ardupilot/libraries/AP_HAL_ChibiOS/hwdef/MatekF405/hwdef-bl.dat

45 lines
807 B
Plaintext

# hw definition file for processing by chibios_pins.py
# for minimal F405 bootloader
# MCU class and specific type
MCU STM32F4xx STM32F405xx
# board ID for firmware load
APJ_BOARD_ID 125
# crystal frequency
OSCILLATOR_HZ 8000000
STM32_PLLM_VALUE 8
FLASH_SIZE_KB 1024
# bootloader is installed at zero offset
FLASH_RESERVE_START_KB 0
# LEDs
PB9 LED_BOOTLOADER OUTPUT LOW
PA14 LED_ACTIVITY OUTPUT LOW
define HAL_LED_ON 0
# the location where the bootloader will put the firmware
FLASH_BOOTLOADER_LOAD_KB 64
# board voltage
STM32_VDD 330U
# order of UARTs
UART_ORDER OTG1
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
define HAL_USE_EMPTY_STORAGE 1
define HAL_STORAGE_SIZE 15360
# Add CS pins to ensure they are high in bootloader
PB10 MAX7456_CS CS
PC1 SDCARD_CS CS
PC0 M25P16_CS CS
PC2 MPU6000_CS CS