ardupilot/libraries/AP_Mission/AP_Mission.h

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-

/// @file    AP_Mission.h
/// @brief   Handles the MAVLINK command mission stack.  Reads and writes mission to storage.

/*
 *   The AP_Mission library:
 *   - responsible for managing a list of commands made up of "nav", "do" and "conditional" commands
 *   - reads and writes the mission commands to storage.
 *   - provides easy acces to current, previous and upcoming waypoints
 *   - calls main program's command execution and verify functions.
 *   - accounts for the DO_JUMP command
 *
 */
#ifndef AP_Mission_h
#define AP_Mission_h

#include <GCS_MAVLink.h>
#include <AP_Math.h>
#include <AP_Common.h>
#include <AP_Param.h>
#include <AP_AHRS.h>
#include <AP_HAL.h>
#include <../StorageManager/StorageManager.h>

// definitions
#define AP_MISSION_EEPROM_VERSION           0x65AE  // version number stored in first four bytes of eeprom.  increment this by one when eeprom format is changed
#define AP_MISSION_EEPROM_COMMAND_SIZE      15      // size in bytes of all mission commands

#if HAL_CPU_CLASS < HAL_CPU_CLASS_75
 # define AP_MISSION_MAX_NUM_DO_JUMP_COMMANDS 3     // allow up to 3 do-jump commands (due to RAM limitations) on the APM2
#else
 # define AP_MISSION_MAX_NUM_DO_JUMP_COMMANDS 15    // allow up to 15 do-jump commands all high speed CPUs
#endif

#define AP_MISSION_JUMP_REPEAT_FOREVER      -1      // when do-jump command's repeat count is -1 this means endless repeat

#define AP_MISSION_CMD_ID_NONE              0       // mavlink cmd id of zero means invalid or missing command
#define AP_MISSION_CMD_INDEX_NONE           65535   // command index of 65535 means invalid or missing command
#define AP_MISSION_JUMP_TIMES_MAX           32767   // maximum number of times a jump can be executed.  Used when jump tracking fails (i.e. when too many jumps in mission)

#define AP_MISSION_FIRST_REAL_COMMAND       1       // command #0 reserved to hold home position

#define AP_MISSION_RESTART_DEFAULT          0       // resume the mission from the last command run by default

/// @class    AP_Mission
/// @brief    Object managing Mission
class AP_Mission {

public:
    // jump command structure
    struct PACKED Jump_Command {
        uint16_t target;        // target command id
        int16_t num_times;      // num times to repeat.  -1 = repeat forever
    };

    // condition delay command structure
    struct PACKED Conditional_Delay_Command {
        float seconds;          // period of delay in seconds
    };

    // condition delay command structure
    struct PACKED Conditional_Distance_Command {
        float meters;           // distance from next waypoint in meters
    };

    // condition yaw command structure
    struct PACKED Yaw_Command {
        float angle_deg;        // target angle in degrees (0=north, 90=east)
        float turn_rate_dps;    // turn rate in degrees / second (0=use default)
        int8_t direction;       // -1 = ccw, +1 = cw
        uint8_t relative_angle; // 0 = absolute angle, 1 = relative angle
    };

    // change speed command structure
    struct PACKED Change_Speed_Command {
        uint8_t speed_type;     // 0=airspeed, 1=ground speed
        float target_ms;        // target speed in m/s, -1 means no change
        float throttle_pct;     // throttle as a percentage (i.e. 0 ~ 100), -1 means no change
    };

    // set relay command structure
    struct PACKED Set_Relay_Command {
        uint8_t num;            // relay number from 1 to 4
        uint8_t state;          // on = 3.3V or 5V (depending upon board), off = 0V.  only used for do-set-relay, not for do-repeat-relay
    };

    // repeat relay command structure
    struct PACKED Repeat_Relay_Command {
        uint8_t num;            // relay number from 1 to 4
        int16_t repeat_count;   // number of times to trigger the relay
        float cycle_time;       // cycle time in seconds (the time between peaks or the time the relay is on and off for each cycle?)
    };

    // set servo command structure
    struct PACKED Set_Servo_Command {
        uint8_t channel;        // servo channel
        uint16_t pwm;           // pwm value for servo
    };

    // repeat servo command structure
    struct PACKED Repeat_Servo_Command {
        uint8_t channel;        // servo channel
        uint16_t pwm;           // pwm value for servo
        int16_t repeat_count;   // number of times to move the servo (returns to trim in between)
        float cycle_time;       // cycle time in seconds (the time between peaks or the time the servo is at the specified pwm value for each cycle?)
    };

    // set cam trigger distance command structure
    struct PACKED Cam_Trigg_Distance {
        float meters;           // distance
    };

    // gripper command structure
    struct PACKED Gripper_Command {
        uint8_t num;            // gripper number
        uint8_t action;         // action (0 = release, 1 = grab)
    };

    // nav guided command
    struct PACKED Guided_Limits_Command {
        // max time is held in p1 field
        float alt_min;          // min alt below which the command will be aborted.  0 for no lower alt limit
        float alt_max;          // max alt above which the command will be aborted.  0 for no upper alt limit
        float horiz_max;        // max horizontal distance the vehicle can move before the command will be aborted.  0 for no horizontal limit
    };

    union PACKED Content {
        // jump structure
        Jump_Command jump;

        // conditional delay
        Conditional_Delay_Command delay;

        // conditional distance
        Conditional_Distance_Command distance;

        // conditional yaw
        Yaw_Command yaw;

        // change speed
        Change_Speed_Command speed;

        // do-set-relay
        Set_Relay_Command relay;

        // do-repeat-relay
        Repeat_Relay_Command repeat_relay;

        // do-set-servo
        Set_Servo_Command servo;

        // do-repeate-servo
        Repeat_Servo_Command repeat_servo;

        // cam trigg distance
        Cam_Trigg_Distance cam_trigg_dist;

        // do-gripper
        Gripper_Command gripper;

        // do-guided-limits
        Guided_Limits_Command guided_limits;

        // location
        Location location;      // Waypoint location

        // raw bytes, for reading/writing to eeprom
        uint8_t bytes[12];
    };

    // command structure
    struct PACKED Mission_Command {
        uint16_t index;             // this commands position in the command list
        uint8_t id;                 // mavlink command id
        uint16_t p1;                // general purpose parameter 1
        Content content;
    };

    // main program function pointers
    typedef bool (*mission_cmd_fn_t)(const Mission_Command& cmd);
    typedef void (*mission_complete_fn_t)(void);

    // mission state enumeration
    enum mission_state {
        MISSION_STOPPED=0,
        MISSION_RUNNING=1,
        MISSION_COMPLETE=2
    };

    /// constructor
    AP_Mission(AP_AHRS &ahrs, mission_cmd_fn_t cmd_start_fn, mission_cmd_fn_t cmd_verify_fn, mission_complete_fn_t mission_complete_fn) :
        _ahrs(ahrs),
        _cmd_start_fn(cmd_start_fn),
        _cmd_verify_fn(cmd_verify_fn),
        _mission_complete_fn(mission_complete_fn),
        _prev_nav_cmd_index(AP_MISSION_CMD_INDEX_NONE),
        _last_change_time_ms(0)
    {
        // load parameter defaults
        AP_Param::setup_object_defaults(this, var_info);

        // clear commands
        _nav_cmd.index = AP_MISSION_CMD_INDEX_NONE;
        _do_cmd.index = AP_MISSION_CMD_INDEX_NONE;

        // initialise other internal variables
        _flags.state = MISSION_STOPPED;
        _flags.nav_cmd_loaded = false;
        _flags.do_cmd_loaded = false;
    }

    ///
    /// public mission methods
    ///

    /// init - initialises this library including checks the version in eeprom matches this library
    void init();

    /// status - returns the status of the mission (i.e. Mission_Started, Mission_Complete, Mission_Stopped
    mission_state state() const { return _flags.state; }

    /// num_commands - returns total number of commands in the mission
    uint16_t num_commands() const { return _cmd_total; }

    /// num_commands_max - returns maximum number of commands that can be stored
    uint16_t num_commands_max() const;

    /// start - resets current commands to point to the beginning of the mission
    ///     To-Do: should we validate the mission first and return true/false?
    void start();

    /// stop - stops mission execution.  subsequent calls to update() will have no effect until the mission is started or resumed
    void stop();

    /// resume - continues the mission execution from where we last left off
    ///     previous running commands will be re-initialised
    void resume();

    /// start_or_resume - if MIS_AUTORESTART=0 this will call resume(), otherwise it will call start()
    void start_or_resume();

    /// reset - reset mission to the first command
    void reset();

    /// clear - clears out mission
    ///     returns true if mission was running so it could not be cleared
    bool clear();

    /// truncate - truncate any mission items beyond given index
    void truncate(uint16_t index);

    /// update - ensures the command queues are loaded with the next command and calls main programs command_init and command_verify functions to progress the mission
    ///     should be called at 10hz or higher
    void update();

    ///
    /// public command methods
    ///

    /// add_cmd - adds a command to the end of the command list and writes to storage
    ///     returns true if successfully added, false on failure
    ///     cmd.index is updated with it's new position in the mission
    bool add_cmd(Mission_Command& cmd);

    /// replace_cmd - replaces the command at position 'index' in the command list with the provided cmd
    ///     replacing the current active command will have no effect until the command is restarted
    ///     returns true if successfully replaced, false on failure
    bool replace_cmd(uint16_t index, Mission_Command& cmd);

    /// is_nav_cmd - returns true if the command's id is a "navigation" command, false if "do" or "conditional" command
    static bool is_nav_cmd(const Mission_Command& cmd);

    /// get_current_nav_cmd - returns the current "navigation" command
    const Mission_Command& get_current_nav_cmd() const { return _nav_cmd; }

    /// get_current_nav_index - returns the current "navigation" command index
    /// Note that this will return 0 if there is no command. This is
    /// used in MAVLink reporting of the mission command
    uint16_t get_current_nav_index() const { 
        return _nav_cmd.index==AP_MISSION_CMD_INDEX_NONE?0:_nav_cmd.index; }

    /// get_prev_nav_cmd_index - returns the previous "navigation" commands index (i.e. position in the mission command list)
    ///     if there was no previous nav command it returns AP_MISSION_CMD_INDEX_NONE
    ///     we do not return the entire command to save on RAM
    uint16_t get_prev_nav_cmd_index() const { return _prev_nav_cmd_index; }

    /// get_next_nav_cmd - gets next "navigation" command found at or after start_index
    ///     returns true if found, false if not found (i.e. reached end of mission command list)
    ///     accounts for do_jump commands
    bool get_next_nav_cmd(uint16_t start_index, Mission_Command& cmd);

    /// get the ground course of the next navigation leg in centidegrees
    /// from 0 36000. Return default_angle if next navigation
    /// leg cannot be determined
    int32_t get_next_ground_course_cd(int32_t default_angle);

    /// get_current_do_cmd - returns active "do" command
    const Mission_Command& get_current_do_cmd() const { return _do_cmd; }

    // set_current_cmd - jumps to command specified by index
    bool set_current_cmd(uint16_t index);

    /// load_cmd_from_storage - load command from storage
    ///     true is return if successful
    bool read_cmd_from_storage(uint16_t index, Mission_Command& cmd) const;

    /// write_cmd_to_storage - write a command to storage
    ///     cmd.index is used to calculate the storage location
    ///     true is returned if successful
    bool write_cmd_to_storage(uint16_t index, Mission_Command& cmd);

    /// write_home_to_storage - writes the special purpose cmd 0 (home) to storage
    ///     home is taken directly from ahrs
    void write_home_to_storage();

    // mavlink_to_mission_cmd - converts mavlink message to an AP_Mission::Mission_Command object which can be stored to eeprom
    //  return true on success, false on failure
    static bool mavlink_to_mission_cmd(const mavlink_mission_item_t& packet, AP_Mission::Mission_Command& cmd);

    // mission_cmd_to_mavlink - converts an AP_Mission::Mission_Command object to a mavlink message which can be sent to the GCS
    //  return true on success, false on failure
    static bool mission_cmd_to_mavlink(const AP_Mission::Mission_Command& cmd, mavlink_mission_item_t& packet);

    // return the last time the mission changed in milliseconds
    uint32_t last_change_time_ms(void) const { return _last_change_time_ms; }

    // find the nearest landing sequence starting point (DO_LAND_START) and
    // return its index.  Returns 0 if no appropriate DO_LAND_START point can
    // be found.
    uint16_t get_landing_sequence_start();

    // user settable parameters
    static const struct AP_Param::GroupInfo var_info[];

private:
    static StorageAccess _storage;

    struct Mission_Flags {
        mission_state state;
        uint8_t nav_cmd_loaded  : 1; // true if a "navigation" command has been loaded into _nav_cmd
        uint8_t do_cmd_loaded   : 1; // true if a "do"/"conditional" command has been loaded into _do_cmd
        uint8_t do_cmd_all_done : 1; // true if all "do"/"conditional" commands have been completed (stops unnecessary searching through eeprom for do commands)
    } _flags;

    ///
    /// private methods
    ///

    /// complete - mission is marked complete and clean-up performed including calling the mission_complete_fn
    void complete();

    /// advance_current_nav_cmd - moves current nav command forward
    ///     do command will also be loaded
    ///     accounts for do-jump commands
    //      returns true if command is advanced, false if failed (i.e. mission completed)
    bool advance_current_nav_cmd();

    /// advance_current_do_cmd - moves current do command forward
    ///     accounts for do-jump commands
    ///     returns true if successfully advanced (can it ever be unsuccessful?)
    void advance_current_do_cmd();

    /// get_next_cmd - gets next command found at or after start_index
    ///     returns true if found, false if not found (i.e. mission complete)
    ///     accounts for do_jump commands
    ///     increment_jump_num_times_if_found should be set to true if advancing the active navigation command
    bool get_next_cmd(uint16_t start_index, Mission_Command& cmd, bool increment_jump_num_times_if_found);

    /// get_next_do_cmd - gets next "do" or "conditional" command after start_index
    ///     returns true if found, false if not found
    ///     stops and returns false if it hits another navigation command before it finds the first do or conditional command
    ///     accounts for do_jump commands but never increments the jump's num_times_run (get_next_nav_cmd is responsible for this)
    bool get_next_do_cmd(uint16_t start_index, Mission_Command& cmd);

    ///
    /// jump handling methods
    ///
    // init_jump_tracking - initialise jump_tracking variables
    void init_jump_tracking();

    /// get_jump_times_run - returns number of times the jump command has been run
    ///     return is signed to be consistent with do-jump cmd's repeat count which can be -1 (to signify to repeat forever)
    int16_t get_jump_times_run(const Mission_Command& cmd);

    /// increment_jump_times_run - increments the recorded number of times the jump command has been run
    void increment_jump_times_run(Mission_Command& cmd);

    /// check_eeprom_version - checks version of missions stored in eeprom matches this library
    /// command list will be cleared if they do not match
    void check_eeprom_version();

    // references to external libraries
    const AP_AHRS&   _ahrs;      // used only for home position

    // parameters
    AP_Int16                _cmd_total;  // total number of commands in the mission
    AP_Int8                 _restart;   // controls mission starting point when entering Auto mode (either restart from beginning of mission or resume from last command run)

    // pointer to main program functions
    mission_cmd_fn_t        _cmd_start_fn;  // pointer to function which will be called when a new command is started
    mission_cmd_fn_t        _cmd_verify_fn; // pointer to function which will be called repeatedly to ensure a command is progressing
    mission_complete_fn_t   _mission_complete_fn;   // pointer to function which will be called when mission completes

    // internal variables
    struct Mission_Command  _nav_cmd;   // current "navigation" command.  It's position in the command list is held in _nav_cmd.index
    struct Mission_Command  _do_cmd;    // current "do" command.  It's position in the command list is held in _do_cmd.index
    uint16_t                _prev_nav_cmd_index;    // index of the previous "navigation" command.  Rarely used which is why we don't store the whole command

    // jump related variables
    struct jump_tracking_struct {
        uint16_t index;                 // index of do-jump commands in mission
        int16_t num_times_run;          // number of times this jump command has been run
    } _jump_tracking[AP_MISSION_MAX_NUM_DO_JUMP_COMMANDS];

    // last time that mission changed
    uint32_t _last_change_time_ms;
};

#endif