mirror of https://github.com/ArduPilot/ardupilot
555 lines
19 KiB
C++
555 lines
19 KiB
C++
/*
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
/*
|
|
IMU temperature calibration handling
|
|
*/
|
|
|
|
#define AP_INLINE_VECTOR_OPS
|
|
|
|
#include "AP_InertialSensor_tempcal.h"
|
|
#include "AP_InertialSensor_config.h"
|
|
|
|
#if HAL_INS_TEMPERATURE_CAL_ENABLE
|
|
#include <GCS_MAVLink/GCS.h>
|
|
#include <AP_Logger/AP_Logger.h>
|
|
#include <AP_Common/ExpandingString.h>
|
|
#include <AP_Notify/AP_Notify.h>
|
|
#include "AP_InertialSensor.h"
|
|
|
|
// this scale factor ensures params are easy to work with in GUI parameter editors
|
|
#define SCALE_FACTOR 1.0e6
|
|
#define INV_SCALE_FACTOR 1.0e-6
|
|
#define TEMP_RANGE_MIN 10
|
|
|
|
// timeout calibration after 10 minutes, if no temperature rise
|
|
#define CAL_TIMEOUT_MS (600U*1000U)
|
|
|
|
/*
|
|
we use a fixed reference temperature of 35C. This has the advantage
|
|
that we don't need to know the final temperature when doing an
|
|
online calibration which allows us to have a calibration timeout
|
|
*/
|
|
#define TEMP_REFERENCE 35.0
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
|
|
// temperature calibration parameters, per IMU
|
|
const AP_Param::GroupInfo AP_InertialSensor_TCal::var_info[] = {
|
|
|
|
// @Param: ENABLE
|
|
// @DisplayName: Enable temperature calibration
|
|
// @Description: Enable the use of temperature calibration parameters for this IMU. For automatic learning set to 2 and also set the INS_TCALn_TMAX to the target temperature, then reboot
|
|
// @Values: 0:Disabled,1:Enabled,2:LearnCalibration
|
|
// @User: Advanced
|
|
// @RebootRequired: True
|
|
AP_GROUPINFO_FLAGS("ENABLE", 1, AP_InertialSensor_TCal, enable, float(Enable::Disabled), AP_PARAM_FLAG_ENABLE),
|
|
|
|
// @Param: TMIN
|
|
// @DisplayName: Temperature calibration min
|
|
// @Description: The minimum temperature that the calibration is valid for
|
|
// @Range: -70 80
|
|
// @Units: degC
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
AP_GROUPINFO("TMIN", 2, AP_InertialSensor_TCal, temp_min, 0),
|
|
|
|
// @Param: TMAX
|
|
// @DisplayName: Temperature calibration max
|
|
// @Description: The maximum temperature that the calibration is valid for. This must be at least 10 degrees above TMIN for calibration
|
|
// @Range: -70 80
|
|
// @Units: degC
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
AP_GROUPINFO("TMAX", 3, AP_InertialSensor_TCal, temp_max, 70),
|
|
|
|
// @Param: ACC1_X
|
|
// @DisplayName: Accelerometer 1st order temperature coefficient X axis
|
|
// @Description: This is the 1st order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: ACC1_Y
|
|
// @DisplayName: Accelerometer 1st order temperature coefficient Y axis
|
|
// @Description: This is the 1st order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: ACC1_Z
|
|
// @DisplayName: Accelerometer 1st order temperature coefficient Z axis
|
|
// @Description: This is the 1st order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
AP_GROUPINFO("ACC1", 4, AP_InertialSensor_TCal, accel_coeff[0], 0),
|
|
|
|
// @Param: ACC2_X
|
|
// @DisplayName: Accelerometer 2nd order temperature coefficient X axis
|
|
// @Description: This is the 2nd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: ACC2_Y
|
|
// @DisplayName: Accelerometer 2nd order temperature coefficient Y axis
|
|
// @Description: This is the 2nd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: ACC2_Z
|
|
// @DisplayName: Accelerometer 2nd order temperature coefficient Z axis
|
|
// @Description: This is the 2nd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
AP_GROUPINFO("ACC2", 5, AP_InertialSensor_TCal, accel_coeff[1], 0),
|
|
|
|
// @Param: ACC3_X
|
|
// @DisplayName: Accelerometer 3rd order temperature coefficient X axis
|
|
// @Description: This is the 3rd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: ACC3_Y
|
|
// @DisplayName: Accelerometer 3rd order temperature coefficient Y axis
|
|
// @Description: This is the 3rd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: ACC3_Z
|
|
// @DisplayName: Accelerometer 3rd order temperature coefficient Z axis
|
|
// @Description: This is the 3rd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
AP_GROUPINFO("ACC3", 6, AP_InertialSensor_TCal, accel_coeff[2], 0),
|
|
|
|
// @Param: GYR1_X
|
|
// @DisplayName: Gyroscope 1st order temperature coefficient X axis
|
|
// @Description: This is the 1st order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: GYR1_Y
|
|
// @DisplayName: Gyroscope 1st order temperature coefficient Y axis
|
|
// @Description: This is the 1st order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: GYR1_Z
|
|
// @DisplayName: Gyroscope 1st order temperature coefficient Z axis
|
|
// @Description: This is the 1st order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
AP_GROUPINFO("GYR1", 7, AP_InertialSensor_TCal, gyro_coeff[0], 0),
|
|
|
|
// @Param: GYR2_X
|
|
// @DisplayName: Gyroscope 2nd order temperature coefficient X axis
|
|
// @Description: This is the 2nd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: GYR2_Y
|
|
// @DisplayName: Gyroscope 2nd order temperature coefficient Y axis
|
|
// @Description: This is the 2nd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: GYR2_Z
|
|
// @DisplayName: Gyroscope 2nd order temperature coefficient Z axis
|
|
// @Description: This is the 2nd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
AP_GROUPINFO("GYR2", 8, AP_InertialSensor_TCal, gyro_coeff[1], 0),
|
|
|
|
// @Param: GYR3_X
|
|
// @DisplayName: Gyroscope 3rd order temperature coefficient X axis
|
|
// @Description: This is the 3rd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: GYR3_Y
|
|
// @DisplayName: Gyroscope 3rd order temperature coefficient Y axis
|
|
// @Description: This is the 3rd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
// @Param: GYR3_Z
|
|
// @DisplayName: Gyroscope 3rd order temperature coefficient Z axis
|
|
// @Description: This is the 3rd order temperature coefficient from a temperature calibration
|
|
// @User: Advanced
|
|
// @Calibration: 1
|
|
|
|
AP_GROUPINFO("GYR3", 9, AP_InertialSensor_TCal, gyro_coeff[2], 0),
|
|
|
|
AP_GROUPEND
|
|
};
|
|
|
|
|
|
/*
|
|
evaluate a 3rd order polynomial (without the constant term) given a set of coefficients
|
|
*/
|
|
Vector3f AP_InertialSensor_TCal::polynomial_eval(float tdiff, const AP_Vector3f coeff[3]) const
|
|
{
|
|
// evaluate order 3 polynomial
|
|
const Vector3f *c = (Vector3f *)&coeff[0];
|
|
return (c[0] + (c[1] + c[2]*tdiff)*tdiff)*tdiff*INV_SCALE_FACTOR;
|
|
}
|
|
|
|
/*
|
|
correct a single sensor for the current temperature
|
|
*/
|
|
void AP_InertialSensor_TCal::correct_sensor(float temperature, float cal_temp, const AP_Vector3f coeff[3], Vector3f &v) const
|
|
{
|
|
if (enable != Enable::Enabled) {
|
|
return;
|
|
}
|
|
temperature = constrain_float(temperature, temp_min, temp_max);
|
|
cal_temp = constrain_float(cal_temp, temp_min, temp_max);
|
|
|
|
|
|
// get the polynomial correction for the difference between the
|
|
// current temperature and the mid temperature
|
|
v -= polynomial_eval(temperature - TEMP_REFERENCE, coeff);
|
|
|
|
// we need to add the correction for the temperature
|
|
// difference between the TREF, which is the reference used for
|
|
// the calibration process, and the cal_temp, which is the
|
|
// temperature that the offsets and scale factors was setup for
|
|
v += polynomial_eval(cal_temp - TEMP_REFERENCE, coeff);
|
|
}
|
|
|
|
void AP_InertialSensor_TCal::correct_accel(float temperature, float cal_temp, Vector3f &accel) const
|
|
{
|
|
correct_sensor(temperature, cal_temp, accel_coeff, accel);
|
|
}
|
|
|
|
void AP_InertialSensor_TCal::correct_gyro(float temperature, float cal_temp, Vector3f &gyro) const
|
|
{
|
|
correct_sensor(temperature, cal_temp, gyro_coeff, gyro);
|
|
}
|
|
|
|
/*
|
|
for SITL we don't apply the temperature limits and use mid-point as
|
|
reference. This makes the SITL data independent of TEMP_REFERENCE
|
|
and prevents an abrupt change at the endpoints
|
|
*/
|
|
void AP_InertialSensor_TCal::sitl_apply_accel(float temperature, Vector3f &accel) const
|
|
{
|
|
const float tmid = 0.5*(temp_max+temp_min);
|
|
accel += polynomial_eval(temperature - tmid, accel_coeff);
|
|
}
|
|
|
|
void AP_InertialSensor_TCal::sitl_apply_gyro(float temperature, Vector3f &gyro) const
|
|
{
|
|
const float tmid = 0.5*(temp_max+temp_min);
|
|
gyro += polynomial_eval(temperature - tmid, gyro_coeff);
|
|
}
|
|
|
|
AP_InertialSensor_TCal::Learn::Learn(AP_InertialSensor_TCal &_tcal, float _start_temp) :
|
|
start_temp(_start_temp),
|
|
tcal(_tcal)
|
|
{
|
|
reset(_start_temp);
|
|
}
|
|
|
|
/*
|
|
update polyfit with new sample
|
|
*/
|
|
void AP_InertialSensor_TCal::Learn::add_sample(const Vector3f &sample, float temperature, struct LearnState &st)
|
|
{
|
|
temperature = st.temp_filter.apply(temperature);
|
|
|
|
st.sum += sample;
|
|
st.sum_count++;
|
|
|
|
uint32_t now = AP_HAL::millis();
|
|
|
|
if (st.sum_count < 100 ||
|
|
temperature - st.last_temp < 0.5) {
|
|
// check for timeout
|
|
if (st.last_sample_ms != 0 &&
|
|
temperature - start_temp >= TEMP_RANGE_MIN &&
|
|
now - st.last_sample_ms > CAL_TIMEOUT_MS) {
|
|
// we have timed out, finish up now
|
|
finish_calibration(st.last_temp);
|
|
}
|
|
// wait for more data
|
|
return;
|
|
}
|
|
|
|
st.sum /= st.sum_count;
|
|
|
|
const uint8_t si = &st - &state[0];
|
|
|
|
const float T = (temperature + st.last_temp) * 0.5;
|
|
|
|
if (si == 0) {
|
|
// we use the first accel sample as the zero baseline
|
|
if (accel_start.is_zero()) {
|
|
accel_start = st.sum;
|
|
start_temp = T;
|
|
}
|
|
st.sum -= accel_start;
|
|
}
|
|
|
|
const float tdiff = T - TEMP_REFERENCE;
|
|
#if HAL_LOGGING_ENABLED
|
|
AP::logger().Write("TCLR", "TimeUS,I,SType,Temp,X,Y,Z,NSamp",
|
|
"s#------",
|
|
"F000000-",
|
|
"QBBffffI",
|
|
AP_HAL::micros64(),
|
|
instance(),
|
|
si,
|
|
T,
|
|
st.sum.x, st.sum.y, st.sum.z,
|
|
st.sum_count);
|
|
#endif
|
|
|
|
|
|
st.pfit.update(tdiff, st.sum);
|
|
|
|
st.sum.zero();
|
|
st.sum_count = 0;
|
|
st.last_temp = temperature;
|
|
st.last_sample_ms = now;
|
|
|
|
if (temperature - start_temp >= TEMP_RANGE_MIN) {
|
|
if (temperature >= start_tmax) {
|
|
// we've reached the target temperature
|
|
finish_calibration(temperature);
|
|
} else if (now - last_save_ms > 15000) {
|
|
// save partial calibration, so if user stops the cal part
|
|
// way then they still have a useful calibration
|
|
last_save_ms = now;
|
|
save_calibration(st.last_temp);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
update accel temperature compensation learning
|
|
*/
|
|
void AP_InertialSensor_TCal::update_accel_learning(const Vector3f &accel, float temperature)
|
|
{
|
|
if (enable != Enable::LearnCalibration) {
|
|
return;
|
|
}
|
|
if (learn == nullptr && hal.scheduler->is_system_initialized()) {
|
|
learn = NEW_NOTHROW Learn(*this, temperature);
|
|
if (learn) {
|
|
GCS_SEND_TEXT(MAV_SEVERITY_WARNING, "TCAL[%u]: started calibration t=%.1fC tmax=%.1fC",
|
|
instance()+1,
|
|
temperature, learn->start_tmax);
|
|
AP_Notify::events.initiated_temp_cal = 1;
|
|
}
|
|
}
|
|
if (learn != nullptr) {
|
|
AP_Notify::flags.temp_cal_running = true;
|
|
learn->add_sample(accel, temperature, learn->state[0]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
update gyro temperature compensation learning
|
|
*/
|
|
void AP_InertialSensor_TCal::update_gyro_learning(const Vector3f &gyro, float temperature)
|
|
{
|
|
if (enable != Enable::LearnCalibration) {
|
|
return;
|
|
}
|
|
if (learn != nullptr) {
|
|
learn->add_sample(gyro, temperature, learn->state[1]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
reset calibration
|
|
*/
|
|
void AP_InertialSensor_TCal::Learn::reset(float temperature)
|
|
{
|
|
memset((void*)&state[0], 0, sizeof(state));
|
|
start_tmax = tcal.temp_max;
|
|
accel_start.zero();
|
|
for (uint8_t i=0; i<ARRAY_SIZE(state); i++) {
|
|
state[i].temp_filter.set_cutoff_frequency(1000, 0.5);
|
|
state[i].temp_filter.reset(temperature);
|
|
state[i].last_temp = temperature;
|
|
}
|
|
}
|
|
|
|
/*
|
|
finish and save calibration
|
|
*/
|
|
void AP_InertialSensor_TCal::Learn::finish_calibration(float temperature)
|
|
{
|
|
if (!save_calibration(temperature)) {
|
|
GCS_SEND_TEXT(MAV_SEVERITY_WARNING, "TCAL[%u]: failed fit", instance()+1);
|
|
AP_Notify::events.temp_cal_failed = 1;
|
|
tcal.enable.set_and_save_ifchanged(int8_t(AP_InertialSensor_TCal::Enable::Disabled));
|
|
return;
|
|
}
|
|
GCS_SEND_TEXT(MAV_SEVERITY_WARNING, "TCAL[%u]: completed calibration tmin=%.1f tmax=%.1f",
|
|
instance()+1,
|
|
tcal.temp_min.get(), tcal.temp_max.get());
|
|
tcal.enable.set_and_save_ifchanged(int8_t(AP_InertialSensor_TCal::Enable::Enabled));
|
|
}
|
|
|
|
/*
|
|
save calibration state
|
|
*/
|
|
bool AP_InertialSensor_TCal::Learn::save_calibration(float temperature)
|
|
{
|
|
Vector3f coefficients[3];
|
|
|
|
Vector3f p[4];
|
|
if (!state[0].pfit.get_polynomial(p)) {
|
|
return false;
|
|
}
|
|
for (uint8_t k=0; k<3; k++) {
|
|
coefficients[k] = p[2-k] * SCALE_FACTOR;
|
|
}
|
|
|
|
for (uint8_t k=0; k<3; k++) {
|
|
tcal.accel_coeff[k].set_and_save_ifchanged(coefficients[k]);
|
|
}
|
|
|
|
if (!state[1].pfit.get_polynomial(p)) {
|
|
return false;
|
|
}
|
|
for (uint8_t k=0; k<3; k++) {
|
|
coefficients[k] = p[2-k] * SCALE_FACTOR;
|
|
}
|
|
|
|
for (uint8_t k=0; k<3; k++) {
|
|
tcal.gyro_coeff[k].set_and_save_ifchanged(coefficients[k]);
|
|
}
|
|
tcal.temp_min.set_and_save_ifchanged(start_temp);
|
|
tcal.temp_max.set_and_save_ifchanged(temperature);
|
|
return true;
|
|
}
|
|
|
|
uint8_t AP_InertialSensor_TCal::instance(void) const
|
|
{
|
|
return AP::ins().tcal_instance(*this);
|
|
}
|
|
|
|
/*
|
|
get a string representation of parameters for this calibration set
|
|
*/
|
|
void AP_InertialSensor_TCal::get_persistent_params(ExpandingString &str) const
|
|
{
|
|
if (enable != AP_InertialSensor_TCal::Enable::Enabled) {
|
|
return;
|
|
}
|
|
const uint8_t imu = instance()+1;
|
|
#if INS_AUX_INSTANCES
|
|
if (imu > 3) {
|
|
str.printf("INS%u_TCAL_ENABLE=1\n", imu);
|
|
str.printf("INS%u_TCAL_TMIN=%.2f\n", imu, temp_min.get());
|
|
str.printf("INS%u_TCAL_TMAX=%.2f\n", imu, temp_max.get());
|
|
for (uint8_t k=0; k<3; k++) {
|
|
const Vector3f &acc = accel_coeff[k].get();
|
|
const Vector3f &gyr = gyro_coeff[k].get();
|
|
str.printf("INS%u_TCAL_ACC%u_X=%f\n", imu, k+1, acc.x);
|
|
str.printf("INS%u_TCAL_ACC%u_Y=%f\n", imu, k+1, acc.y);
|
|
str.printf("INS%u_TCAL_ACC%u_Z=%f\n", imu, k+1, acc.z);
|
|
str.printf("INS%u_TCAL_GYR%u_X=%f\n", imu, k+1, gyr.x);
|
|
str.printf("INS%u_TCAL_GYR%u_Y=%f\n", imu, k+1, gyr.y);
|
|
str.printf("INS%u_TCAL_GYR%u_Z=%f\n", imu, k+1, gyr.z);
|
|
}
|
|
return;
|
|
}
|
|
#endif
|
|
str.printf("INS_TCAL%u_ENABLE=1\n", imu);
|
|
str.printf("INS_TCAL%u_TMIN=%.2f\n", imu, temp_min.get());
|
|
str.printf("INS_TCAL%u_TMAX=%.2f\n", imu, temp_max.get());
|
|
for (uint8_t k=0; k<3; k++) {
|
|
const Vector3f &acc = accel_coeff[k].get();
|
|
const Vector3f &gyr = gyro_coeff[k].get();
|
|
str.printf("INS_TCAL%u_ACC%u_X=%f\n", imu, k+1, acc.x);
|
|
str.printf("INS_TCAL%u_ACC%u_Y=%f\n", imu, k+1, acc.y);
|
|
str.printf("INS_TCAL%u_ACC%u_Z=%f\n", imu, k+1, acc.z);
|
|
str.printf("INS_TCAL%u_GYR%u_X=%f\n", imu, k+1, gyr.x);
|
|
str.printf("INS_TCAL%u_GYR%u_Y=%f\n", imu, k+1, gyr.y);
|
|
str.printf("INS_TCAL%u_GYR%u_Z=%f\n", imu, k+1, gyr.z);
|
|
}
|
|
}
|
|
|
|
/*
|
|
get a string representation of parameters that should be made
|
|
persistent across changes of firmware type
|
|
*/
|
|
void AP_InertialSensor::get_persistent_params(ExpandingString &str) const
|
|
{
|
|
bool save_options = false;
|
|
if (uint32_t(tcal_options.get()) & uint32_t(TCalOptions::PERSIST_ACCEL_CAL)) {
|
|
save_options = true;
|
|
for (uint8_t i=0; i<(INS_MAX_INSTANCES-INS_AUX_INSTANCES); i++) {
|
|
const uint8_t imu = i+1;
|
|
const Vector3f &aoff = _accel_offset(i).get();
|
|
const Vector3f &ascl = _accel_scale(i).get();
|
|
char id[2] = "";
|
|
if (i > 0) {
|
|
id[0] = '1'+i;
|
|
}
|
|
str.printf("INS_ACC%s_ID=%u\n", id, unsigned(_accel_id(i).get()));
|
|
str.printf("INS_ACC%sOFFS_X=%f\n", id, aoff.x);
|
|
str.printf("INS_ACC%sOFFS_Y=%f\n", id, aoff.y);
|
|
str.printf("INS_ACC%sOFFS_Z=%f\n", id, aoff.z);
|
|
str.printf("INS_ACC%sSCAL_X=%f\n", id, ascl.x);
|
|
str.printf("INS_ACC%sSCAL_Y=%f\n", id, ascl.y);
|
|
str.printf("INS_ACC%sSCAL_Z=%f\n", id, ascl.z);
|
|
str.printf("INS_ACC%u_CALTEMP=%.2f\n", imu, caltemp_accel(i).get());
|
|
}
|
|
#if INS_AUX_INSTANCES
|
|
for (uint8_t i=0; i<INS_AUX_INSTANCES; i++) {
|
|
const uint8_t imu = i+(INS_MAX_INSTANCES-INS_AUX_INSTANCES)+1;
|
|
const Vector3f &aoff = params[i]._accel_offset.get();
|
|
const Vector3f &ascl = params[i]._accel_scale.get();
|
|
str.printf("INS%u_ACC_ID=%u\n", imu, unsigned(params[i]._accel_id.get()));
|
|
str.printf("INS%u_ACCOFFS_X=%f\n", imu, aoff.x);
|
|
str.printf("INS%u_ACCOFFS_Y=%f\n", imu, aoff.y);
|
|
str.printf("INS%u_ACCOFFS_Z=%f\n", imu, aoff.z);
|
|
str.printf("INS%u_ACCSCAL_X=%f\n", imu, ascl.x);
|
|
str.printf("INS%u_ACCSCAL_Y=%f\n", imu, ascl.y);
|
|
str.printf("INS%u_ACC_CALTEMP=%.2f\n", imu, params[i].caltemp_accel.get());
|
|
}
|
|
#endif
|
|
}
|
|
if (uint32_t(tcal_options.get()) & uint32_t(TCalOptions::PERSIST_TEMP_CAL)) {
|
|
for (auto &tc : tcal_old_param) {
|
|
tc.get_persistent_params(str);
|
|
}
|
|
#if INS_AUX_INSTANCES
|
|
for (uint8_t i=0; i<INS_AUX_INSTANCES; i++) {
|
|
params[i].tcal.get_persistent_params(str);
|
|
}
|
|
#endif
|
|
save_options = true;
|
|
}
|
|
if (save_options) {
|
|
/*
|
|
we also have to save the TCAL_OPTIONS parameter so that
|
|
future flashing of the bootloader doesn't cause an erase
|
|
*/
|
|
str.printf("INS_TCAL_OPTIONS=%u\n", unsigned(tcal_options.get()));
|
|
}
|
|
}
|
|
|
|
|
|
#endif // HAL_INS_TEMPERATURE_CAL_ENABLE
|