ardupilot/mk/PX4/ROMFS/init.d/rc.APM

#!nsh

# APM startup script for NuttX on PX4

# To disable APM startup add a /fs/microsd/APM/nostart file
# To enable mkblctrl startup add a /fs/microsd/APM/mkblctrl file
# To enable mkblctrl_+ startup add a /fs/microsd/APM/mkblctrl_+ file
# To enable mkblctrl_x startup add a /fs/microsd/APM/mkblctrl_x file
# To enable PWM on FMUv1 on ttyS1 add a /fs/microsd/APM/AUXPWM.en file

set deviceA /dev/ttyACM0

# check for an old file called APM, caused by 
# a bug in an earlier firmware release
if [ -f /fs/microsd/APM ]
then
    echo "APM file found - renaming"
    mv /fs/microsd/APM /fs/microsd/APM.old
fi

if [ -f /fs/microsd/APM/nostart ]
then
    echo "APM/nostart found - skipping APM startup"
    sh /etc/init.d/rc.error
fi

# mount binfs so we can find the built-in apps
if [ -f /bin/reboot ]
then
    echo "binfs already mounted"
else
    echo "Mounting binfs"
    if mount -t binfs /dev/null /bin
    then
            echo "binfs mounted OK"
    else
            sh /etc/init.d/rc.error
    fi
fi

set sketch NONE
if rm /fs/microsd/APM/boot.log
then
    echo "removed old boot.log"
fi
set logfile /fs/microsd/APM/BOOT.LOG

if [ ! -f /bin/ArduPilot ]
then
    echo "/bin/ardupilot not found"
    sh /etc/init.d/rc.error
fi

if mkdir /fs/microsd/APM > /dev/null
then
    echo "Created APM directory"
fi

if [ -f /bin/px4io ]
then
    if [ -f /bin/lsm303d ]
    then
        echo "Detected FMUv2 board"
        set BOARD FMUv2
    else
        echo "Detected FMUv1 board"
        set BOARD FMUv1
    fi
else
    echo "Detected FMUv4 board"
    set BOARD FMUv4
fi

if [ $BOARD == FMUv1 ]
then
    set deviceC /dev/ttyS2
    if [ -f /fs/microsd/APM/AUXPWM.en ]
    then
        set deviceD /dev/null
    else
        set deviceD /dev/ttyS1
    fi
else
    set deviceC /dev/ttyS1
    set deviceD /dev/ttyS2
fi

if uorb start
then
    echo "uorb started OK"
else
    sh /etc/init.d/rc.error
fi

# start mkblctrl driver if configured
if [ -f /fs/microsd/APM/mkblctrl ]
then
    echo "Setting up mkblctrl driver"
    echo "Setting up mkblctrl driver" >> $logfile
    mkblctrl -d /dev/pwm_output
fi

if [ -f /fs/microsd/APM/mkblctrl_+ ]
then
    echo "Setting up mkblctrl driver +"
    echo "Setting up mkblctrl driver +" >> $logfile
    mkblctrl -mkmode + -d /dev/pwm_output
fi

if [ -f /fs/microsd/APM/mkblctrl_x ]
then
    echo "Setting up mkblctrl driver x"
    echo "Setting up mkblctrl driver x" >> $logfile
    mkblctrl -mkmode x -d /dev/pwm_output
fi

if [ -f /bin/px4io ]
then
    echo "Trying PX4IO board"

    # try the px4io start twice. Some FMUv2 board don't
    # come up the first time
    set HAVE_PX4IO false
    if px4io start norc
    then
        set HAVE_PX4IO true
    else
        # it may be in bootloader mode
        echo Loading /etc/px4io/px4io.bin
        tone_alarm MBABGP
        if px4io update /etc/px4io/px4io.bin
        then
            echo "upgraded PX4IO firmware OK"
            tone_alarm MSPAA
        else
            echo "Failed to upgrade PX4IO firmware"
            tone_alarm MNGGG
        fi
        sleep 1
        if px4io start norc
        then
            set HAVE_PX4IO true
            # play happy tune again
            if [ -f /etc/tones/startup ]
            then
                tone_alarm /etc/tones/startup
            else
                tone_alarm 1
            fi
        fi
    fi
else
    set HAVE_PX4IO false
    echo "No PX4IO support"
fi

if [ $HAVE_PX4IO == true ]
then
    echo "PX4IO board OK"
    if px4io checkcrc /etc/px4io/px4io.bin
    then
        echo "PX4IO CRC OK"
    else
        echo "PX4IO CRC failure"
        echo "PX4IO CRC failure" >> $logfile
        tone_alarm MBABGP

        if px4io safety_on
        then
            echo "PX4IO disarm OK"
        else
            echo "PX4IO disarm failed"
        fi

        sleep 1

        if px4io forceupdate 14662 /etc/px4io/px4io.bin
        then
            sleep 1
            if px4io start norc
            then
                echo "PX4IO restart OK"
                echo "PX4IO restart OK" >> $logfile
                tone_alarm MSPAA
            else
                echo "PX4IO restart failed"
                echo "PX4IO restart failed" >> $logfile
                tone_alarm MNGGG
                sh /etc/init.d/rc.error
            fi
        else
            echo "PX4IO update failed"
            echo "PX4IO update failed" >> $logfile
            tone_alarm MNGGG
        fi
    fi
else
    echo "No PX4IO board found"
    echo "No PX4IO board found" >> $logfile

    if [ $BOARD == FMUv2 ]
    then
        sh /etc/init.d/rc.error
    fi
fi

if [ $BOARD == FMUv1 -a $deviceD == /dev/ttyS1 ]
then
    echo "Setting FMU mode_serial"
    fmu mode_serial
else
    if fmu mode_pwm4
    then
        echo "Set FMU mode_pwm4"
    fi
fi


if mtd start /fs/mtd
then
    echo "started mtd driver OK"
else
    echo "failed to start mtd driver"
    echo "failed to start mtd driver" >> $logfile
    sh /etc/init.d/rc.error           
fi

if mtd readtest /fs/mtd
then
    echo "mtd readtest OK"
else
    echo "failed to read mtd"
    echo "failed to read mtd" >> $logfile
    sh /etc/init.d/rc.error           
fi

if [ $BOARD == FMUv2 -o $BOARD == FMUv4 ]
then
  # the ramtron on FMUv2 is very fast and can handle trillions of
  # writes. This full rw test on each boot ensures it is working
  # properly. We have one board that failed this, so
  # the test is arguably worth having
  if mtd rwtest /fs/mtd
  then
    echo "mtd rwtest OK"
  else
    echo "failed to test mtd"
    echo "failed to test mtd" >> $logfile
    sh /etc/init.d/rc.error           
  fi
fi

if adc start
then
    echo "adc started OK"
else
    echo "No adc" >> $logfile
    sh /etc/init.d/rc.error
fi

echo Starting ArduPilot $deviceA $deviceC $deviceD
if ArduPilot -d $deviceA -d2 $deviceC -d3 $deviceD start
then
    echo ArduPilot started OK
else
    sh /etc/init.d/rc.error
fi

echo "rc.APM finished"