mirror of https://github.com/ArduPilot/ardupilot
374 lines
8.1 KiB
C++
374 lines
8.1 KiB
C++
/*
|
|
bootloader support functions
|
|
*/
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "hwdef.h"
|
|
#include <AP_HAL_ChibiOS/hwdef/common/usbcfg.h>
|
|
#include <AP_HAL_ChibiOS/hwdef/common/flash.h>
|
|
#include <AP_HAL_ChibiOS/hwdef/common/stm32_util.h>
|
|
#include "support.h"
|
|
#include "mcu_f4.h"
|
|
#include "mcu_f7.h"
|
|
|
|
static BaseChannel *uarts[] = { BOOTLOADER_DEV_LIST };
|
|
#if HAL_USE_SERIAL == TRUE
|
|
static SerialConfig sercfg;
|
|
#endif
|
|
static int8_t locked_uart = -1;
|
|
static uint8_t last_uart;
|
|
|
|
#ifndef BOOTLOADER_BAUDRATE
|
|
#define BOOTLOADER_BAUDRATE 115200
|
|
#endif
|
|
|
|
int16_t cin(unsigned timeout_ms)
|
|
{
|
|
uint8_t b = 0;
|
|
for (uint8_t i=0; i<ARRAY_SIZE(uarts); i++) {
|
|
if (locked_uart == -1 || locked_uart == i) {
|
|
if (chnReadTimeout(uarts[i], &b, 1, chTimeMS2I(timeout_ms)) == 1) {
|
|
last_uart = i;
|
|
return b;
|
|
}
|
|
}
|
|
}
|
|
chThdSleepMicroseconds(500);
|
|
return -1;
|
|
}
|
|
|
|
int cin_word(uint32_t *wp, unsigned timeout_ms)
|
|
{
|
|
for (uint8_t i=0; i<ARRAY_SIZE(uarts); i++) {
|
|
if (locked_uart == -1 || locked_uart == i) {
|
|
if (chnReadTimeout(uarts[i], (uint8_t *)wp, 4, chTimeMS2I(timeout_ms)) == 4) {
|
|
last_uart = i;
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
chThdSleepMicroseconds(500);
|
|
return -1;
|
|
}
|
|
|
|
|
|
void cout(uint8_t *data, uint32_t len)
|
|
{
|
|
chnWriteTimeout(uarts[last_uart], data, len, chTimeMS2I(100));
|
|
}
|
|
|
|
static uint32_t flash_base_page;
|
|
static uint8_t num_pages;
|
|
static const uint8_t *flash_base = (const uint8_t *)(0x08000000 + FLASH_BOOTLOADER_LOAD_KB*1024U);
|
|
|
|
/*
|
|
initialise flash_base_page and num_pages
|
|
*/
|
|
void flash_init(void)
|
|
{
|
|
uint32_t reserved = 0;
|
|
num_pages = stm32_flash_getnumpages();
|
|
while (reserved < FLASH_BOOTLOADER_LOAD_KB * 1024U &&
|
|
flash_base_page < num_pages) {
|
|
reserved += stm32_flash_getpagesize(flash_base_page);
|
|
flash_base_page++;
|
|
}
|
|
}
|
|
|
|
void flash_set_keep_unlocked(bool set)
|
|
{
|
|
stm32_flash_keep_unlocked(set);
|
|
}
|
|
|
|
/*
|
|
read a word at offset relative to FLASH_BOOTLOADER_LOAD_KB
|
|
*/
|
|
uint32_t flash_func_read_word(uint32_t offset)
|
|
{
|
|
return *(const uint32_t *)(flash_base + offset);
|
|
}
|
|
|
|
void flash_func_write_word(uint32_t offset, uint32_t v)
|
|
{
|
|
stm32_flash_write(uint32_t(flash_base+offset), &v, sizeof(v));
|
|
}
|
|
|
|
uint32_t flash_func_sector_size(uint32_t sector)
|
|
{
|
|
if (sector >= num_pages-flash_base_page) {
|
|
return 0;
|
|
}
|
|
return stm32_flash_getpagesize(flash_base_page+sector);
|
|
}
|
|
|
|
void flash_func_erase_sector(uint32_t sector)
|
|
{
|
|
if (!stm32_flash_ispageerased(flash_base_page+sector)) {
|
|
stm32_flash_erasepage(flash_base_page+sector);
|
|
}
|
|
}
|
|
|
|
// read one-time programmable memory
|
|
uint32_t flash_func_read_otp(uint32_t idx)
|
|
{
|
|
if (idx & 3) {
|
|
return 0;
|
|
}
|
|
|
|
if (idx > OTP_SIZE) {
|
|
return 0;
|
|
}
|
|
|
|
return *(uint32_t *)(idx + OTP_BASE);
|
|
}
|
|
|
|
// read chip serial number
|
|
uint32_t flash_func_read_sn(uint32_t idx)
|
|
{
|
|
return *(uint32_t *)(UDID_START + idx);
|
|
}
|
|
|
|
uint32_t get_mcu_id(void)
|
|
{
|
|
return *(uint32_t *)DBGMCU_BASE;
|
|
}
|
|
|
|
#define REVID_MASK 0xFFFF0000
|
|
#define DEVID_MASK 0xFFF
|
|
|
|
uint32_t get_mcu_desc(uint32_t max, uint8_t *revstr)
|
|
{
|
|
uint32_t idcode = (*(uint32_t *)DBGMCU_BASE);
|
|
int32_t mcuid = idcode & DEVID_MASK;
|
|
uint16_t revid = ((idcode & REVID_MASK) >> 16);
|
|
|
|
mcu_des_t des = mcu_descriptions[STM32_UNKNOWN];
|
|
|
|
for (int i = 0; i < ARRAY_SIZE(mcu_descriptions); i++) {
|
|
if (mcuid == mcu_descriptions[i].mcuid) {
|
|
des = mcu_descriptions[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
for (int i = 0; i < ARRAY_SIZE(silicon_revs); i++) {
|
|
if (silicon_revs[i].revid == revid) {
|
|
des.rev = silicon_revs[i].rev;
|
|
}
|
|
}
|
|
|
|
uint8_t *endp = &revstr[max - 1];
|
|
uint8_t *strp = revstr;
|
|
|
|
while (strp < endp && *des.desc) {
|
|
*strp++ = *des.desc++;
|
|
}
|
|
|
|
if (strp < endp) {
|
|
*strp++ = ',';
|
|
}
|
|
|
|
if (strp < endp) {
|
|
*strp++ = des.rev;
|
|
}
|
|
|
|
return strp - revstr;
|
|
}
|
|
|
|
/*
|
|
see if we should limit flash to 1M on devices with older revisions
|
|
*/
|
|
bool check_limit_flash_1M(void)
|
|
{
|
|
uint32_t idcode = (*(uint32_t *)DBGMCU_BASE);
|
|
uint16_t revid = ((idcode & REVID_MASK) >> 16);
|
|
|
|
for (int i = 0; i < ARRAY_SIZE(silicon_revs); i++) {
|
|
if (silicon_revs[i].revid == revid) {
|
|
return silicon_revs[i].limit_flash_size_1M;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void led_on(unsigned led)
|
|
{
|
|
#ifdef HAL_GPIO_PIN_LED_BOOTLOADER
|
|
if (led == LED_BOOTLOADER) {
|
|
palWriteLine(HAL_GPIO_PIN_LED_BOOTLOADER, HAL_LED_ON);
|
|
}
|
|
#endif
|
|
#ifdef HAL_GPIO_PIN_LED_ACTIVITY
|
|
if (led == LED_ACTIVITY) {
|
|
palWriteLine(HAL_GPIO_PIN_LED_ACTIVITY, HAL_LED_ON);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void led_off(unsigned led)
|
|
{
|
|
#ifdef HAL_GPIO_PIN_LED_BOOTLOADER
|
|
if (led == LED_BOOTLOADER) {
|
|
palWriteLine(HAL_GPIO_PIN_LED_BOOTLOADER, !HAL_LED_ON);
|
|
}
|
|
#endif
|
|
#ifdef HAL_GPIO_PIN_LED_ACTIVITY
|
|
if (led == LED_ACTIVITY) {
|
|
palWriteLine(HAL_GPIO_PIN_LED_ACTIVITY, !HAL_LED_ON);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void led_toggle(unsigned led)
|
|
{
|
|
#ifdef HAL_GPIO_PIN_LED_BOOTLOADER
|
|
if (led == LED_BOOTLOADER) {
|
|
palToggleLine(HAL_GPIO_PIN_LED_BOOTLOADER);
|
|
}
|
|
#endif
|
|
#ifdef HAL_GPIO_PIN_LED_ACTIVITY
|
|
if (led == LED_ACTIVITY) {
|
|
palToggleLine(HAL_GPIO_PIN_LED_ACTIVITY);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
extern "C" {
|
|
int vsnprintf(char *str, size_t size, const char *fmt, va_list ap);
|
|
}
|
|
|
|
// printf to USB for debugging
|
|
void uprintf(const char *fmt, ...)
|
|
{
|
|
#if HAL_USE_SERIAL_USB == TRUE
|
|
char msg[200];
|
|
va_list ap;
|
|
va_start(ap, fmt);
|
|
uint32_t n = vsnprintf(msg, sizeof(msg), fmt, ap);
|
|
va_end(ap);
|
|
chnWriteTimeout(&SDU1, (const uint8_t *)msg, n, chTimeMS2I(100));
|
|
#endif
|
|
}
|
|
|
|
// generate a pulse sequence forever, for debugging
|
|
void led_pulses(uint8_t npulses)
|
|
{
|
|
led_off(LED_BOOTLOADER);
|
|
while (true) {
|
|
for (uint8_t i=0; i<npulses; i++) {
|
|
led_on(LED_BOOTLOADER);
|
|
chThdSleepMilliseconds(200);
|
|
led_off(LED_BOOTLOADER);
|
|
chThdSleepMilliseconds(200);
|
|
}
|
|
chThdSleepMilliseconds(2000);
|
|
}
|
|
}
|
|
|
|
//simple variant of std c function to reduce used flash space
|
|
void *memcpy(void *dest, const void *src, size_t n)
|
|
{
|
|
uint8_t *tdest = (uint8_t *)dest;
|
|
uint8_t *tsrc = (uint8_t *)src;
|
|
for (int i=0; i<n; i++) {
|
|
tdest[i] = tsrc[i];
|
|
}
|
|
return dest;
|
|
}
|
|
|
|
//simple variant of std c function to reduce used flash space
|
|
int strncmp(const char *s1, const char *s2, size_t n)
|
|
{
|
|
while ((*s1 != 0) && (*s1 == *s2) && n--) {
|
|
s1++;
|
|
s2++;
|
|
}
|
|
if (n == 0) {
|
|
return 0;
|
|
}
|
|
return (*s1 - *s2);
|
|
}
|
|
|
|
//simple variant of std c function to reduce used flash space
|
|
int strcmp(const char *s1, const char *s2)
|
|
{
|
|
while ((*s1 != 0) && (*s1 == *s2)) {
|
|
s1++;
|
|
s2++;
|
|
}
|
|
return (*s1 - *s2);
|
|
}
|
|
|
|
//simple variant of std c function to reduce used flash space
|
|
size_t strlen(const char *s1)
|
|
{
|
|
size_t ret = 0;
|
|
while (*s1++) ret++;
|
|
return ret;
|
|
}
|
|
|
|
//simple variant of std c function to reduce used flash space
|
|
void *memset(void *s, int c, size_t n)
|
|
{
|
|
uint8_t *b = (uint8_t *)s;
|
|
while (n--) {
|
|
*b++ = c;
|
|
}
|
|
return s;
|
|
}
|
|
|
|
void lock_bl_port(void)
|
|
{
|
|
locked_uart = last_uart;
|
|
}
|
|
|
|
/*
|
|
initialise serial ports
|
|
*/
|
|
void init_uarts(void)
|
|
{
|
|
#if HAL_USE_SERIAL_USB == TRUE
|
|
sduObjectInit(&SDU1);
|
|
sduStart(&SDU1, &serusbcfg);
|
|
|
|
usbDisconnectBus(serusbcfg.usbp);
|
|
chThdSleepMilliseconds(1000);
|
|
usbStart(serusbcfg.usbp, &usbcfg);
|
|
usbConnectBus(serusbcfg.usbp);
|
|
#endif
|
|
|
|
#if HAL_USE_SERIAL == TRUE
|
|
sercfg.speed = BOOTLOADER_BAUDRATE;
|
|
|
|
for (uint8_t i=0; i<ARRAY_SIZE(uarts); i++) {
|
|
#if HAL_USE_SERIAL_USB == TRUE
|
|
if (uarts[i] == (BaseChannel *)&SDU1) {
|
|
continue;
|
|
}
|
|
#endif
|
|
sdStart((SerialDriver *)uarts[i], &sercfg);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
|
|
/*
|
|
set baudrate on the current port
|
|
*/
|
|
void port_setbaud(uint32_t baudrate)
|
|
{
|
|
#if HAL_USE_SERIAL_USB == TRUE
|
|
if (uarts[last_uart] == (BaseChannel *)&SDU1) {
|
|
// can't set baudrate on USB
|
|
return;
|
|
}
|
|
#endif
|
|
#if HAL_USE_SERIAL == TRUE
|
|
memset(&sercfg, 0, sizeof(sercfg));
|
|
sercfg.speed = baudrate;
|
|
sdStart((SerialDriver *)uarts[last_uart], &sercfg);
|
|
#endif
|
|
}
|