mirror of https://github.com/ArduPilot/ardupilot
141 lines
3.8 KiB
C++
141 lines
3.8 KiB
C++
// -*- tab-width: 4; Mode: C++; c-basic-offset: 3; indent-tabs-mode: t -*-
|
|
/*
|
|
AP_Compass_HMC5843.cpp - Arduino Library for HMC5843 I2C magnetometer
|
|
Code by Jordi Muñoz and Jose Julio. DIYDrones.com
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
Sensor is conected to I2C port
|
|
Sensor is initialized in Continuos mode (10Hz)
|
|
|
|
*/
|
|
|
|
// AVR LibC Includes
|
|
#include <math.h>
|
|
#include "WConstants.h"
|
|
|
|
#include <Wire.h>
|
|
#include "AP_Compass_HMC5843.h"
|
|
|
|
#define COMPASS_ADDRESS 0x1E
|
|
#define ConfigRegA 0x00
|
|
#define ConfigRegB 0x01
|
|
#define magGain 0x20
|
|
#define PositiveBiasConfig 0x11
|
|
#define NegativeBiasConfig 0x12
|
|
#define NormalOperation 0x10
|
|
#define ModeRegister 0x02
|
|
#define ContinuousConversion 0x00
|
|
#define SingleConversion 0x01
|
|
|
|
// Public Methods //////////////////////////////////////////////////////////////
|
|
bool AP_Compass_HMC5843::init()
|
|
{
|
|
int numAttempts = 0;
|
|
int success = 0;
|
|
|
|
delay(10);
|
|
|
|
// calibration initialisation
|
|
calibration[0] = 1.0;
|
|
calibration[1] = 1.0;
|
|
calibration[2] = 1.0;
|
|
|
|
while( success == 0 && numAttempts < 5 )
|
|
{
|
|
// record number of attempts at initialisation
|
|
numAttempts++;
|
|
|
|
// force positiveBias (compass should return 715 for all channels)
|
|
Wire.beginTransmission(COMPASS_ADDRESS);
|
|
Wire.send(ConfigRegA);
|
|
Wire.send(PositiveBiasConfig);
|
|
if (0 != Wire.endTransmission())
|
|
continue; // compass not responding on the bus
|
|
delay(50);
|
|
|
|
// set gains
|
|
Wire.beginTransmission(COMPASS_ADDRESS);
|
|
Wire.send(ConfigRegB);
|
|
Wire.send(magGain);
|
|
Wire.endTransmission();
|
|
delay(10);
|
|
|
|
Wire.beginTransmission(COMPASS_ADDRESS);
|
|
Wire.send(ModeRegister);
|
|
Wire.send(SingleConversion);
|
|
Wire.endTransmission();
|
|
delay(10);
|
|
|
|
// read values from the compass
|
|
read();
|
|
delay(10);
|
|
|
|
// calibrate
|
|
if( abs(mag_x) > 500 && abs(mag_x) < 1000 && abs(mag_y) > 500 && abs(mag_y) < 1000 && abs(mag_z) > 500 && abs(mag_z) < 1000)
|
|
{
|
|
calibration[0] = fabs(715.0 / mag_x);
|
|
calibration[1] = fabs(715.0 / mag_y);
|
|
calibration[2] = fabs(715.0 / mag_z);
|
|
|
|
// mark success
|
|
success = 1;
|
|
}
|
|
|
|
// leave test mode
|
|
Wire.beginTransmission(COMPASS_ADDRESS);
|
|
Wire.send(ConfigRegA);
|
|
Wire.send(NormalOperation);
|
|
Wire.endTransmission();
|
|
delay(50);
|
|
|
|
Wire.beginTransmission(COMPASS_ADDRESS);
|
|
Wire.send(ModeRegister);
|
|
Wire.send(ContinuousConversion); // Set continuous mode (default to 10Hz)
|
|
Wire.endTransmission(); // End transmission
|
|
delay(50);
|
|
}
|
|
return(success);
|
|
}
|
|
|
|
// Read Sensor data
|
|
void AP_Compass_HMC5843::read()
|
|
{
|
|
int i = 0;
|
|
byte buff[6];
|
|
Vector3f rot_mag;
|
|
|
|
Wire.beginTransmission(COMPASS_ADDRESS);
|
|
Wire.send(0x03); //sends address to read from
|
|
Wire.endTransmission(); //end transmission
|
|
|
|
//Wire.beginTransmission(COMPASS_ADDRESS);
|
|
Wire.requestFrom(COMPASS_ADDRESS, 6); // request 6 bytes from device
|
|
while(Wire.available())
|
|
{
|
|
buff[i] = Wire.receive(); // receive one byte
|
|
i++;
|
|
}
|
|
Wire.endTransmission(); //end transmission
|
|
|
|
if (i==6) // All bytes received?
|
|
{
|
|
// MSB byte first, then LSB, X,Y,Z
|
|
mag_x = -((((int)buff[0]) << 8) | buff[1]) * calibration[0]; // X axis
|
|
mag_y = ((((int)buff[2]) << 8) | buff[3]) * calibration[1]; // Y axis
|
|
mag_z = -((((int)buff[4]) << 8) | buff[5]) * calibration[2]; // Z axis
|
|
last_update = millis(); // record time of update
|
|
// rotate and offset the magnetometer values
|
|
// XXX this could well be done in common code...
|
|
rot_mag = _orientation_matrix.get() * Vector3f(mag_x,mag_y,mag_z);
|
|
rot_mag = rot_mag + _offset.get();
|
|
mag_x = rot_mag.x;
|
|
mag_y = rot_mag.y;
|
|
mag_z = rot_mag.z;
|
|
}
|
|
}
|
|
|