mirror of
https://github.com/ArduPilot/ardupilot
synced 2025-01-08 08:58:29 -04:00
8f17f95cbc
updated motor setup test to be sequencial pulses of the motors in CW order. Fixed Mission scripting logic fixed Free yaw error in neutral throttle fixed D term issue with Baro hold - was too high incremented firmware revision, removed frame var removed setup show from startup removed unused EEPROM functions fixed broken demo mission fixed non working loiter with delay git-svn-id: https://arducopter.googlecode.com/svn/trunk@2275 f9c3cf11-9bcb-44bc-f272-b75c42450872
115 lines
2.5 KiB
Plaintext
115 lines
2.5 KiB
Plaintext
/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
|
|
|
|
#define INPUT_BUF_LEN 40
|
|
char input_buffer[INPUT_BUF_LEN];
|
|
|
|
void readCommands(void)
|
|
{
|
|
static byte header[2];
|
|
const byte read_GS_header[] = {0x21, 0x21}; //!! Used to verify the payload msg header
|
|
|
|
if(Serial.available()){
|
|
//Serial.println("Serial.available");
|
|
byte bufferPointer;
|
|
|
|
header[0] = Serial.read();
|
|
header[1] = Serial.read();
|
|
|
|
if((header[0] == read_GS_header[0]) && (header[1] == read_GS_header[1])){
|
|
|
|
// Block until we read full command
|
|
// --------------------------------
|
|
delay(20);
|
|
byte incoming_val = 0;
|
|
|
|
// Ground Station communication
|
|
// ----------------------------
|
|
while(Serial.available() > 0)
|
|
{
|
|
incoming_val = Serial.read();
|
|
|
|
if (incoming_val != 13 && incoming_val != 10 ) {
|
|
input_buffer[bufferPointer++] = incoming_val;
|
|
}
|
|
|
|
if(bufferPointer >= INPUT_BUF_LEN){
|
|
Serial.println("Big buffer overrun");
|
|
bufferPointer = 0;
|
|
input_buffer[0] = 1;
|
|
Serial.flush();
|
|
memset(input_buffer,0,sizeof(input_buffer));
|
|
return;
|
|
}
|
|
}
|
|
parseCommand(input_buffer);
|
|
|
|
// clear buffer of old data
|
|
// ------------------------
|
|
memset(input_buffer,0,sizeof(input_buffer));
|
|
|
|
}else{
|
|
Serial.flush();
|
|
}
|
|
}
|
|
}
|
|
|
|
// Commands can be sent as !!a:100|b:200|c:1
|
|
// -----------------------------------------
|
|
void parseCommand(char *buffer)
|
|
{
|
|
Serial.println("got cmd ");
|
|
Serial.println(buffer);
|
|
char *token, *saveptr1, *saveptr2;
|
|
|
|
for (int j = 1;; j++, buffer = NULL) {
|
|
token = strtok_r(buffer, "|", &saveptr1);
|
|
if (token == NULL) break;
|
|
|
|
char * cmd = strtok_r(token, ":", &saveptr2);
|
|
long value = strtol(strtok_r (NULL,":", &saveptr2), NULL,0);
|
|
|
|
///*
|
|
Serial.print("cmd ");
|
|
Serial.print(cmd[0]);
|
|
Serial.print("\tval ");
|
|
Serial.println(value);
|
|
Serial.println("");
|
|
//*/
|
|
///*
|
|
switch(cmd[0]){
|
|
case 'P':
|
|
g.pid_stabilize_roll.kP((float)value / 1000);
|
|
g.pid_stabilize_pitch.kP((float)value / 1000);
|
|
g.pid_stabilize_pitch.save_gains();
|
|
break;
|
|
|
|
case 'I':
|
|
g.pid_stabilize_roll.kI((float)value / 1000);
|
|
g.pid_stabilize_pitch.kI((float)value / 1000);
|
|
g.pid_stabilize_pitch.save_gains();
|
|
break;
|
|
|
|
case 'D':
|
|
//g.pid_stabilize_roll.kD((float)value / 1000);
|
|
//g.pid_stabilize_pitch.kD((float)value / 1000);
|
|
break;
|
|
|
|
case 'X':
|
|
g.pid_stabilize_roll.imax(value * 100);
|
|
g.pid_stabilize_pitch.imax(value * 100);
|
|
g.pid_stabilize_pitch.save_gains();
|
|
break;
|
|
|
|
case 'R':
|
|
g.stabilize_dampener.set_and_save((float)value / 1000);
|
|
break;
|
|
}
|
|
//*/
|
|
}
|
|
}
|
|
|
|
|
|
|
|
|
|
|