ardupilot/libraries/AP_RangeFinder/AP_RangeFinder_RDS02UF.cpp

126 lines
4.0 KiB
C++

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* RDS02UF Note:
* Sensor range scope 1.5m~20.0m
* Azimuth Coverage ±17°,Elevation Coverage ±3°
* Frame Rate 20Hz
*/
#include "AP_RangeFinder_config.h"
#if AP_RANGEFINDER_RDS02UF_ENABLED
#include "AP_RangeFinder_RDS02UF.h"
#include <AP_HAL/AP_HAL.h>
#define RDS02_HEAD 0x55
#define RDS02_END 0xAA
#define RDS02UF_PRE_DATA_LEN 6
#define RDS02_TARGET_INFO_FC 0x070C
#define RDS02UF_IGNORE_ID_BYTE 0x0F0F
#define RDS02UF_UAV_PRODUCTS_ID 0x03FF
#define RDS02UF_IGNORE_CRC 0xFF
#define RDS02UF_NO_ERR 0x00
bool AP_RangeFinder_RDS02UF::get_reading(float &distance_m)
{
if (uart == nullptr) {
return false;
}
const uint32_t nbytes = uart->read(&u.parse_buffer[body_length],
ARRAY_SIZE(u.parse_buffer)-body_length);
if (nbytes == 0) {
return false;
}
body_length += nbytes;
move_header_in_buffer(0);
// header byte 1 is correct.
if (body_length < ARRAY_SIZE(u.parse_buffer)) {
// need a full buffer to have a valid message...
return false;
}
if (u.packet.headermagic2 != RDS02_HEAD) {
move_header_in_buffer(1);
return false;
}
const uint16_t read_len = u.packet.length_h << 8 | u.packet.length_l;
if (read_len != RDS02UF_DATA_LEN) {
// we can only accept the fixed length message
move_header_in_buffer(1);
return false;
}
// check for the footer signatures:
if (u.packet.footermagic1 != RDS02_END) {
move_header_in_buffer(1);
return false;
}
if (u.packet.footermagic2 != RDS02_END) {
move_header_in_buffer(1);
return false;
}
// calculate checksum
const uint8_t checksum = crc8_rds02uf(&u.parse_buffer[2], RDS02UF_PRE_DATA_LEN + RDS02UF_DATA_LEN);
if (u.packet.checksum != checksum && u.packet.checksum != RDS02UF_IGNORE_CRC) {
move_header_in_buffer(1);
return false;
}
const uint16_t fc_code = (u.packet.fc_high << 8 | u.packet.fc_low);
if (fc_code == RDS02UF_UAV_PRODUCTS_ID && u.packet.error_code == RDS02UF_NO_ERR) {
// get target information
const uint16_t read_info_fc = (u.packet.data[1] << 8 | u.packet.data[0]);
if ((read_info_fc & RDS02UF_IGNORE_ID_BYTE) == RDS02_TARGET_INFO_FC) {
// read_info_fc = 0x70C + ID * 0x10, ID: 0~0xF
distance_m = (u.packet.data[6] * 256 + u.packet.data[5]) * 0.01f;
state.last_reading_ms = AP_HAL::millis();
}
}
// reset buffer
body_length = 0;
return true;
}
// find a RDS02UF message in the buffer, starting at
// initial_offset. If found, that message (or partial message) will
// be moved to the start of the buffer.
void AP_RangeFinder_RDS02UF::move_header_in_buffer(uint8_t initial_offset)
{
uint8_t* header_ptr = (uint8_t*)memchr(&u.parse_buffer[initial_offset], RDS02_HEAD, body_length - initial_offset);
if (header_ptr != nullptr) {
size_t header_offset = header_ptr - &u.parse_buffer[0];
if (header_offset != 0) {
// header was found, but not at index 0; move it back to start of array
memmove(u.parse_buffer, header_ptr, body_length - header_offset);
body_length -= header_offset;
}
} else {
// no header found; reset buffer
body_length = 0;
}
}
#endif // AP_RANGEFINDER_RDS02UF_ENABLED