| .. |
|
hwdef
|
HAL_ChibiOS: allow printf() to work on systems without debug console
|
2018-05-26 19:06:25 +10:00 |
|
AP_HAL_ChibiOS.h
|
HAL_Chibios: added ChibiOS HAL
|
2018-01-15 11:46:02 +11:00 |
|
AP_HAL_ChibiOS_Namespace.h
|
HAL_ChibiOS: added support for interrupt based rcin parsing
|
2018-04-24 08:03:46 +10:00 |
|
AP_HAL_ChibiOS_Private.h
|
HAL_Chibios: added ChibiOS HAL
|
2018-01-15 11:46:02 +11:00 |
|
AnalogIn.cpp
|
HAL_ChibiOS: make smaller builds possible
|
2018-04-12 11:50:44 +10:00 |
|
AnalogIn.h
|
HAL_ChibiOS: make smaller builds possible
|
2018-04-12 11:50:44 +10:00 |
|
CAN.cpp
|
HAL_ChibiOS: run can loop much more often
|
2018-05-25 13:53:17 +10:00 |
|
CAN.h
|
HAL_ChibiOS: run can loop much more often
|
2018-05-25 13:53:17 +10:00 |
|
Device.cpp
|
HAL_ChibiOS: make smaller builds possible
|
2018-04-12 11:50:44 +10:00 |
|
Device.h
|
HAL_ChibiOS: add support for CCM memory
|
2018-01-15 11:46:02 +11:00 |
|
GPIO.cpp
|
HAL_ChibiOS: make smaller builds possible
|
2018-04-12 11:50:44 +10:00 |
|
GPIO.h
|
HAL_ChibiOS: don't require GPIO() markers on PWM outputs
|
2018-04-09 15:32:04 +10:00 |
|
HAL_ChibiOS_Class.cpp
|
HAL_ChibiOS: make smaller builds possible
|
2018-04-12 11:50:44 +10:00 |
|
HAL_ChibiOS_Class.h
|
waf: use relative paths for ChibiOS build
|
2018-03-02 12:52:50 +11:00 |
|
I2CDevice.cpp
|
AP_HAL_ChibiOS: add STM32F7 I2C support
|
2018-04-29 07:59:52 +10:00 |
|
I2CDevice.h
|
AP_HAL_ChibiOS: add STM32F7 I2C support
|
2018-04-29 07:59:52 +10:00 |
|
RCInput.cpp
|
AP_HAL_ChibiOS: HAL_RCINPUT_WITH_AP_RADIO definition
|
2018-05-22 08:35:01 +09:00 |
|
RCInput.h
|
AP_HAL_ChibiOS: HAL_RCINPUT_WITH_AP_RADIO definition
|
2018-05-22 08:35:01 +09:00 |
|
RCOutput.cpp
|
HAL_ChibiOS: maintain rcout state beyond BRD_PWM_COUNT
|
2018-05-26 12:08:54 +10:00 |
|
RCOutput.h
|
HAL_ChibiOS: maintain rcout state beyond BRD_PWM_COUNT
|
2018-05-26 12:08:54 +10:00 |
|
SPIDevice.cpp
|
AP_HAL_ChibiOS: fix spi clock calculation
|
2018-04-19 08:32:31 +10:00 |
|
SPIDevice.h
|
HAL_ChibiOS: fixed SPI bus speed on SPI3
|
2018-04-07 09:10:29 +10:00 |
|
Scheduler.cpp
|
HAL_ChibiOS: fixed assert in reboot
|
2018-05-26 17:23:46 +10:00 |
|
Scheduler.h
|
AP_HAL_ChibiOS: move delay callback handling to base HAL Scheduler class
|
2018-05-09 16:15:38 +10:00 |
|
Semaphores.cpp
|
HAL_ChibiOS: make smaller builds possible
|
2018-04-12 11:50:44 +10:00 |
|
Semaphores.h
|
HAL_ChibiOS: make smaller builds possible
|
2018-04-12 11:50:44 +10:00 |
|
SoftSigReader.cpp
|
HAL_ChibiOS: added input capture filter
|
2018-04-28 07:31:58 +10:00 |
|
SoftSigReader.h
|
HAL_ChibiOS: fixed RC in on CH1 of timer
|
2018-02-07 20:33:45 +11:00 |
|
SoftSigReaderInt.cpp
|
HAL_ChibiOS: Fixed s-bus signal polarity in SoftSigReaderInt.cpp
|
2018-05-07 11:46:35 +10:00 |
|
SoftSigReaderInt.h
|
HAL_ChibiOS: added support for interrupt based rcin parsing
|
2018-04-24 08:03:46 +10:00 |
|
Storage.cpp
|
HAL_ChibiOS: allow for bare board builds
|
2018-03-02 12:52:50 +11:00 |
|
Storage.h
|
HAL_ChibiOS: allow for bare board builds
|
2018-03-02 12:52:50 +11:00 |
|
ToneAlarm.cpp
|
AP_HAL_ChibiOS: add mode-change-beeps
|
2018-04-19 09:29:41 +10:00 |
|
ToneAlarm.h
|
AP_HAL_ChibiOS: add mode-change-beeps
|
2018-04-19 09:29:41 +10:00 |
|
UARTDriver.cpp
|
HAL_ChibiOS: allow printf() to work on systems without debug console
|
2018-05-26 19:06:25 +10:00 |
|
UARTDriver.h
|
HAL_ChibiOS: take account of available bytes in receive_time_constraint_us
|
2018-05-21 14:53:18 +10:00 |
|
Util.cpp
|
HAL_ChibiOS: implement fmuv4 safety state
|
2018-04-17 10:14:01 +10:00 |
|
Util.h
|
AP_HAL_ChibiOS: make ToneAlarm compilation conditional on presence of
|
2018-02-11 14:55:23 +11:00 |
|
shared_dma.cpp
|
HAL_ChibiOS: support DShot output
|
2018-04-07 09:10:29 +10:00 |
|
shared_dma.h
|
HAL_ChibiOS: support DShot output
|
2018-04-07 09:10:29 +10:00 |
|
system.cpp
|
HAL_ChibiOS: fixed build warnings
|
2018-02-07 20:33:45 +11:00 |
7b720aae46