mirror of https://github.com/ArduPilot/ardupilot
131 lines
5.1 KiB
C++
131 lines
5.1 KiB
C++
#include <AP_BoardConfig/AP_BoardConfig.h>
|
|
#include "OpticalFlow.h"
|
|
#include "AP_OpticalFlow_Onboard.h"
|
|
#include "AP_OpticalFlow_SITL.h"
|
|
#include "AP_OpticalFlow_Pixart.h"
|
|
#include "AP_OpticalFlow_PX4Flow.h"
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
|
|
const AP_Param::GroupInfo OpticalFlow::var_info[] = {
|
|
// @Param: _ENABLE
|
|
// @DisplayName: Optical flow enable/disable
|
|
// @Description: Setting this to Enabled(1) will enable optical flow. Setting this to Disabled(0) will disable optical flow
|
|
// @Values: 0:Disabled, 1:Enabled
|
|
// @User: Standard
|
|
AP_GROUPINFO("_ENABLE", 0, OpticalFlow, _enabled, 0),
|
|
|
|
// @Param: _FXSCALER
|
|
// @DisplayName: X axis optical flow scale factor correction
|
|
// @Description: This sets the parts per thousand scale factor correction applied to the flow sensor X axis optical rate. It can be used to correct for variations in effective focal length. Each positive increment of 1 increases the scale factor applied to the X axis optical flow reading by 0.1%. Negative values reduce the scale factor.
|
|
// @Range: -200 +200
|
|
// @Increment: 1
|
|
// @User: Standard
|
|
AP_GROUPINFO("_FXSCALER", 1, OpticalFlow, _flowScalerX, 0),
|
|
|
|
// @Param: _FYSCALER
|
|
// @DisplayName: Y axis optical flow scale factor correction
|
|
// @Description: This sets the parts per thousand scale factor correction applied to the flow sensor Y axis optical rate. It can be used to correct for variations in effective focal length. Each positive increment of 1 increases the scale factor applied to the Y axis optical flow reading by 0.1%. Negative values reduce the scale factor.
|
|
// @Range: -200 +200
|
|
// @Increment: 1
|
|
// @User: Standard
|
|
AP_GROUPINFO("_FYSCALER", 2, OpticalFlow, _flowScalerY, 0),
|
|
|
|
// @Param: _ORIENT_YAW
|
|
// @DisplayName: Flow sensor yaw alignment
|
|
// @Description: Specifies the number of centi-degrees that the flow sensor is yawed relative to the vehicle. A sensor with its X-axis pointing to the right of the vehicle X axis has a positive yaw angle.
|
|
// @Range: -18000 +18000
|
|
// @Increment: 1
|
|
// @User: Standard
|
|
AP_GROUPINFO("_ORIENT_YAW", 3, OpticalFlow, _yawAngle_cd, 0),
|
|
|
|
// @Param: _POS_X
|
|
// @DisplayName: X position offset
|
|
// @Description: X position of the optical flow sensor focal point in body frame. Positive X is forward of the origin.
|
|
// @Units: m
|
|
// @User: Advanced
|
|
|
|
// @Param: _POS_Y
|
|
// @DisplayName: Y position offset
|
|
// @Description: Y position of the optical flow sensor focal point in body frame. Positive Y is to the right of the origin.
|
|
// @Units: m
|
|
// @User: Advanced
|
|
|
|
// @Param: _POS_Z
|
|
// @DisplayName: Z position offset
|
|
// @Description: Z position of the optical flow sensor focal point in body frame. Positive Z is down from the origin.
|
|
// @Units: m
|
|
// @User: Advanced
|
|
AP_GROUPINFO("_POS", 4, OpticalFlow, _pos_offset, 0.0f),
|
|
|
|
// @Param: _ADDR
|
|
// @DisplayName: Address on the bus
|
|
// @Description: This is used to select between multiple possible I2C addresses for some sensor types. For PX4Flow you can choose 0 to 7 for the 8 possible addresses on the I2C bus.
|
|
// @Range: 0 127
|
|
// @User: Advanced
|
|
AP_GROUPINFO("_ADDR", 5, OpticalFlow, _address, 0),
|
|
|
|
AP_GROUPEND
|
|
};
|
|
|
|
// default constructor
|
|
OpticalFlow::OpticalFlow(AP_AHRS_NavEKF &ahrs)
|
|
: _ahrs(ahrs),
|
|
_last_update_ms(0)
|
|
{
|
|
AP_Param::setup_object_defaults(this, var_info);
|
|
|
|
memset(&_state, 0, sizeof(_state));
|
|
|
|
// healthy flag will be overwritten on update
|
|
_flags.healthy = false;
|
|
}
|
|
|
|
void OpticalFlow::init(void)
|
|
{
|
|
// return immediately if not enabled
|
|
if (!_enabled) {
|
|
return;
|
|
}
|
|
|
|
if (!backend) {
|
|
#if AP_FEATURE_BOARD_DETECT
|
|
if (AP_BoardConfig::get_board_type() == AP_BoardConfig::PX4_BOARD_PIXHAWK ||
|
|
AP_BoardConfig::get_board_type() == AP_BoardConfig::PX4_BOARD_PIXHAWK2 ||
|
|
AP_BoardConfig::get_board_type() == AP_BoardConfig::PX4_BOARD_PCNC1) {
|
|
// possibly have pixhart on external SPI
|
|
backend = AP_OpticalFlow_Pixart::detect("pixartflow", *this);
|
|
}
|
|
if (AP_BoardConfig::get_board_type() == AP_BoardConfig::PX4_BOARD_SP01) {
|
|
backend = AP_OpticalFlow_Pixart::detect("pixartPC15", *this);
|
|
}
|
|
if (backend == nullptr) {
|
|
backend = AP_OpticalFlow_PX4Flow::detect(*this);
|
|
}
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_SITL
|
|
backend = new AP_OpticalFlow_SITL(*this);
|
|
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP ||\
|
|
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
|
|
backend = new AP_OpticalFlow_Onboard(*this);
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX
|
|
backend = AP_OpticalFlow_PX4Flow::detect(*this);
|
|
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_CHIBIOS_SKYVIPER_F412
|
|
backend = AP_OpticalFlow_Pixart::detect("pixartflow", *this);
|
|
#endif
|
|
}
|
|
|
|
if (backend != nullptr) {
|
|
backend->init();
|
|
}
|
|
}
|
|
|
|
void OpticalFlow::update(void)
|
|
{
|
|
if (backend != nullptr) {
|
|
backend->update();
|
|
}
|
|
// only healthy if the data is less than 0.5s old
|
|
_flags.healthy = (AP_HAL::millis() - _last_update_ms < 500);
|
|
}
|
|
|