAM_RAW_SENSORS:
streamRateRawSensors = freq; // We do not set and save this one so that if HIL is shut down incorrectly
// we will not continue to broadcast raw sensor data at 50Hz.
break;
case MAV_DATA_STREAM_EXTENDED_STATUS:
//streamRateExtendedStatus.set_and_save(freq);
streamRateExtendedStatus = freq;
break;
case MAV_DATA_STREAM_RC_CHANNELS:
streamRateRCChannels = freq;
break;
case MAV_DATA_STREAM_RAW_CONTROLLER:
streamRateRawController = freq;
break;
//case MAV_DATA_STREAM_RAW_SENSOR_FUSION:
// streamRateRawSensorFusion.set_and_save(freq);
// break;
case MAV_DATA_STREAM_POSITION:
streamRatePosition = freq;
break;
case MAV_DATA_STREAM_EXTRA1:
streamRateExtra1 = freq;
break;
case MAV_DATA_STREAM_EXTRA2:
streamRateExtra2 = freq;
//streamRateExtra2.set_and_save(freq);
break;
case MAV_DATA_STREAM_EXTRA3:
streamRateExtra3 = freq;
break;
default:
break;
}
break;
}
case MAVLINK_MSG_ID_ACTION:
{
// decode
mavlink_action_t packet;
mavlink_msg_action_decode(msg, &packet);
if (mavlink_check_target(packet.target,packet.target_component)) break;
uint8_t result = 0;
// do action
send_text_P(SEVERITY_LOW,PSTR("action received: "));
//Serial.println(packet.action);
switch(packet.action){
case MAV_ACTION_LAUNCH:
//set_mode(TAKEOFF);
break;
case MAV_ACTION_RETURN:
set_mode(RTL);
result=1;
break;
case MAV_ACTION_EMCY_LAND:
//set_mode(LAND);
break;
case MAV_ACTION_HALT:
do_loiter_at_location();
result=1;
break;
/* No mappable implementation in APM 2.0
case MAV_ACTION_MOTORS_START:
case MAV_ACTION_CONFIRM_KILL:
case MAV_ACTION_EMCY_KILL:
case MAV_ACTION_MOTORS_STOP:
case MAV_ACTION_SHUTDOWN:
break;
*/
case MAV_ACTION_CONTINUE:
process_next_command();
result=1;
break;
case MAV_ACTION_SET_MANUAL:
set_mode(STABILIZE);
result=1;
break;
case MAV_ACTION_SET_AUTO:
set_mode(AUTO);
result=1;
break;
case MAV_ACTION_STORAGE_READ:
AP_Var::load_all();
result=1;
break;
case MAV_ACTION_STORAGE_WRITE:
AP_Var::save_all();
result=1;
break;
case MAV_ACTION_CALIBRATE_RC: break;
trim_radio();
result=1;
break;
case MAV_ACTION_CALIBRATE_GYRO:
case MAV_ACTION_CALIBRATE_MAG:
case MAV_ACTION_CALIBRATE_ACC:
case MAV_ACTION_CALIBRATE_PRESSURE:
case MAV_ACTION_REBOOT: // this is a rough interpretation
//startup_IMU_ground();
//result=1;
break;
/* For future implemtation
case MAV_ACTION_REC_START: break;
case MAV_ACTION_REC_PAUSE: break;
case MAV_ACTION_REC_STOP: break;
*/
/* Takeoff is not an implemented flight mode in APM 2.0
case MAV_ACTION_TAKEOFF:
set_mode(TAKEOFF);
break;
*/
case MAV_ACTION_NAVIGATE:
set_mode(AUTO);
result=1;
break;
/* Land is not an implemented flight mode in APM 2.0
case MAV_ACTION_LAND:
set_mode(LAND);
break;
*/
case MAV_ACTION_LOITER:
set_mode(LOITER);
result=1;
break;
default: break;
}
mavlink_msg_action_ack_send(
chan,
packet.action,
result
);
break;
}
case MAVLINK_MSG_ID_WAYPOINT_REQUEST_LIST:
{
//send_text_P(SEVERITY_LOW,PSTR("waypoint request list"));
// decode
mavlink_waypoint_request_list_t packet;
mavlink_msg_waypoint_request_list_decode(msg, &packet);
if (mavlink_check_target(packet.target_system,packet.target_component))
break;
// Start sending waypoints
mavlink_msg_waypoint_count_send(
chan,msg->sysid,
msg->compid,
g.waypoint_total + 1); // + home
waypoint_timelast_send = millis();
waypoint_sending = true;
waypoint_receiving = false;
waypoint_dest_sysid = msg->sysid;
waypoint_dest_compid = msg->compid;
requested_interface = chan;
break;
}
// XXX read a WP from EEPROM and send it to the GCS
case MAVLINK_MSG_ID_WAYPOINT_REQUEST:
{
//send_text_P(SEVERITY_LOW,PSTR("waypoint request"));
// Check if sending waypiont
if (!waypoint_sending)
break;
// decode
mavlink_waypoint_request_t packet;
mavlink_msg_waypoint_request_decode(msg, &packet);
if (mavlink_check_target(packet.target_system,packet.target_component))
break;
// send waypoint
tell_command = get_command_with_index(packet.seq);
// set frame of waypoint
uint8_t frame;
if (tell_command.options & WP_OPTION_ALT_RELATIVE) {
frame = MAV_FRAME_GLOBAL_RELATIVE_ALT; // reference frame
} else {
frame = MAV_FRAME_GLOBAL; // reference frame
}
float param1 = 0, param2 = 0 , param3 = 0, param4 = 0;
// time that the mav should loiter in milliseconds
uint8_t current = 0; // 1 (true), 0 (false)
if (packet.seq == g.waypoint_index)
current = 1;
uint8_t autocontinue = 1; // 1 (true), 0 (false)
float x = 0, y = 0, z = 0;
if (tell_command.id < MAV_CMD_NAV_LAST) {
// command needs scaling
x = tell_command.lat/1.0e7; // local (x), global (latitude)
y = tell_command.lng/1.0e7; // local (y), global (longitude)
// ACM is processing alt inside each command. so we save and load raw values. - this is diffrent to APM
z = tell_command.alt/1.0e2; // local (z), global/relative (altitude)
}
switch (tell_command.id) { // Switch to map APM command fields inot MAVLink command fields
case MAV_CMD_NAV_LOITER_TURNS:
case MAV_CMD_CONDITION_CHANGE_ALT:
case MAV_CMD_DO_SET_HOME:
param1 = tell_command.p1;
break;
case MAV_CMD_NAV_TAKEOFF:
param1 = 0;
break;
case MAV_CMD_NAV_LOITER_TIME:
param1 = tell_command.p1; // APM loiter time is in ten second increments
break;
case MAV_CMD_CONDITION_DELAY:
case MAV_CMD_CONDITION_DISTANCE:
param1 = tell_command.lat;
break;
case MAV_CMD_DO_JUMP:
param2 = tell_command.lat;
param1 = tell_command.p1;
break;
case MAV_CMD_DO_REPEAT_SERVO:
param4 = tell_command.lng;
case MAV_CMD_DO_REPEAT_RELAY:
case MAV_CMD_DO_CHANGE_SPEED:
param3 = tell_command.lat;
param2 = tell_command.alt;
param1 = tell_command.p1;
break;
case MAV_CMD_NAV_WAYPOINT:
param1 = tell_command.p1;
break;
case MAV_CMD_DO_SET_PARAMETER:
case MAV_CMD_DO_SET_RELAY:
case MAV_CMD_DO_SET_SERVO:
param2 = tell_command.alt;
param1 = tell_command.p1;
break;
}
mavlink_msg_waypoint_send(chan,msg->sysid,
msg->compid,
packet.seq,
frame,
tell_command.id,
current,
autocontinue,
param1,
param2,
param3,
param4,
x,
y,
z);
// update last waypoint comm stamp
waypoint_timelast_send = millis();
break;
}
case MAVLINK_MSG_ID_WAYPOINT_ACK:
{
//send_text_P(SEVERITY_LOW,PSTR("waypoint ack"));
// decode
mavlink_waypoint_ack_t packet;
mavlink_msg_waypoint_ack_decode(msg, &packet);
if (mavlink_check_target(packet.target_system,packet.target_component)) break;
// check for error
uint8_t type = packet.type; // ok (0), error(1)
// turn off waypoint send
waypoint_sending = false;
break;
}
case MAVLINK_MSG_ID_PARAM_REQUEST_LIST:
{
//send_text_P(SEVERITY_LOW,PSTR("param request list"));
// decode
mavlink_param_request_list_t packet;
mavlink_msg_param_request_list_decode(msg, &packet);
if (mavlink_check_target(packet.target_system,packet.target_component)) break;
// Start sending parameters - next call to ::update will kick the first one out
_queued_parameter = AP_Var::first();
_queued_parameter_index = 0;
_queued_parameter_count = _count_parameters();
requested_interface = chan;
break;
}
case MAVLINK_MSG_ID_WAYPOINT_CLEAR_ALL:
{
//send_text_P(SEVERITY_LOW,PSTR("waypoint clear all"));
// decode
mavlink_waypoint_clear_all_t packet;
mavlink_msg_waypoint_clear_all_decode(msg, &packet);
if (mavlink_check_target(packet.target_system, packet.target_component)) break;
// clear all waypoints
uint8_t type = 0; // ok (0), error(1)
g.waypoint_total.set_and_save(0);
// send acknowledgement 3 times to makes sure it is received
for (int i=0;i<3;i++)
mavlink_msg_waypoint_ack_send(chan, msg->sysid, msg->compid, type);
break;
}
case MAVLINK_MSG_ID_WAYPOINT_SET_CURRENT:
{
//send_text_P(SEVERITY_LOW,PSTR("waypoint set current"));
// decode
mavlink_waypoint_set_current_t packet;
mavlink_msg_waypoint_set_current_decode(msg, &packet);
if (mavlink_check_target(packet.target_system,packet.target_component)) break;
// set current command
change_command(packet.seq);
mavlink_msg_waypoint_current_send(chan, g.waypoint_index);
break;
}
case MAVLINK_MSG_ID_WAYPOINT_COUNT:
{
//send_text_P(SEVERITY_LOW,PSTR("waypoint count"));
// decode
mavlink_waypoint_count_t packet;
mavlink_msg_waypoint_count_decode(msg, &packet);
if (mavlink_check_target(packet.target_system,packet.target_component)) break;
// start waypoint receiving
if (packet.count > MAX_WAYPOINTS) {
packet.count = MAX_WAYPOINTS;
}
g.waypoint_total.set_and_save(packet.count - 1);
waypoint_timelast_receive = millis();
waypoint_receiving = true;
waypoint_sending = false;
waypoint_request_i = 0;
break;
}
// XXX receive a WP from GCS and store in EEPROM
case MAVLINK_MSG_ID_WAYPOINT:
{
// Check if receiving waypiont
if (!waypoint_receiving) break;
// decode
mavlink_waypoint_t packet;
mavlink_msg_waypoint_decode(msg, &packet);
if (mavlink_check_target(packet.target_system,packet.target_component)) break;
// check if this is the requested waypoint
if (packet.seq != waypoint_request_i) break;
// store waypoint
uint8_t loadAction = 0; // 0 insert in list, 1 exec now
// defaults
tell_command.id = packet.command;
/*
switch (packet.frame){
case MAV_FRAME_MISSION:
case MAV_FRAME_GLOBAL:
{
tell_command.lat = 1.0e7*packet.x; // in as DD converted to * t7
tell_command.lng = 1.0e7*packet.y; // in as DD converted to * t7
tell_command.alt = packet.z*1.0e2; // in as m converted to cm
tell_command.options = 0;
break;
}
case MAV_FRAME_LOCAL: // local (relative to home position)
{
tell_command.lat = 1.0e7*ToDeg(packet.x/
(radius_of_earth*cos(ToRad(home.lat/1.0e7)))) + home.lat;
tell_command.lng = 1.0e7*ToDeg(packet.y/radius_of_earth) + home.lng;
tell_command.alt = packet.z*1.0e2;
tell_command.options = 1;
break;
}
//case MAV_FRAME_GLOBAL_RELATIVE_ALT: // absolute lat/lng, relative altitude
default:
{
tell_command.lat = 1.0e7 * packet.x; // in as DD converted to * t7
tell_command.lng = 1.0e7 * packet.y; // in as DD converted to * t7
tell_command.alt = packet.z * 1.0e2;
tell_command.options = 1; // store altitude relative!! Always!!
break;
}
}
*/
// we only are supporting Abs position, relative Alt
tell_command.lat = 1.0e7 * packet.x; // in as DD converted to * t7
tell_command.lng = 1.0e7 * packet.y; // in as DD converted to * t7
tell_command.alt = packet.z * 1.0e2;
tell_command.options = 1; // store altitude relative!! Always!!
switch (tell_command.id) { // Switch to map APM command fields inot MAVLink command fields
case MAV_CMD_NAV_LOITER_TURNS:
case MAV_CMD_DO_SET_HOME:
case MAV_CMD_DO_SET_ROI:
tell_command.p1 = packet.param1;
break;
case MAV_CMD_NAV_TAKEOFF:
tell_command.p1 = 0;
break;
case MAV_CMD_CONDITION_CHANGE_ALT:
tell_command.p1 = packet.param1 * 100;
break;
case MAV_CMD_NAV_LOITER_TIME:
tell_command.p1 = packet.param1; // APM loiter time is in ten second increments
break;
case MAV_CMD_CONDITION_DELAY:
case MAV_CMD_CONDITION_DISTANCE:
tell_command.lat = packet.param1;
break;
case MAV_CMD_DO_JUMP:
tell_command.lat = packet.param2;
tell_command.p1 = packet.param1;
break;
case MAV_CMD_DO_REPEAT_SERVO:
tell_command.lng = packet.param4;
case MAV_CMD_DO_REPEAT_RELAY:
case MAV_CMD_DO_CHANGE_SPEED:
tell_command.lat = packet.param3;
tell_command.alt = packet.param2;
tell_command.p1 = packet.param1;
break;
case MAV_CMD_NAV_WAYPOINT:
tell_command.p1 = packet.param1;
break;
case MAV_CMD_DO_SET_PARAMETER:
case MAV_CMD_DO_SET_RELAY:
case MAV_CMD_DO_SET_SERVO:
tell_command.alt = packet.param2;
tell_command.p1 = packet.param1;
break;
}
set_command_with_index(tell_command, packet.seq);
// update waypoint receiving state machine
waypoint_timelast_receive = millis();
waypoint_request_i++;
if (waypoint_request_i > g.waypoint_total){
uint8_t type = 0; // ok (0), error(1)
mavlink_msg_waypoint_ack_send(
chan,
msg->sysid,
msg->compid,
type);
send_text_P(SEVERITY_LOW,PSTR("flight plan received"));
waypoint_receiving = false;
// XXX ignores waypoint radius for individual waypoints, can
// only set WP_RADIUS parameter
}
break;
}
case MAVLINK_MSG_ID_PARAM_SET:
{
AP_Var *vp;
AP_Meta_class::Type_id var_type;
// decode
mavlink_param_set_t packet;
mavlink_msg_param_set_decode(msg, &packet);
if (mavlink_check_target(packet.target_system,packet.target_component))
break;
// set parameter
char key[ONBOARD_PARAM_NAME_LENGTH+1];
strncpy(key, (char *)packet.param_id, ONBOARD_PARAM_NAME_LENGTH);
key[ONBOARD_PARAM_NAME_LENGTH] = 0;
// find the requested parameter
vp = AP_Var::find(key);
if ((NULL != vp) && // exists
!isnan(packet.param_value) && // not nan
!isinf(packet.param_value)) { // not inf
// add a small amount before casting parameter values
// from float to integer to avoid truncating to the
// next lower integer value.
const float rounding_addition = 0.01;
// fetch the variable type ID
var_type = vp->meta_type_id();
// handle variables with standard type IDs
if (var_type == AP_Var::k_typeid_float) {
((AP_Float *)vp)->set_and_save(packet.param_value);
} else if (var_type == AP_Var::k_typeid_float16) {
((AP_Float16 *)vp)->set_and_save(packet.param_value);
} else if (var_type == AP_Var::k_typeid_int32) {
((AP_Int32 *)vp)->set_and_save(packet.param_value + rounding_addition);
} else if (var_type == AP_Var::k_typeid_int16) {
((AP_Int16 *)vp)->set_and_save(packet.param_value + rounding_addition);
} else if (var_type == AP_Var::k_typeid_int8) {
((AP_Int8 *)vp)->set_and_save(packet.param_value + rounding_addition);
} else {
// we don't support mavlink set on this parameter
break;
}
// Report back the new value if we accepted the change
// we send the value we actually set, which could be
// different from the value sent, in case someone sent
// a fractional value to an integer type
mavlink_msg_param_value_send(
chan,
(int8_t *)key,
vp->cast_to_float(),
_count_parameters(),
-1); // XXX we don't actually know what its index is...
}
break;
} // end case
#if ALLOW_RC_OVERRIDE == ENABLED
case MAVLINK_MSG_ID_RC_CHANNELS_RAW:
{
// allow override of RC channel values for HIL
// or for complete GCS control of switch position
// and RC PWM values.
mavlink_rc_channels_raw_t packet;
int16_t v[8];
mavlink_msg_rc_channels_raw_decode(msg, &packet);
v[0] = packet.chan1_raw;
v[1] = packet.chan2_raw;
v[2] = packet.chan3_raw;
v[3] = packet.chan4_raw;
v[4] = packet.chan5_raw;
v[5] = packet.chan6_raw;
v[6] = packet.chan7_raw;
v[7] = packet.chan8_raw;
APM_RC.setHIL(v);
break;
}
#endif
} // end switch
} // end handle mavlink
uint16_t
GCS_MAVLINK::_count_parameters()
{
// if we haven't cached the parameter count yet...
if (0 == _parameter_count) {
AP_Var *vp;
vp = AP_Var::first();
do {
// if a parameter responds to cast_to_float then we are going to be able to report it
if (!isnan(vp->cast_to_float())) {
_parameter_count++;
}
} while (NULL != (vp = vp->next()));
}
return _parameter_count;
}
AP_Var *
GCS_MAVLINK::_find_parameter(uint16_t index)
{
AP_Var *vp;
vp = AP_Var::first();
while (NULL != vp) {
// if the parameter is reportable
if (!(isnan(vp->cast_to_float()))) {
// if we have counted down to the index we want
if (0 == index) {
// return the parameter
return vp;
}
// count off this parameter, as it is reportable but not
// the one we want
index--;
}
// and move to the next parameter
vp = vp->next();
}
return NULL;
}
/**
* @brief Send low-priority messages at a maximum rate of xx Hertz
*
* This function sends messages at a lower rate to not exceed the wireless
* bandwidth. It sends one message each time it is called until the buffer is empty.
* Call this function with xx Hertz to increase/decrease the bandwidth.
*/
void
GCS_MAVLINK::_queued_send()
{
// Check to see if we are sending parameters
if (NULL != _queued_parameter && (requested_interface == chan) && mavdelay > 1) {
AP_Var *vp;
float value;
// copy the current parameter and prepare to move to the next
vp = _queued_parameter;
_queued_parameter = _queued_parameter->next();
// if the parameter can be cast to float, report it here and break out of the loop
value = vp->cast_to_float();
if (!isnan(value)) {
char param_name[ONBOARD_PARAM_NAME_LENGTH]; /// XXX HACK
vp->copy_name(param_name, sizeof(param_name));
mavlink_msg_param_value_send(
chan,
(int8_t*)param_name,
value,
_queued_parameter_count,
_queued_parameter_index);
_queued_parameter_index++;
}
mavdelay = 0;
}
// this is called at 50hz, count runs to prevent flooding serialport and delayed to allow eeprom write
mavdelay++;
// request waypoints one by one
// XXX note that this is pan-interface
if (waypoint_receiving &&
(requested_interface == chan) &&
waypoint_request_i <= g.waypoint_total &&
mavdelay > 15) { // limits to 3.33 hz
mavlink_msg_waypoint_request_send(
chan,
waypoint_dest_sysid,
waypoint_dest_compid,
waypoint_request_i);
mavdelay = 0;
}
}
#endif