mirror of https://github.com/ArduPilot/ardupilot
250 lines
6.9 KiB
C++
250 lines
6.9 KiB
C++
/*
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include <utility>
|
|
#include <stdio.h>
|
|
|
|
#include "AP_Baro_LPS2XH.h"
|
|
|
|
#include <AP_InertialSensor/AP_InertialSensor_Invensense_registers.h>
|
|
|
|
extern const AP_HAL::HAL &hal;
|
|
|
|
// WHOAMI values
|
|
#define LPS22HB_WHOAMI 0xB1
|
|
#define LPS25HB_WHOAMI 0xBD
|
|
|
|
#define REG_ID 0x0F
|
|
|
|
#define LPS22H_ID 0xB1
|
|
#define LPS22H_CTRL_REG1 0x10
|
|
#define LPS22H_CTRL_REG2 0x11
|
|
#define LPS22H_CTRL_REG3 0x12
|
|
|
|
#define LPS22H_CTRL_REG1_SIM (1 << 0)
|
|
#define LPS22H_CTRL_REG1_BDU (1 << 1)
|
|
#define LPS22H_CTRL_REG1_LPFP_CFG (1 << 2)
|
|
#define LPS22H_CTRL_REG1_EN_LPFP (1 << 3)
|
|
#define LPS22H_CTRL_REG1_PD (0 << 4)
|
|
#define LPS22H_CTRL_REG1_ODR_1HZ (1 << 4)
|
|
#define LPS22H_CTRL_REG1_ODR_10HZ (2 << 4)
|
|
#define LPS22H_CTRL_REG1_ODR_25HZ (3 << 4)
|
|
#define LPS22H_CTRL_REG1_ODR_50HZ (4 << 4)
|
|
#define LPS22H_CTRL_REG1_ODR_75HZ (5 << 4)
|
|
|
|
|
|
#define LPS25H_CTRL_REG1_ADDR 0x20
|
|
#define LPS25H_CTRL_REG2_ADDR 0x21
|
|
#define LPS25H_CTRL_REG3_ADDR 0x22
|
|
#define LPS25H_CTRL_REG4_ADDR 0x23
|
|
#define LPS25H_FIFO_CTRL 0x2E
|
|
#define TEMP_OUT_ADDR 0x2B
|
|
#define PRESS_OUT_XL_ADDR 0x28
|
|
//putting 1 in the MSB of those two registers turns on Auto increment for faster reading.
|
|
|
|
AP_Baro_LPS2XH::AP_Baro_LPS2XH(AP_Baro &baro, AP_HAL::OwnPtr<AP_HAL::Device> dev)
|
|
: AP_Baro_Backend(baro)
|
|
, _dev(std::move(dev))
|
|
{
|
|
}
|
|
|
|
AP_Baro_Backend *AP_Baro_LPS2XH::probe(AP_Baro &baro,
|
|
AP_HAL::OwnPtr<AP_HAL::Device> dev)
|
|
{
|
|
if (!dev) {
|
|
return nullptr;
|
|
}
|
|
AP_Baro_LPS2XH *sensor = new AP_Baro_LPS2XH(baro, std::move(dev));
|
|
if (!sensor || !sensor->_init()) {
|
|
delete sensor;
|
|
return nullptr;
|
|
}
|
|
return sensor;
|
|
}
|
|
|
|
AP_Baro_Backend *AP_Baro_LPS2XH::probe_InvensenseIMU(AP_Baro &baro,
|
|
AP_HAL::OwnPtr<AP_HAL::Device> dev,
|
|
uint8_t imu_address)
|
|
{
|
|
if (!dev) {
|
|
return nullptr;
|
|
}
|
|
AP_Baro_LPS2XH *sensor = new AP_Baro_LPS2XH(baro, std::move(dev));
|
|
if (sensor) {
|
|
if (!sensor->_imu_i2c_init(imu_address)) {
|
|
delete sensor;
|
|
return nullptr;
|
|
}
|
|
}
|
|
if (!sensor || !sensor->_init()) {
|
|
delete sensor;
|
|
return nullptr;
|
|
}
|
|
return sensor;
|
|
}
|
|
|
|
/*
|
|
setup invensense IMU to enable barometer, assuming both IMU and baro
|
|
on the same i2c bus
|
|
*/
|
|
bool AP_Baro_LPS2XH::_imu_i2c_init(uint8_t imu_address)
|
|
{
|
|
if (!_dev->get_semaphore()->take(HAL_SEMAPHORE_BLOCK_FOREVER)) {
|
|
return false;
|
|
}
|
|
// as the baro device is already locked we need to re-use it,
|
|
// changing its address to match the IMU address
|
|
uint8_t old_address = _dev->get_bus_address();
|
|
_dev->set_address(imu_address);
|
|
|
|
_dev->set_retries(4);
|
|
|
|
uint8_t whoami=0;
|
|
_dev->read_registers(MPUREG_WHOAMI, &whoami, 1);
|
|
hal.console->printf("IMU: whoami 0x%02x old_address=%02x\n", whoami, old_address);
|
|
|
|
_dev->write_register(MPUREG_FIFO_EN, 0x00);
|
|
_dev->write_register(MPUREG_PWR_MGMT_1, BIT_PWR_MGMT_1_CLK_XGYRO);
|
|
|
|
// wait for sensor to settle
|
|
hal.scheduler->delay(10);
|
|
|
|
_dev->write_register(MPUREG_INT_PIN_CFG, BIT_BYPASS_EN);
|
|
|
|
_dev->set_address(old_address);
|
|
|
|
_dev->get_semaphore()->give();
|
|
|
|
return true;
|
|
}
|
|
|
|
bool AP_Baro_LPS2XH::_init()
|
|
{
|
|
if (!_dev || !_dev->get_semaphore()->take(HAL_SEMAPHORE_BLOCK_FOREVER)) {
|
|
return false;
|
|
}
|
|
_has_sample = false;
|
|
|
|
_dev->set_speed(AP_HAL::Device::SPEED_HIGH);
|
|
|
|
// top bit is for read on SPI
|
|
_dev->set_read_flag(0x80);
|
|
|
|
if(!_check_whoami()){
|
|
_dev->get_semaphore()->give();
|
|
return false;
|
|
}
|
|
|
|
//init control registers.
|
|
if(_lps2xh_type == BARO_LPS25H){
|
|
_dev->write_register(LPS25H_CTRL_REG1_ADDR,0x00); // turn off for config
|
|
_dev->write_register(LPS25H_CTRL_REG2_ADDR,0x00); //FIFO Disabled
|
|
_dev->write_register(LPS25H_FIFO_CTRL, 0x01);
|
|
_dev->write_register(LPS25H_CTRL_REG1_ADDR,0xc0);
|
|
|
|
// request 25Hz update (maximum refresh Rate according to datasheet)
|
|
CallTime = 40 * AP_USEC_PER_MSEC;
|
|
}
|
|
if(_lps2xh_type == BARO_LPS22H){
|
|
_dev->write_register(LPS22H_CTRL_REG1,LPS22H_CTRL_REG1_ODR_75HZ|LPS22H_CTRL_REG1_BDU|LPS22H_CTRL_REG1_EN_LPFP|LPS22H_CTRL_REG1_LPFP_CFG);
|
|
_dev->write_register(LPS22H_CTRL_REG2,0x18);
|
|
|
|
// request 75Hz update
|
|
CallTime = 1000000/75;
|
|
}
|
|
|
|
_instance = _frontend.register_sensor();
|
|
|
|
_dev->get_semaphore()->give();
|
|
|
|
_dev->register_periodic_callback(CallTime, FUNCTOR_BIND_MEMBER(&AP_Baro_LPS2XH::_timer, void));
|
|
|
|
return true;
|
|
}
|
|
|
|
//check ID
|
|
bool AP_Baro_LPS2XH::_check_whoami(void)
|
|
{
|
|
uint8_t whoami;
|
|
if (! _dev->read_registers(REG_ID, &whoami, 1)) {
|
|
return false;
|
|
}
|
|
hal.console->printf("LPS2XH whoami 0x%02x\n", whoami);
|
|
|
|
switch(whoami){
|
|
case LPS22HB_WHOAMI:
|
|
_lps2xh_type = BARO_LPS22H;
|
|
return true;
|
|
case LPS25HB_WHOAMI:
|
|
_lps2xh_type = BARO_LPS25H;
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
|
|
// acumulate a new sensor reading
|
|
void AP_Baro_LPS2XH::_timer(void)
|
|
{
|
|
_update_temperature();
|
|
_update_pressure();
|
|
_has_sample = true;
|
|
}
|
|
|
|
// transfer data to the frontend
|
|
void AP_Baro_LPS2XH::update(void)
|
|
{
|
|
if (_sem.take_nonblocking()) {
|
|
if (!_has_sample) {
|
|
_sem.give();
|
|
return;
|
|
}
|
|
|
|
_copy_to_frontend(_instance, _pressure, _temperature);
|
|
_has_sample = false;
|
|
_sem.give();
|
|
}
|
|
}
|
|
|
|
// calculate temperature
|
|
void AP_Baro_LPS2XH::_update_temperature(void)
|
|
{
|
|
uint8_t pu8[2];
|
|
_dev->read_registers(TEMP_OUT_ADDR, pu8, 2);
|
|
int16_t Temp_Reg_s16 = (uint16_t)(pu8[1]<<8) | pu8[0];
|
|
|
|
if (_sem.take_nonblocking()) {
|
|
if(_lps2xh_type == BARO_LPS25H){
|
|
_temperature=((float)(Temp_Reg_s16/480)+42.5);
|
|
}
|
|
if(_lps2xh_type == BARO_LPS22H){
|
|
_temperature=(float)(Temp_Reg_s16/100);
|
|
}
|
|
_sem.give();
|
|
}
|
|
}
|
|
|
|
// calculate pressure
|
|
void AP_Baro_LPS2XH::_update_pressure(void)
|
|
{
|
|
uint8_t pressure[3];
|
|
_dev->read_registers(PRESS_OUT_XL_ADDR, pressure, 3);
|
|
int32_t Pressure_Reg_s32 = ((uint32_t)pressure[2]<<16)|((uint32_t)pressure[1]<<8)|(uint32_t)pressure[0];
|
|
int32_t Pressure_mb = Pressure_Reg_s32 * (100.0 / 4096); // scale for pa
|
|
if (_sem.take_nonblocking()) {
|
|
_pressure=Pressure_mb;
|
|
_sem.give();
|
|
}
|
|
}
|