ardupilot/libraries/AP_Mount/AP_Mount_SToRM32_serial.h

158 lines
3.7 KiB
C++

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
SToRM32 mount using serial protocol backend class
*/
#ifndef __AP_MOUNT_STORM32_SERIAL_H__
#define __AP_MOUNT_STORM32_SERIAL_H__
#include <AP_HAL/AP_HAL.h>
#include <AP_AHRS/AP_AHRS.h>
#include <AP_Math/AP_Math.h>
#include <AP_Common/AP_Common.h>
#include <AP_GPS/AP_GPS.h>
#include <GCS_MAVLink/GCS_MAVLink.h>
#include <RC_Channel/RC_Channel.h>
#include "AP_Mount_Backend.h"
#define AP_MOUNT_STORM32_SERIAL_RESEND_MS 1000 // resend angle targets to gimbal once per second
class AP_Mount_SToRM32_serial : public AP_Mount_Backend
{
public:
// Constructor
AP_Mount_SToRM32_serial(AP_Mount &frontend, AP_Mount::mount_state &state, uint8_t instance);
// init - performs any required initialisation for this instance
virtual void init(const AP_SerialManager& serial_manager);
// update mount position - should be called periodically
virtual void update();
// has_pan_control - returns true if this mount can control it's pan (required for multicopters)
virtual bool has_pan_control() const;
// set_mode - sets mount's mode
virtual void set_mode(enum MAV_MOUNT_MODE mode);
// status_msg - called to allow mounts to send their status to GCS using the MOUNT_STATUS message
virtual void status_msg(mavlink_channel_t chan);
private:
// send_target_angles
void send_target_angles(float pitch_deg, float roll_deg, float yaw_deg);
// send read data request
void get_angles();
// read_incoming
void read_incoming();
void parse_reply();
enum ReplyType {
ReplyType_UNKNOWN = 0,
ReplyType_DATA,
ReplyType_ACK
};
//void add_next_reply(ReplyType reply_type);
uint8_t get_reply_size(ReplyType reply_type);
bool can_send(bool with_control);
struct PACKED SToRM32_reply_data_struct {
uint16_t state;
uint16_t status;
uint16_t status2;
uint16_t i2c_errors;
uint16_t lipo_voltage;
uint16_t systicks;
uint16_t cycle_time;
int16_t imu1_gx;
int16_t imu1_gy;
int16_t imu1_gz;
int16_t imu1_ax;
int16_t imu1_ay;
int16_t imu1_az;
int16_t ahrs_x;
int16_t ahrs_y;
int16_t ahrs_z;
int16_t imu1_pitch;
int16_t imu1_roll;
int16_t imu1_yaw;
int16_t cpid_pitch;
int16_t cpid_roll;
int16_t cpid_yaw;
uint16_t input_pitch;
uint16_t input_roll;
uint16_t input_yaw;
int16_t imu2_pitch;
int16_t imu2_roll;
int16_t imu2_yaw;
int16_t mag2_yaw;
int16_t mag2_pitch;
int16_t ahrs_imu_confidence;
uint16_t function_input_values;
uint16_t crc;
uint8_t magic;
};
struct PACKED SToRM32_reply_ack_struct {
uint8_t byte1;
uint8_t byte2;
uint8_t byte3;
uint8_t data;
uint16_t crc;
};
struct PACKED cmd_set_angles_struct {
uint8_t byte1;
uint8_t byte2;
uint8_t byte3;
float pitch;
float roll;
float yaw;
uint8_t flags;
uint8_t type;
uint16_t crc;
};
// internal variables
AP_HAL::UARTDriver *_port;
bool _initialised; // true once the driver has been initialised
uint32_t _last_send; // system time of last do_mount_control sent to gimbal
uint8_t _reply_length;
uint8_t _reply_counter;
ReplyType _reply_type;
union PACKED SToRM32_reply {
SToRM32_reply_data_struct data;
SToRM32_reply_ack_struct ack;
uint8_t bytes[];
} _buffer;
// keep the last _current_angle values
Vector3l _current_angle;
};
#endif // __AP_MOUNT_STORM32_SERIAL_H__