ardupilot/APMrover2/config.h

244 lines
6.0 KiB
C

//
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//
// WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
//
// DO NOT EDIT this file to adjust your configuration. Create your own
// APM_Config.h and use APM_Config.h.example as a reference.
//
// WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
///
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//
// Default and automatic configuration details.
//
// Notes for maintainers:
//
// - Try to keep this file organised in the same order as APM_Config.h.example
//
#pragma once
#include "defines.h"
///
/// DO NOT EDIT THIS INCLUDE - if you want to make a local change, make that
/// change in your local copy of APM_Config.h.
///
#include "APM_Config.h" // <== THIS INCLUDE, DO NOT EDIT IT. EVER.
///
/// DO NOT EDIT THIS INCLUDE - if you want to make a local change, make that
/// change in your local copy of APM_Config.h.
///
//////////////////////////////////////////////////////////////////////////////
// sensor types
//////////////////////////////////////////////////////////////////////////////
// HIL_MODE OPTIONAL
#ifndef HIL_MODE
#define HIL_MODE HIL_MODE_DISABLED
#endif
#if CONFIG_HAL_BOARD == HAL_BOARD_SITL
#define BATTERY_PIN_1 1
#define CURRENT_PIN_1 2
#elif CONFIG_HAL_BOARD == HAL_BOARD_PX4
#define BATTERY_PIN_1 -1
#define CURRENT_PIN_1 -1
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX
#define BATTERY_PIN_1 -1
#define CURRENT_PIN_1 -1
#elif CONFIG_HAL_BOARD == HAL_BOARD_VRBRAIN
#define BATTERY_PIN_1 -1
#define CURRENT_PIN_1 -1
#endif
//////////////////////////////////////////////////////////////////////////////
// HIL_MODE OPTIONAL
#ifndef HIL_MODE
#define HIL_MODE HIL_MODE_DISABLED
#endif
#ifndef MAV_SYSTEM_ID
#define MAV_SYSTEM_ID 1
#endif
//////////////////////////////////////////////////////////////////////////////
// FrSky telemetry support
//
#ifndef FRSKY_TELEM_ENABLED
#define FRSKY_TELEM_ENABLED ENABLED
#endif
#ifndef CH7_OPTION
#define CH7_OPTION CH7_SAVE_WP
#endif
#ifndef TUNING_OPTION
#define TUNING_OPTION TUN_NONE
#endif
//////////////////////////////////////////////////////////////////////////////
// MAGNETOMETER
#ifndef MAGNETOMETER
#define MAGNETOMETER ENABLED
#endif
//////////////////////////////////////////////////////////////////////////////
// MODE
// MODE_CHANNEL
//
#ifndef MODE_CHANNEL
#define MODE_CHANNEL 8
#endif
#if (MODE_CHANNEL != 5) && (MODE_CHANNEL != 6) && (MODE_CHANNEL != 7) && (MODE_CHANNEL != 8)
#error XXX
#error XXX You must set MODE_CHANNEL to 5, 6, 7 or 8
#error XXX
#endif
#if !defined(MODE_1)
#define MODE_1 LEARNING
#endif
#if !defined(MODE_2)
#define MODE_2 LEARNING
#endif
#if !defined(MODE_3)
#define MODE_3 LEARNING
#endif
#if !defined(MODE_4)
#define MODE_4 LEARNING
#endif
#if !defined(MODE_5)
#define MODE_5 LEARNING
#endif
#if !defined(MODE_6)
#define MODE_6 MANUAL
#endif
//////////////////////////////////////////////////////////////////////////////
// failsafe defaults
#ifndef THROTTLE_FAILSAFE
#define THROTTLE_FAILSAFE ENABLED
#endif
#ifndef THROTTLE_FS_VALUE
#define THROTTLE_FS_VALUE 950
#endif
#ifndef LONG_FAILSAFE_ACTION
#define LONG_FAILSAFE_ACTION 0
#endif
#ifndef GCS_HEARTBEAT_FAILSAFE
#define GCS_HEARTBEAT_FAILSAFE DISABLED
#endif
//////////////////////////////////////////////////////////////////////////////
// THROTTLE_OUT
//
#ifndef THROTTE_OUT
#define THROTTLE_OUT ENABLED
#endif
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// STARTUP BEHAVIOUR
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// GROUND_START_DELAY
//
#ifndef GROUND_START_DELAY
#define GROUND_START_DELAY 0
#endif
//////////////////////////////////////////////////////////////////////////////
// MOUNT (ANTENNA OR CAMERA)
//
#ifndef MOUNT
#define MOUNT ENABLED
#endif
//////////////////////////////////////////////////////////////////////////////
// CAMERA control
//
#ifndef CAMERA
#define CAMERA ENABLED
#endif
//////////////////////////////////////////////////////////////////////////////
// NAVL1
//
#ifndef NAVL1
#define NAVL1_PERIOD 8
#endif
//////////////////////////////////////////////////////////////////////////////
// AIRSPEED_CRUISE
//
#ifndef SPEED_CRUISE
#define SPEED_CRUISE 5 // in m/s
#endif
#ifndef TURN_GAIN
#define TURN_GAIN 5
#endif
//////////////////////////////////////////////////////////////////////////////
// Servo Mapping
//
#ifndef THROTTLE_MIN
#define THROTTLE_MIN 0 // percent
#endif
#ifndef THROTTLE_CRUISE
#define THROTTLE_CRUISE 45
#endif
#ifndef THROTTLE_MAX
#define THROTTLE_MAX 100
#endif
//////////////////////////////////////////////////////////////////////////////
// Dataflash logging control
//
#ifndef LOGGING_ENABLED
#define LOGGING_ENABLED ENABLED
#endif
#define DEFAULT_LOG_BITMASK 0xffff
//////////////////////////////////////////////////////////////////////////////
// Developer Items
//
// use this to enable servos in HIL mode
#ifndef HIL_SERVOS
#define HIL_SERVOS DISABLED
#endif
// use this to completely disable the CLI
#ifndef CLI_ENABLED
#define CLI_ENABLED ENABLED
#endif
// if RESET_SWITCH_CH is not zero, then this is the PWM value on
// that channel where we reset the control mode to the current switch
// position (to for example return to switched mode after failsafe or
// fence breach)
#ifndef RESET_SWITCH_CHAN_PWM
#define RESET_SWITCH_CHAN_PWM 1750
#endif
#ifndef ADVANCED_FAILSAFE
#define ADVANCED_FAILSAFE DISABLED
#endif