ardupilot/libraries/AP_Notify/AP_BoardLED.h

82 lines
2.6 KiB
C++

/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __AP_HAL_BOARDLED_H__
#define __AP_HAL_BOARDLED_H__
#include <AP_Common.h>
#include <AP_HAL.h>
#define HIGH 1
#define LOW 0
#if CONFIG_HAL_BOARD == HAL_BOARD_APM1
# define HAL_GPIO_A_LED_PIN 37
# define HAL_GPIO_B_LED_PIN 36
# define HAL_GPIO_C_LED_PIN 35
# define HAL_GPIO_LED_ON HIGH
# define HAL_GPIO_LED_OFF LOW
#elif CONFIG_HAL_BOARD == HAL_BOARD_APM2
# define HAL_GPIO_A_LED_PIN 27
# define HAL_GPIO_B_LED_PIN 26
# define HAL_GPIO_C_LED_PIN 25
# define HAL_GPIO_LED_ON LOW
# define HAL_GPIO_LED_OFF HIGH
#elif CONFIG_HAL_BOARD == HAL_BOARD_PX4
# define HAL_GPIO_A_LED_PIN 27
# define HAL_GPIO_B_LED_PIN 26
# define HAL_GPIO_C_LED_PIN 25
# define HAL_GPIO_LED_ON LOW
# define HAL_GPIO_LED_OFF HIGH
#elif CONFIG_HAL_BOARD == HAL_BOARD_FLYMAPLE
# define HAL_GPIO_A_LED_PIN 13
# define HAL_GPIO_B_LED_PIN 13
# define HAL_GPIO_C_LED_PIN 13
# define HAL_GPIO_LED_ON LOW
# define HAL_GPIO_LED_OFF HIGH
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX || CONFIG_HAL_BOARD == HAL_BOARD_AVR_SITL
# define HAL_GPIO_A_LED_PIN 61
# define HAL_GPIO_B_LED_PIN 48
# define HAL_GPIO_C_LED_PIN 117
# define HAL_GPIO_LED_ON LOW
# define HAL_GPIO_LED_OFF HIGH
#elif CONFIG_HAL_BOARD == HAL_BOARD_VRBRAIN
# define HAL_GPIO_A_LED_PIN 25
# define HAL_GPIO_B_LED_PIN 26
# define HAL_GPIO_C_LED_PIN 27
# define HAL_GPIO_LED_ON HIGH
# define HAL_GPIO_LED_OFF LOW
#else
#error "Unknown board type in AP_Notify"
#endif
class AP_BoardLED
{
public:
// initialise the LED driver
void init(void);
// should be called at 50Hz
void update(void);
private:
// counter incremented at 50Hz
uint8_t _counter;
};
#endif // __AP_HAL_BOARDLED_H__