ardupilot/libraries/AP_Logger
Patrick José Pereira 258083a6f2 AP_Logger: AP_Logger_File: Set custom log directory in init
`_log_directory` was used before `ensure_log_directory_exists`,
to fetch the log path

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-10-20 09:31:49 +11:00
..
examples AP_Logger: make block logger conform to mavlink expectations of numbering 2020-09-05 10:20:39 +10:00
AP_Logger.cpp AP_Logger: keep pointer to link rather than using its ->chan 2020-09-25 09:01:00 +10:00
AP_Logger.h AP_Logger: VISP and VISV get ignored field 2020-10-06 09:18:04 +09:00
AP_Logger_Backend.cpp AP_Logger: stop logs safely in the block logger and asynchronously where possible 2020-09-17 10:45:57 +10:00
AP_Logger_Backend.h AP_Logger: keep pointer to link rather than using its ->chan 2020-09-25 09:01:00 +10:00
AP_Logger_Block.cpp AP_Logger: only write final log out a page at a time to avoid lock contention 2020-09-21 20:44:34 +10:00
AP_Logger_Block.h AP_Logger: stop logs safely in the block logger and asynchronously where possible 2020-09-17 10:45:57 +10:00
AP_Logger_DataFlash.cpp AP_Logger: make block logger conform to mavlink expectations of numbering 2020-09-05 10:20:39 +10:00
AP_Logger_DataFlash.h AP_Logger: mavlink backend needs to be the last backend 2020-01-02 18:18:04 +11:00
AP_Logger_File.cpp AP_Logger: AP_Logger_File: Set custom log directory in init 2020-10-20 09:31:49 +11:00
AP_Logger_File.h AP_Logger: make block logger conform to mavlink expectations of numbering 2020-09-05 10:20:39 +10:00
AP_Logger_MAVLink.cpp AP_Logger: keep pointer to link rather than using its ->chan 2020-09-25 09:01:00 +10:00
AP_Logger_MAVLink.h AP_Logger: keep pointer to link rather than using its ->chan 2020-09-25 09:01:00 +10:00
AP_Logger_MAVLinkLogTransfer.cpp AP_Logger: make block logger conform to mavlink expectations of numbering 2020-09-05 10:20:39 +10:00
AP_Logger_SITL.cpp AP_Logger: make block logger conform to mavlink expectations of numbering 2020-09-05 10:20:39 +10:00
AP_Logger_SITL.h AP_Logger: mavlink backend needs to be the last backend 2020-01-02 18:18:04 +11:00
LogFile.cpp AP_Logger: Log all vibration instances 2020-10-06 14:20:49 +11:00
LogStructure.h AP_Logger: Log all vibration instances 2020-10-06 14:20:49 +11:00
LoggerMessageWriter.cpp AP_Logger: make block logger conform to mavlink expectations of numbering 2020-09-05 10:20:39 +10:00
LoggerMessageWriter.h AP_Logger: remove unused FORMATS stage in DFLogStart messagewriter 2020-04-17 21:42:15 +10:00
README.md AP_Logger: add a README.md to help locating units/mults/fieldtypes 2019-06-04 19:00:11 +10:00

README.md

Logger Notes

Format Types

The format type specifies the amount of storage required for the entry and how the content should be interpreted.

Char C Type
a int16_t[32]
b int8_t
B uint8_t
h int16_t
H uint16_t
i int32_t
I uint32_t
f float
d double
n char[4]
N char[16]
Z char[64]
L int32_t latitude/longitude (so -35.1332423 becomes -351332423)
M uint8_t flight mode
q int64_t
Q uint64_t

Legacy field types - do not use. These have been replaced by using the base C type and an appropriate multiplier column entry.

Char CType+Mult
c int16_t * 100
C uint16_t * 100
e int32_t * 100
E uint32_t * 100

Units

All units here should be base units This does mean battery capacity is here as "amp*second" Please keep the names consistent with Tools/autotest/param_metadata/param.py:33

Char Unit Abbrev. Description
'-' "" no units e.g. Pi
'?' "UNKNOWN" Units which haven't been worked out yet....
'A' "A" Ampere
'd' "deg" of the angular variety
'b' "B" bytes
'k' "deg/s" degrees per second. Degrees are NOT SI
'D' "deglatitude" degrees of latitude
'e' "deg/s/s" degrees per second per second. Degrees are NOT SI
'E' "rad/s" radians per second
'G' "Gauss" Gauss is not an SI unit
'h' "degheading" 0.? to 359.?
'i' "A.s" Ampere second
'J' "W.s" Joule (Watt second)
'l' "l" litres
'L' "rad/s/s" radians per second per second
'm' "m" metres
'n' "m/s" metres per second
'N' "N" Newton
'o' "m/s/s" metres per second per second
'O' "degC" degrees Celsius. Not SI
'%' "%" percent
'S' "satellites" number of satellites
's' "s" seconds
'q' "rpm" rounds per minute. Not SI
'r' "rad" radians
'U' "deglongitude" degrees of longitude
'u' "ppm" pulses per minute
'v' "V" Volt
'P' "Pa" Pascal
'w' "Ohm" Ohm
'Y' "us" pulse width modulation in microseconds
'z' "Hz" Hertz
'#' "instance" (e.g.)Sensor instance number

Multipliers

This multiplier information applies to the raw value present in the log. Any adjustment implied by the format field (e.g. the "centi" in "centidegrees" is IGNORED for the purposes of scaling. Essentially "format" simply tells you the C-type, and format-type h (int16_t) is equivalent to format-type c (int16_t*100) tl;dr a GCS shouldn't/mustn't infer any scaling from the unit name

Char Multiplier
'-' 0
'?' 1
'2' 1e2
'1' 1e1
'0' 1e0
'A' 1e-1
'B' 1e-2
'C' 1e-3
'D' 1e-4
'E' 1e-5
'F' 1e-6
'G' 1e-7
'!' 3.6
'/' 3600