mirror of
https://github.com/ArduPilot/ardupilot
synced 2025-02-28 18:53:57 -04:00
244 lines
8.5 KiB
C++
244 lines
8.5 KiB
C++
/*
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
// Code by Jon Challinger
|
|
// Modified by Paul Riseborough
|
|
//
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
|
#include "AP_RollController.h"
|
|
#include <AP_AHRS/AP_AHRS.h>
|
|
#include <AP_Scheduler/AP_Scheduler.h>
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
|
|
const AP_Param::GroupInfo AP_RollController::var_info[] = {
|
|
// @Param: 2SRV_TCONST
|
|
// @DisplayName: Roll Time Constant
|
|
// @Description: Time constant in seconds from demanded to achieved roll angle. Most models respond well to 0.5. May be reduced for faster responses, but setting lower than a model can achieve will not help.
|
|
// @Range: 0.4 1.0
|
|
// @Units: s
|
|
// @Increment: 0.1
|
|
// @User: Advanced
|
|
AP_GROUPINFO("2SRV_TCONST", 0, AP_RollController, gains.tau, 0.5f),
|
|
|
|
// index 1 to 3 reserved for old PID values
|
|
|
|
// @Param: 2SRV_RMAX
|
|
// @DisplayName: Maximum Roll Rate
|
|
// @Description: This sets the maximum roll rate that the attitude controller will demand (degrees/sec) in angle stabilized modes. Setting it to zero disables this limit.
|
|
// @Range: 0 180
|
|
// @Units: deg/s
|
|
// @Increment: 1
|
|
// @User: Advanced
|
|
AP_GROUPINFO("2SRV_RMAX", 4, AP_RollController, gains.rmax_pos, 0),
|
|
|
|
// index 5, 6 reserved for old IMAX, FF
|
|
|
|
// @Param: _RATE_P
|
|
// @DisplayName: Roll axis rate controller P gain
|
|
// @Description: Roll axis rate controller P gain. Corrects in proportion to the difference between the desired roll rate vs actual roll rate
|
|
// @Range: 0.08 0.35
|
|
// @Increment: 0.005
|
|
// @User: Standard
|
|
|
|
// @Param: _RATE_I
|
|
// @DisplayName: Roll axis rate controller I gain
|
|
// @Description: Roll axis rate controller I gain. Corrects long-term difference in desired roll rate vs actual roll rate
|
|
// @Range: 0.01 0.6
|
|
// @Increment: 0.01
|
|
// @User: Standard
|
|
|
|
// @Param: _RATE_IMAX
|
|
// @DisplayName: Roll axis rate controller I gain maximum
|
|
// @Description: Roll axis rate controller I gain maximum. Constrains the maximum that the I term will output
|
|
// @Range: 0 1
|
|
// @Increment: 0.01
|
|
// @User: Standard
|
|
|
|
// @Param: _RATE_D
|
|
// @DisplayName: Roll axis rate controller D gain
|
|
// @Description: Roll axis rate controller D gain. Compensates for short-term change in desired roll rate vs actual roll rate
|
|
// @Range: 0.001 0.03
|
|
// @Increment: 0.001
|
|
// @User: Standard
|
|
|
|
// @Param: _RATE_FF
|
|
// @DisplayName: Roll axis rate controller feed forward
|
|
// @Description: Roll axis rate controller feed forward
|
|
// @Range: 0 3.0
|
|
// @Increment: 0.001
|
|
// @User: Standard
|
|
|
|
// @Param: _RATE_FLTT
|
|
// @DisplayName: Roll axis rate controller target frequency in Hz
|
|
// @Description: Roll axis rate controller target frequency in Hz
|
|
// @Range: 2 50
|
|
// @Increment: 1
|
|
// @Units: Hz
|
|
// @User: Standard
|
|
|
|
// @Param: _RATE_FLTE
|
|
// @DisplayName: Roll axis rate controller error frequency in Hz
|
|
// @Description: Roll axis rate controller error frequency in Hz
|
|
// @Range: 2 50
|
|
// @Increment: 1
|
|
// @Units: Hz
|
|
// @User: Standard
|
|
|
|
// @Param: _RATE_FLTD
|
|
// @DisplayName: Roll axis rate controller derivative frequency in Hz
|
|
// @Description: Roll axis rate controller derivative frequency in Hz
|
|
// @Range: 0 50
|
|
// @Increment: 1
|
|
// @Units: Hz
|
|
// @User: Standard
|
|
|
|
// @Param: _RATE_SMAX
|
|
// @DisplayName: Roll slew rate limit
|
|
// @Description: Sets an upper limit on the slew rate produced by the combined P and D gains. If the amplitude of the control action produced by the rate feedback exceeds this value, then the D+P gain is reduced to respect the limit. This limits the amplitude of high frequency oscillations caused by an excessive gain. The limit should be set to no more than 25% of the actuators maximum slew rate to allow for load effects. Note: The gain will not be reduced to less than 10% of the nominal value. A value of zero will disable this feature.
|
|
// @Range: 0 200
|
|
// @Increment: 0.5
|
|
// @User: Advanced
|
|
|
|
// @Param: _RATE_PDMX
|
|
// @DisplayName: Roll axis rate controller PD sum maximum
|
|
// @Description: Roll axis rate controller PD sum maximum. The maximum/minimum value that the sum of the P and D term can output
|
|
// @Range: 0 1
|
|
// @Increment: 0.01
|
|
|
|
// @Param: _RATE_D_FF
|
|
// @DisplayName: Roll Derivative FeedForward Gain
|
|
// @Description: FF D Gain which produces an output that is proportional to the rate of change of the target
|
|
// @Range: 0 0.03
|
|
// @Increment: 0.001
|
|
// @User: Advanced
|
|
|
|
// @Param: _RATE_NTF
|
|
// @DisplayName: Roll Target notch filter index
|
|
// @Description: Roll Target notch filter index
|
|
// @Range: 1 8
|
|
// @User: Advanced
|
|
|
|
// @Param: _RATE_NEF
|
|
// @DisplayName: Roll Error notch filter index
|
|
// @Description: Roll Error notch filter index
|
|
// @Range: 1 8
|
|
// @User: Advanced
|
|
|
|
AP_SUBGROUPINFO(rate_pid, "_RATE_", 9, AP_RollController, AC_PID),
|
|
|
|
AP_GROUPEND
|
|
};
|
|
|
|
// constructor
|
|
AP_RollController::AP_RollController(const AP_FixedWing &parms)
|
|
: AP_FW_Controller(parms,
|
|
AC_PID::Defaults{
|
|
.p = 0.08,
|
|
.i = 0.15,
|
|
.d = 0.0,
|
|
.ff = 0.345,
|
|
.imax = 0.666,
|
|
.filt_T_hz = 3.0,
|
|
.filt_E_hz = 0.0,
|
|
.filt_D_hz = 12.0,
|
|
.srmax = 150.0,
|
|
.srtau = 1.0
|
|
},
|
|
AP_AutoTune::ATType::AUTOTUNE_ROLL)
|
|
{
|
|
AP_Param::setup_object_defaults(this, var_info);
|
|
}
|
|
|
|
float AP_RollController::get_measured_rate() const
|
|
{
|
|
return AP::ahrs().get_gyro().x;
|
|
}
|
|
|
|
float AP_RollController::get_airspeed() const
|
|
{
|
|
float aspeed;
|
|
if (!AP::ahrs().airspeed_estimate(aspeed)) {
|
|
// If no airspeed available use 0
|
|
aspeed = 0.0;
|
|
}
|
|
return aspeed;
|
|
}
|
|
|
|
bool AP_RollController::is_underspeed(const float aspeed) const
|
|
{
|
|
return aspeed <= float(aparm.airspeed_min);
|
|
}
|
|
|
|
/*
|
|
Function returns an equivalent aileron deflection in centi-degrees in the range from -4500 to 4500
|
|
A positive demand is up
|
|
Inputs are:
|
|
1) demanded bank angle in centi-degrees
|
|
2) control gain scaler = scaling_speed / aspeed
|
|
3) boolean which is true when stabilise mode is active
|
|
4) minimum FBW airspeed (metres/sec)
|
|
*/
|
|
float AP_RollController::get_servo_out(int32_t angle_err, float scaler, bool disable_integrator, bool ground_mode)
|
|
{
|
|
if (gains.tau < 0.05f) {
|
|
gains.tau.set(0.05f);
|
|
}
|
|
|
|
// Calculate the desired roll rate (deg/sec) from the angle error
|
|
angle_err_deg = angle_err * 0.01;
|
|
float desired_rate = angle_err_deg/ gains.tau;
|
|
|
|
// Limit the demanded roll rate
|
|
if (gains.rmax_pos && desired_rate < -gains.rmax_pos) {
|
|
desired_rate = - gains.rmax_pos;
|
|
} else if (gains.rmax_pos && desired_rate > gains.rmax_pos) {
|
|
desired_rate = gains.rmax_pos;
|
|
}
|
|
|
|
return _get_rate_out(desired_rate, scaler, disable_integrator, get_airspeed(), ground_mode);
|
|
}
|
|
|
|
/*
|
|
convert from old to new PIDs
|
|
this is a temporary conversion function during development
|
|
*/
|
|
void AP_RollController::convert_pid()
|
|
{
|
|
AP_Float &ff = rate_pid.ff();
|
|
if (ff.configured()) {
|
|
return;
|
|
}
|
|
float old_ff=0, old_p=1.0, old_i=0.3, old_d=0.08;
|
|
int16_t old_imax=3000;
|
|
bool have_old = AP_Param::get_param_by_index(this, 1, AP_PARAM_FLOAT, &old_p);
|
|
have_old |= AP_Param::get_param_by_index(this, 3, AP_PARAM_FLOAT, &old_i);
|
|
have_old |= AP_Param::get_param_by_index(this, 2, AP_PARAM_FLOAT, &old_d);
|
|
have_old |= AP_Param::get_param_by_index(this, 6, AP_PARAM_FLOAT, &old_ff);
|
|
have_old |= AP_Param::get_param_by_index(this, 5, AP_PARAM_INT16, &old_imax);
|
|
if (!have_old) {
|
|
// none of the old gains were set
|
|
return;
|
|
}
|
|
|
|
const float kp_ff = MAX((old_p - old_i * gains.tau) * gains.tau - old_d, 0);
|
|
rate_pid.ff().set_and_save(old_ff + kp_ff);
|
|
rate_pid.kI().set_and_save_ifchanged(old_i * gains.tau);
|
|
rate_pid.kP().set_and_save_ifchanged(old_d);
|
|
rate_pid.kD().set_and_save_ifchanged(0);
|
|
rate_pid.kIMAX().set_and_save_ifchanged(old_imax/4500.0);
|
|
}
|