ardupilot/libraries/AP_HAL_ChibiOS/hwdef/mindpx-v2/hwdef-bl.dat

54 lines
899 B
Plaintext

# hw definition file for processing by chibios_hwdef.py
# for MindPX-v2 hardware bootloader
# MCU class and specific type
MCU STM32F4xx STM32F427xx
define HAL_CHIBIOS_ARCH_MINDPXV2 1
# board ID for firmware load
APJ_BOARD_ID 88
# crystal frequency
OSCILLATOR_HZ 8000000
STM32_ST_USE_TIMER 5
# flash size
FLASH_SIZE_KB 2048
# location of application code
FLASH_BOOTLOADER_LOAD_KB 16
# bootloader loads at start of flash
FLASH_RESERVE_START_KB 0
# order of UARTs (and USB)
SERIAL_ORDER OTG1 USART2
PA9 VBUS INPUT
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
# USART2 serial2 telem1
PD5 USART2_TX USART2
PD6 USART2_RX USART2
PA8 LED_BOOTLOADER OUTPUT
define HAL_LED_ON 1
define HAL_STORAGE_SIZE 16384
# Add CS pins to ensure they are high in bootloader
PB2 GYRO_CS CS
PC15 BARO_CS CS
PD11 ACCEL_MAG_CS CS
PE3 MPU_CS CS
PE12 FRAM_CS CS
PE15 NRF_CS CS