.. |
AC_AttitudeControl
|
Sub: remove angle_boost logic
|
2022-09-15 11:07:59 -03:00 |
AC_AutoTune
|
AC_AutoTune: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_Autorotation
|
AC_Autorotation: add and use AP_RPM_ENABLED
|
2022-09-20 09:28:27 +10:00 |
AC_Avoidance
|
AC_Avoidance: correct compilation for header changes
|
2022-09-27 09:26:45 +10:00 |
AC_CustomControl
|
AC_CustomControl: add README
|
2022-08-30 13:10:09 +10:00 |
AC_Fence
|
AC_Fence: include required GCS.h header
|
2022-09-27 09:26:45 +10:00 |
AC_InputManager
|
AC_InputManager: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_PID
|
AC_PID: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_PrecLand
|
AC_PrecLand: include required GCS.h header
|
2022-09-27 09:26:45 +10:00 |
AC_Sprayer
|
…
|
|
AC_WPNav
|
AC_WPNav: AC_Loiter: Fix loiter level bug
|
2022-09-02 09:02:46 +09:00 |
APM_Control
|
APM_Control: fixed yaw PID reset
|
2022-09-22 05:55:15 +10:00 |
AP_ADC
|
AP_ADC: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_ADSB
|
AP_ADSB: correct metadata in libraries failing checks on emitter
|
2022-08-16 11:50:11 +10:00 |
AP_AHRS
|
AP_AHRS: Add accessor function for airspeed health monitoring
|
2022-09-26 14:17:53 +10:00 |
AP_AIS
|
AP_AIS: include GCS_MAVLink.h
|
2022-07-13 18:32:35 +10:00 |
AP_AccelCal
|
AP_AccelCal: include GCS_Config.h rather than GCS.h
|
2022-09-27 09:26:45 +10:00 |
AP_AdvancedFailsafe
|
AP_AdvancedFailsafe: add note to desc's on how to determine GPIO pin numbers
|
2022-04-24 08:21:01 +09:00 |
AP_Airspeed
|
AP_Airspeed: allow EKF checking without wind max
|
2022-09-26 14:17:53 +10:00 |
AP_Arming
|
AP_Arming: correct compilation with rally disabled
|
2022-09-27 10:16:47 +10:00 |
AP_Avoidance
|
AP_Avoidance: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_BLHeli
|
AP_BLHeli: allow motor mask and motor output type to be passed in for AP_Periph
|
2022-09-20 09:45:03 +10:00 |
AP_Baro
|
fix: baro same driver multi-definition
|
2022-09-01 08:39:43 +10:00 |
AP_BattMonitor
|
AP_BattMonitor: fix Rotoye Temperature Monitoring
|
2022-09-20 09:43:25 +10:00 |
AP_Beacon
|
AP_Beacon: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_BoardConfig
|
AP_BoardConfig: load CUAVv6X defaults when detected
|
2022-09-14 18:04:46 +10:00 |
AP_Button
|
AP_Button: pre-arm displays gpio vs servo_ch conflict
|
2022-04-26 15:19:28 +09:00 |
AP_CANManager
|
AP_CANManager: added scripting2 protocol
|
2022-07-03 08:21:55 +10:00 |
AP_Camera
|
AP_Camera: correct compilation for header changes
|
2022-09-27 09:26:45 +10:00 |
AP_CheckFirmware
|
AP_CheckFirmware: rename secure data to apsec_data
|
2022-09-05 12:35:37 +10:00 |
AP_Common
|
AP_Common: added BIT_IS_SET_64()
|
2022-09-06 10:49:50 +10:00 |
AP_Compass
|
AP_Compass: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_CustomRotations
|
AP_CustomRotations: fix param refrencing
|
2022-04-20 18:25:57 +10:00 |
AP_DAL
|
AP_DAL: added set source events for EKF3
|
2022-05-31 09:17:37 +10:00 |
AP_Declination
|
AP_Declination: avoid undefined floating point exceptions on macOS when using implicit casts
|
2022-08-24 17:34:17 +10:00 |
AP_Devo_Telem
|
AP_Devo_Telem: rename AP_AHRS::get_position to get_location
|
2022-01-25 10:47:22 +11:00 |
AP_EFI
|
AP_EFI: correct compilation for header changes
|
2022-09-27 09:26:45 +10:00 |
AP_ESC_Telem
|
AP_ESC_Telem: make sure active mask takes into account rpm updates
|
2022-09-20 09:45:03 +10:00 |
AP_ExternalAHRS
|
AP_ExternalAHRS: fixes from --ubsan autotest
|
2022-09-06 10:49:50 +10:00 |
AP_FETtecOneWire
|
AP_FETTecOneWire: Fix the recent change of NUM_SERVO_CHANNELS > 24
|
2022-06-22 11:51:23 +10:00 |
AP_Filesystem
|
AP_Filesystem: correct compilation with rally disabled
|
2022-09-27 10:16:47 +10:00 |
AP_FlashIface
|
AP_FlashIface: fix examples
|
2022-08-19 18:33:58 +10:00 |
AP_FlashStorage
|
…
|
|
AP_Follow
|
AP_Follow: include required GCS.h header
|
2022-09-27 09:26:45 +10:00 |
AP_Frsky_Telem
|
AP_Frsky_Telem: add and use AP_RPM_ENABLED
|
2022-09-20 09:28:27 +10:00 |
AP_GPS
|
AP_GPS: removed the old DroneCAN Fix message
|
2022-09-28 17:27:32 +10:00 |
AP_Generator
|
AP_Generator: add AP_GENERATOR_RICHENPOWER_ENABLED
|
2022-07-19 09:09:05 +10:00 |
AP_Gripper
|
AP_Gripper: apply auto close to all backends.
|
2022-08-09 13:23:35 +10:00 |
AP_GyroFFT
|
AP_GyroFFT: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_HAL
|
AP_HAL: increase short board names to 23 chars
|
2022-09-21 17:56:42 +10:00 |
AP_HAL_ChibiOS
|
hwdef: reduced memory usage on MatekF405-CAN board
|
2022-09-28 07:16:39 +10:00 |
AP_HAL_ESP32
|
AP_HAL_ESP32: increase short board names to 23 chars
|
2022-09-21 17:56:42 +10:00 |
AP_HAL_Empty
|
AP_HAL_Empty: move implementations of functions to header
|
2022-06-23 12:38:41 +10:00 |
AP_HAL_Linux
|
AP_HAL_Linux: Use Linux-specific TCSETS2 ioctl to enable "non-standard" UART baudrates
|
2022-09-26 22:12:21 -03:00 |
AP_HAL_SITL
|
AP_HAL_SITL: increase short board names to 23 chars
|
2022-09-21 17:56:42 +10:00 |
AP_Hott_Telem
|
AP_Hott_Telem: add and use AP_RPM_ENABLED
|
2022-09-20 09:28:27 +10:00 |
AP_ICEngine
|
AP_ICEngine: add and use AP_ICENGINE_ENABLE
|
2022-07-22 08:48:16 +10:00 |
AP_IOMCU
|
AP_IOMCU: log number of errors reading status page
|
2022-09-02 11:16:52 +10:00 |
AP_IRLock
|
AP_IRLock: correct spelling mili -> milli
|
2022-01-31 08:55:29 +09:00 |
AP_InertialNav
|
AP_InertialNav: nfc, fix to say relative to EKF origin
|
2022-02-03 12:05:12 +09:00 |
AP_InertialSensor
|
AP_InertialSensor: make sure dynamic notches always get updates so that slew limiting is not too aggressive
|
2022-09-21 17:41:38 +10:00 |
AP_InternalError
|
…
|
|
AP_JSButton
|
…
|
|
AP_KDECAN
|
AP_KDECAN: more changes for 32 bit servo mask
|
2022-05-22 12:07:37 +10:00 |
AP_L1_Control
|
AP_L1_Control: use AP_GROUPINFO instead of AP_GROUPINFO_FRAME
|
2022-05-10 09:35:11 +10:00 |
AP_LTM_Telem
|
AP_LTM_Telem: add AP_LTM_TELEM_ENABLED
|
2022-06-28 20:19:41 +10:00 |
AP_Landing
|
AP_Landing: change logging to be designated as streaming
|
2022-08-05 10:16:18 +10:00 |
AP_LandingGear
|
AP_LandingGear: SITL: only set defualts is SITL pin is set avoiding enable via param conversion
|
2022-08-02 10:48:19 +10:00 |
AP_LeakDetector
|
…
|
|
AP_Logger
|
AP_Logger: fixed missing doc field
|
2022-09-26 14:17:53 +10:00 |
AP_MSP
|
AP_MSP: move arming status to MSP telemetry base class
|
2022-09-21 17:18:53 +10:00 |
AP_Math
|
AP_Math: quaternion::to_euler scaling clarified with comment
|
2022-09-28 17:09:31 +10:00 |
AP_Menu
|
…
|
|
AP_Mission
|
AP_Mission: initialize jump-tracking in init()
|
2022-09-27 10:02:04 +10:00 |
AP_Module
|
AP_Module: correct ModuleTest example for lack of GCS object
|
2022-08-19 18:34:19 +10:00 |
AP_Motors
|
AP_Motors: Multicopter: add motor pwm param range check
|
2022-09-19 20:57:51 -04:00 |
AP_Mount
|
AP_Mount: add get_attitude_euler
|
2022-09-28 17:09:31 +10:00 |
AP_NMEA_Output
|
AP_NMEA_Output: use a fixed maximum number of NMEA outputs
|
2022-02-23 12:36:59 +11:00 |
AP_NavEKF
|
AP_NavEKF: added a getter function for active source set
|
2022-08-18 02:05:27 -04:00 |
AP_NavEKF2
|
AP_NavEKF2: stop using GCS_MAVLINK.h in header files
|
2022-08-16 09:45:51 +10:00 |
AP_NavEKF3
|
AP_NavEKF3: Allow wind states to recover faster when airspeed sensor failed
|
2022-09-26 14:17:53 +10:00 |
AP_Navigation
|
…
|
|
AP_Notify
|
AP_Notify: move defaulting of HAL_DSHOT_ALARM into hwdef
|
2022-09-15 09:18:04 +10:00 |
AP_OLC
|
AP_OLC: tidy includes
|
2022-05-03 09:14:58 +10:00 |
AP_ONVIF
|
AP_ONVIF: fix executable permission and trailing whitespace
|
2022-06-08 08:16:42 +09:00 |
AP_OSD
|
AP_OSD: update font files to remove blank space artifacts
|
2022-09-27 09:23:59 +10:00 |
AP_OpenDroneID
|
AP_OpenDroneID: fixed cpp check for cygwin
|
2022-08-24 18:08:40 +10:00 |
AP_OpticalFlow
|
AP_OpticalFlow: allow use of OpticalFlow on SimOnHardWare
|
2022-08-24 18:27:32 +10:00 |
AP_Parachute
|
AP_Parachute: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Param
|
AP_Param: make load_defaults_file() available on ChibiOS
|
2022-09-14 18:04:46 +10:00 |
AP_PiccoloCAN
|
AP_PiccoloCAN: fix for new param set
|
2022-09-20 15:24:48 +10:00 |
AP_Proximity
|
AP_Proximity: change PROXIMITY_GND_DETECT_THRESHOLD to param
|
2022-09-14 19:40:35 +10:00 |
AP_RAMTRON
|
AP_RAMTRON: reduce scope for WITH_SEMAPHORE
|
2022-07-17 21:42:33 +10:00 |
AP_RCMapper
|
AP_RCMapper: Increase parameter metadata range to match NUM_RC_CHANNELS
|
2022-06-21 09:57:44 +10:00 |
AP_RCProtocol
|
AP_RCProtocol: fix examples
|
2022-08-19 18:33:58 +10:00 |
AP_RCTelemetry
|
AP_RCTelemetry: add and use AP_RPM_ENABLED
|
2022-09-20 09:28:27 +10:00 |
AP_ROMFS
|
AP_ROMFS: tidy includes
|
2022-05-03 09:14:58 +10:00 |
AP_RPM
|
AP_RPM: correct SITL backend compilation if RPM disabled in SITL
|
2022-09-28 20:10:21 +10:00 |
AP_RSSI
|
AP_RSSI: convert floating point divides into multiplys
|
2022-03-18 15:26:44 +11:00 |
AP_RTC
|
AP_RTC: fix oldest_acceptable_date to be in micros
|
2022-02-10 09:22:30 +11:00 |
AP_Radio
|
AP_Radio: increase short board names to 23 chars
|
2022-09-21 17:56:42 +10:00 |
AP_Rally
|
AP_Rally: tidy creation of Location from RallyLocation
|
2022-07-14 11:49:53 +10:00 |
AP_RangeFinder
|
AP_Rangefinder: fixed out of range issue with benewake uart lidars
|
2022-09-06 12:34:41 +10:00 |
AP_Relay
|
AP_Relay:Prevent operation for sim-on-hardware,add logs
|
2022-05-02 10:54:02 +10:00 |
AP_RobotisServo
|
AP_RobotisServo: disable with minmimize features and 1mb flash
|
2022-06-15 18:05:44 +10:00 |
AP_SBusOut
|
…
|
|
AP_Scheduler
|
AP_Scheduler: fix examples
|
2022-08-19 18:33:58 +10:00 |
AP_Scripting
|
AP_Scripting: add mount-poi example
|
2022-09-28 17:09:31 +10:00 |
AP_SerialLED
|
AP_SerialLED: enable 32 servo outs
|
2022-05-22 12:07:37 +10:00 |
AP_SerialManager
|
AP_SerialManager: generalize EFI serial protocol name
|
2022-08-28 08:12:48 +10:00 |
AP_ServoRelayEvents
|
…
|
|
AP_SmartRTL
|
AP_SmartRTL: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Soaring
|
AP_Soaring: make function const
|
2022-07-20 17:28:39 +10:00 |
AP_Stats
|
…
|
|
AP_TECS
|
AP_TECS: Assume flight at cruise speed if speed measurement not available
|
2022-09-26 14:17:53 +10:00 |
AP_TempCalibration
|
…
|
|
AP_TemperatureSensor
|
…
|
|
AP_Terrain
|
AP_Terrain: correct compilation with rally disabled
|
2022-09-27 10:16:47 +10:00 |
AP_Torqeedo
|
AP_Torqeedo : correct comment spelling
|
2022-05-24 20:27:45 +09:00 |
AP_Tuning
|
AP_Tuning: tidy includes
|
2022-05-03 09:14:58 +10:00 |
AP_UAVCAN
|
AP_UAVCAN: removed the old DroneCAN Fix message
|
2022-09-28 17:27:32 +10:00 |
AP_Vehicle
|
AP_Vehicle: add 0x to internal error statustext
|
2022-09-28 19:46:08 +10:00 |
AP_VideoTX
|
AP_VideoTX: ensure that Tramp changes are broadcast to the GCS
|
2022-09-22 10:48:04 +10:00 |
AP_VisualOdom
|
AP_VisualOdom: only include log structure if enabled
|
2022-07-13 18:14:12 +10:00 |
AP_Volz_Protocol
|
AP_Volz: disable with minmimize features
|
2022-06-15 18:05:44 +10:00 |
AP_WheelEncoder
|
AP_WheelEncoder: fix WheelEncoder_Quadrature timestamp.
|
2022-06-07 09:59:27 +10:00 |
AP_Winch
|
AP_Winch: stop libraries including AP_Logger.h in .h files
|
2022-04-08 19:18:38 +10:00 |
AP_WindVane
|
AP_Windvane: correct compilation for header changes
|
2022-09-27 09:26:45 +10:00 |
AR_Motors
|
AR_Motors: remove arming check to allow ackerman and skid-steering
|
2022-08-22 07:46:50 -04:00 |
AR_WPNav
|
AR_WPNav: add accessors for accel and jerk limits
|
2022-09-06 11:23:51 +09:00 |
Filter
|
Filter: optimize notch filter frequency updates when the requested frequency has not changed
|
2022-09-22 11:48:28 +10:00 |
GCS_MAVLink
|
GCS_MAVLink: correct compilation with rally disabled
|
2022-09-27 10:16:47 +10:00 |
PID
|
PID: params always use set method
|
2022-08-03 13:43:48 +01:00 |
RC_Channel
|
RC_Channel: save some bytes by excluding functions
|
2022-09-22 11:24:25 +10:00 |
SITL
|
SITL: Fixed rounding lat/lng issue when running JSBSim SITL
|
2022-09-21 17:58:40 +10:00 |
SRV_Channel
|
SRV_Channel: adjust trim, check all channels for range limit
|
2022-09-20 11:20:16 +10:00 |
StorageManager
|
StorageManager: fix write_block() comment
|
2021-12-17 09:53:47 +09:00 |
doc
|
…
|
|