mirror of https://github.com/ArduPilot/ardupilot
232 lines
7.5 KiB
Plaintext
232 lines
7.5 KiB
Plaintext
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
|
|
|
|
//Function that will read the radio data, limit servos and trigger a failsafe
|
|
// ----------------------------------------------------------------------------
|
|
static byte failsafeCounter = 0; // we wait a second to take over the throttle and send the plane circling
|
|
|
|
|
|
static void init_rc_in()
|
|
{
|
|
// set rc reversing
|
|
update_servo_switches();
|
|
|
|
// set rc channel ranges
|
|
g.channel_roll.set_angle(SERVO_MAX);
|
|
g.channel_pitch.set_angle(SERVO_MAX);
|
|
g.channel_rudder.set_angle(SERVO_MAX);
|
|
g.channel_throttle.set_range(0, 100);
|
|
|
|
// set rc dead zones
|
|
g.channel_roll.dead_zone = 60;
|
|
g.channel_pitch.dead_zone = 60;
|
|
g.channel_rudder.dead_zone = 60;
|
|
g.channel_throttle.dead_zone = 6;
|
|
|
|
//set auxiliary ranges
|
|
if (g.rc_5_funct == RC_5_FUNCT_AILERON) {
|
|
g.rc_5.set_angle(SERVO_MAX);
|
|
} else if (g.rc_5_funct == RC_5_FUNCT_FLAP_AUTO || g.rc_5_funct == RC_5_FUNCT_FLAPERON) {
|
|
g.rc_5.set_range(0,100);
|
|
} else {
|
|
g.rc_5.set_range(0,1000); // Insert proper init for camera mount, etc., here
|
|
}
|
|
|
|
if (g.rc_6_funct == RC_6_FUNCT_AILERON) {
|
|
g.rc_6.set_angle(SERVO_MAX);
|
|
} else if (g.rc_6_funct == RC_6_FUNCT_FLAP_AUTO || g.rc_6_funct == RC_6_FUNCT_FLAPERON) {
|
|
g.rc_6.set_range(0,100);
|
|
} else {
|
|
g.rc_6.set_range(0,1000); // Insert proper init for camera mount, etc., here
|
|
}
|
|
|
|
g.rc_7.set_range(0,1000); // Insert proper init for camera mount, etc., here
|
|
g.rc_8.set_range(0,1000);
|
|
}
|
|
|
|
static void init_rc_out()
|
|
{
|
|
APM_RC.OutputCh(CH_1, g.channel_roll.radio_trim); // Initialization of servo outputs
|
|
APM_RC.OutputCh(CH_2, g.channel_pitch.radio_trim);
|
|
APM_RC.OutputCh(CH_3, g.channel_throttle.radio_min);
|
|
APM_RC.OutputCh(CH_4, g.channel_rudder.radio_trim);
|
|
|
|
APM_RC.OutputCh(CH_5, g.rc_5.radio_trim);
|
|
APM_RC.OutputCh(CH_6, g.rc_6.radio_trim);
|
|
APM_RC.OutputCh(CH_7, g.rc_7.radio_trim);
|
|
APM_RC.OutputCh(CH_8, g.rc_8.radio_trim);
|
|
|
|
APM_RC.Init(); // APM Radio initialization
|
|
|
|
APM_RC.OutputCh(CH_1, g.channel_roll.radio_trim); // Initialization of servo outputs
|
|
APM_RC.OutputCh(CH_2, g.channel_pitch.radio_trim);
|
|
APM_RC.OutputCh(CH_3, g.channel_throttle.radio_min);
|
|
APM_RC.OutputCh(CH_4, g.channel_rudder.radio_trim);
|
|
|
|
APM_RC.OutputCh(CH_5, g.rc_5.radio_trim);
|
|
APM_RC.OutputCh(CH_6, g.rc_6.radio_trim);
|
|
APM_RC.OutputCh(CH_7, g.rc_7.radio_trim);
|
|
APM_RC.OutputCh(CH_8, g.rc_8.radio_trim);
|
|
}
|
|
|
|
static void read_radio()
|
|
{
|
|
ch1_temp = APM_RC.InputCh(CH_ROLL);
|
|
ch2_temp = APM_RC.InputCh(CH_PITCH);
|
|
|
|
if(g.mix_mode == 0){
|
|
g.channel_roll.set_pwm(ch1_temp);
|
|
g.channel_pitch.set_pwm(ch2_temp);
|
|
}else{
|
|
g.channel_roll.set_pwm(BOOL_TO_SIGN(g.reverse_elevons) * (BOOL_TO_SIGN(g.reverse_ch2_elevon) * int(ch2_temp - elevon2_trim) - BOOL_TO_SIGN(g.reverse_ch1_elevon) * int(ch1_temp - elevon1_trim)) / 2 + 1500);
|
|
g.channel_pitch.set_pwm((BOOL_TO_SIGN(g.reverse_ch2_elevon) * int(ch2_temp - elevon2_trim) + BOOL_TO_SIGN(g.reverse_ch1_elevon) * int(ch1_temp - elevon1_trim)) / 2 + 1500);
|
|
}
|
|
|
|
g.channel_throttle.set_pwm(APM_RC.InputCh(CH_3));
|
|
g.channel_rudder.set_pwm(APM_RC.InputCh(CH_4));
|
|
g.rc_5.set_pwm(APM_RC.InputCh(CH_5));
|
|
g.rc_6.set_pwm(APM_RC.InputCh(CH_6));
|
|
g.rc_7.set_pwm(APM_RC.InputCh(CH_7));
|
|
g.rc_8.set_pwm(APM_RC.InputCh(CH_8));
|
|
|
|
// TO DO - go through and patch throttle reverse for RC_Channel library compatibility
|
|
#if THROTTLE_REVERSE == 1
|
|
radio_in[CH_THROTTLE] = radio_max(CH_THROTTLE) + radio_min(CH_THROTTLE) - radio_in[CH_THROTTLE];
|
|
#endif
|
|
|
|
control_failsafe(g.channel_throttle.radio_in);
|
|
|
|
g.channel_throttle.servo_out = g.channel_throttle.control_in;
|
|
|
|
if (g.channel_throttle.servo_out > 50) {
|
|
if(g.airspeed_enabled == true) {
|
|
airspeed_nudge = (g.flybywire_airspeed_max * 100 - g.airspeed_cruise) * ((g.channel_throttle.norm_input()-0.5) / 0.5);
|
|
} else {
|
|
throttle_nudge = (g.throttle_max - g.throttle_cruise) * ((g.channel_throttle.norm_input()-0.5) / 0.5);
|
|
}
|
|
} else {
|
|
airspeed_nudge = 0;
|
|
throttle_nudge = 0;
|
|
}
|
|
|
|
/*
|
|
Serial.printf_P(PSTR("OUT 1: %d\t2: %d\t3: %d\t4: %d \n"),
|
|
g.rc_1.control_in,
|
|
g.rc_2.control_in,
|
|
g.rc_3.control_in,
|
|
g.rc_4.control_in);
|
|
*/
|
|
}
|
|
|
|
static void control_failsafe(uint16_t pwm)
|
|
{
|
|
if(g.throttle_fs_enabled == 0)
|
|
return;
|
|
|
|
// Check for failsafe condition based on loss of GCS control
|
|
if (rc_override_active) {
|
|
if(millis() - rc_override_fs_timer > FAILSAFE_SHORT_TIME) {
|
|
ch3_failsafe = true;
|
|
} else {
|
|
ch3_failsafe = false;
|
|
}
|
|
|
|
//Check for failsafe and debounce funky reads
|
|
} else if (g.throttle_fs_enabled) {
|
|
if (pwm < (unsigned)g.throttle_fs_value){
|
|
// we detect a failsafe from radio
|
|
// throttle has dropped below the mark
|
|
failsafeCounter++;
|
|
if (failsafeCounter == 9){
|
|
SendDebug_P("MSG FS ON ");
|
|
SendDebugln(pwm, DEC);
|
|
}else if(failsafeCounter == 10) {
|
|
ch3_failsafe = true;
|
|
}else if (failsafeCounter > 10){
|
|
failsafeCounter = 11;
|
|
}
|
|
|
|
}else if(failsafeCounter > 0){
|
|
// we are no longer in failsafe condition
|
|
// but we need to recover quickly
|
|
failsafeCounter--;
|
|
if (failsafeCounter > 3){
|
|
failsafeCounter = 3;
|
|
}
|
|
if (failsafeCounter == 1){
|
|
SendDebug_P("MSG FS OFF ");
|
|
SendDebugln(pwm, DEC);
|
|
}else if(failsafeCounter == 0) {
|
|
ch3_failsafe = false;
|
|
}else if (failsafeCounter <0){
|
|
failsafeCounter = -1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void trim_control_surfaces()
|
|
{
|
|
read_radio();
|
|
// Store control surface trim values
|
|
// ---------------------------------
|
|
if(g.mix_mode == 0){
|
|
g.channel_roll.radio_trim = g.channel_roll.radio_in;
|
|
g.channel_pitch.radio_trim = g.channel_pitch.radio_in;
|
|
g.channel_rudder.radio_trim = g.channel_rudder.radio_in;
|
|
if (g.rc_5_funct == RC_5_FUNCT_AILERON) g.rc_5.radio_trim = g.rc_5.radio_in; // Second aileron channel
|
|
if (g.rc_6_funct == RC_6_FUNCT_AILERON) g.rc_6.radio_trim = g.rc_6.radio_in; // Second aileron channel
|
|
|
|
}else{
|
|
elevon1_trim = ch1_temp;
|
|
elevon2_trim = ch2_temp;
|
|
//Recompute values here using new values for elevon1_trim and elevon2_trim
|
|
//We cannot use radio_in[CH_ROLL] and radio_in[CH_PITCH] values from read_radio() because the elevon trim values have changed
|
|
uint16_t center = 1500;
|
|
g.channel_roll.radio_trim = center;
|
|
g.channel_pitch.radio_trim = center;
|
|
}
|
|
|
|
// save to eeprom
|
|
g.channel_roll.save_eeprom();
|
|
g.channel_pitch.save_eeprom();
|
|
g.channel_throttle.save_eeprom();
|
|
g.channel_rudder.save_eeprom();
|
|
if (g.rc_5_funct == RC_5_FUNCT_AILERON) g.rc_5.save_eeprom();
|
|
if (g.rc_6_funct == RC_6_FUNCT_AILERON) g.rc_6.save_eeprom();
|
|
}
|
|
|
|
static void trim_radio()
|
|
{
|
|
for (int y = 0; y < 30; y++) {
|
|
read_radio();
|
|
}
|
|
|
|
// Store the trim values
|
|
// ---------------------
|
|
if(g.mix_mode == 0){
|
|
g.channel_roll.radio_trim = g.channel_roll.radio_in;
|
|
g.channel_pitch.radio_trim = g.channel_pitch.radio_in;
|
|
//g.channel_throttle.radio_trim = g.channel_throttle.radio_in;
|
|
g.channel_rudder.radio_trim = g.channel_rudder.radio_in;
|
|
if (g.rc_5_funct == RC_5_FUNCT_AILERON) g.rc_5.radio_trim = g.rc_5.radio_in; // Second aileron channel
|
|
if (g.rc_6_funct == RC_6_FUNCT_AILERON) g.rc_6.radio_trim = g.rc_6.radio_in; // Second aileron channel
|
|
|
|
} else {
|
|
elevon1_trim = ch1_temp;
|
|
elevon2_trim = ch2_temp;
|
|
uint16_t center = 1500;
|
|
g.channel_roll.radio_trim = center;
|
|
g.channel_pitch.radio_trim = center;
|
|
g.channel_rudder.radio_trim = g.channel_rudder.radio_in;
|
|
}
|
|
|
|
// save to eeprom
|
|
g.channel_roll.save_eeprom();
|
|
g.channel_pitch.save_eeprom();
|
|
//g.channel_throttle.save_eeprom();
|
|
g.channel_rudder.save_eeprom();
|
|
if (g.rc_5_funct == RC_5_FUNCT_AILERON) g.rc_5.save_eeprom();
|
|
if (g.rc_6_funct == RC_6_FUNCT_AILERON) g.rc_6.save_eeprom();
|
|
}
|
|
|