mirror of https://github.com/ArduPilot/ardupilot
82 lines
2.9 KiB
C++
82 lines
2.9 KiB
C++
#pragma once
|
|
|
|
#include "AP_Baro_Backend.h"
|
|
|
|
#if AP_BARO_ICP201XX_ENABLED
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include <AP_HAL/Semaphores.h>
|
|
#include <AP_HAL/Device.h>
|
|
|
|
class AP_Baro_ICP201XX : public AP_Baro_Backend
|
|
{
|
|
public:
|
|
void update() override;
|
|
|
|
static AP_Baro_Backend *probe(AP_Baro &baro, AP_HAL::OwnPtr<AP_HAL::I2CDevice> dev);
|
|
|
|
private:
|
|
AP_Baro_ICP201XX(AP_Baro &baro, AP_HAL::OwnPtr<AP_HAL::I2CDevice> dev);
|
|
|
|
bool init();
|
|
void dummy_reg();
|
|
bool read_reg(uint8_t reg, uint8_t *buf, uint8_t len);
|
|
bool read_reg(uint8_t reg, uint8_t *val);
|
|
bool write_reg(uint8_t reg, uint8_t val);
|
|
bool mode_select(uint8_t mode);
|
|
bool read_otp_data(uint8_t addr, uint8_t cmd, uint8_t *val);
|
|
bool get_sensor_data(float *pressure, float *temperature);
|
|
void soft_reset();
|
|
bool boot_sequence();
|
|
bool configure();
|
|
void wait_read();
|
|
bool flush_fifo();
|
|
void timer();
|
|
|
|
uint8_t instance;
|
|
|
|
AP_HAL::OwnPtr<AP_HAL::I2CDevice> dev;
|
|
|
|
// accumulation structure, protected by _sem
|
|
struct {
|
|
float tsum;
|
|
float psum;
|
|
uint32_t count;
|
|
} accum;
|
|
|
|
// time last read command was sent
|
|
uint32_t last_measure_us;
|
|
|
|
enum class OP_MODE : uint8_t {
|
|
OP_MODE0 = 0, /* Mode 0: Bw:6.25 Hz ODR: 25Hz */
|
|
OP_MODE1, /* Mode 1: Bw:30 Hz ODR: 120Hz */
|
|
OP_MODE2, /* Mode 2: Bw:10 Hz ODR: 40Hz */
|
|
OP_MODE3, /* Mode 3: Bw:0.5 Hz ODR: 2Hz */
|
|
OP_MODE4, /* Mode 4: User configurable Mode */
|
|
} _op_mode{OP_MODE::OP_MODE2};
|
|
|
|
enum class FIFO_READOUT_MODE : uint8_t {
|
|
FIFO_READOUT_MODE_PRES_TEMP = 0, /* Pressure and temperature as pair and address wraps to the start address of the Pressure value ( pressure first ) */
|
|
FIFO_READOUT_MODE_TEMP_ONLY = 1, /* Temperature only reporting */
|
|
FIFO_READOUT_MODE_TEMP_PRES = 2, /* Pressure and temperature as pair and address wraps to the start address of the Temperature value ( Temperature first ) */
|
|
FIFO_READOUT_MODE_PRES_ONLY = 3 /* Pressure only reporting */
|
|
} _fifo_readout_mode{FIFO_READOUT_MODE::FIFO_READOUT_MODE_PRES_TEMP};
|
|
|
|
enum class POWER_MODE : uint8_t {
|
|
POWER_MODE_NORMAL = 0, /* Normal Mode: Device is in standby and goes to active mode during the execution of a measurement */
|
|
POWER_MODE_ACTIVE = 1 /* Active Mode: Power on DVDD and enable the high frequency clock */
|
|
} _power_mode{POWER_MODE::POWER_MODE_NORMAL};
|
|
|
|
enum MEAS_MODE : uint8_t {
|
|
MEAS_MODE_FORCED_TRIGGER = 0, /* Force trigger mode based on icp201xx_forced_meas_trigger_t **/
|
|
MEAS_MODE_CONTINUOUS = 1 /* Continuous measurements based on selected mode ODR settings*/
|
|
} _meas_mode{MEAS_MODE::MEAS_MODE_CONTINUOUS};
|
|
|
|
enum FORCED_MEAS_TRIGGER : uint8_t {
|
|
FORCE_MEAS_STANDBY = 0, /* Stay in Stand by */
|
|
FORCE_MEAS_TRIGGER_FORCE_MEAS = 1 /* Trigger for forced measurements */
|
|
} _forced_meas_trigger{FORCED_MEAS_TRIGGER::FORCE_MEAS_STANDBY};
|
|
};
|
|
|
|
#endif // AP_BARO_ICP201XX_ENABLED
|