mirror of https://github.com/ArduPilot/ardupilot
52 lines
1.3 KiB
Plaintext
52 lines
1.3 KiB
Plaintext
These FMU and FMUv2 bootloader images are built from:
|
|
|
|
https://github.com/ArduPilot/Bootloader
|
|
|
|
Bootloader details
|
|
------------------
|
|
|
|
px4fmu_bl.bin:
|
|
for F405 based fmuv1
|
|
boots at 0x08004000
|
|
board ID 5
|
|
|
|
px4fmuv2_bl.bin:
|
|
for F427 based fmuv2 boards
|
|
boots at 0x08004000
|
|
board ID 9
|
|
|
|
px4fmuv4_bl.bin:
|
|
for F427 based fmuv4 boards
|
|
boots at 0x08004000
|
|
board ID 11
|
|
|
|
px4io_bl.bin:
|
|
for IOMCU on fmuv1
|
|
|
|
px4fmuv4pro_bl.bin:
|
|
for F427 based p4pro board from drotek
|
|
|
|
skyviper_v2450_bl.bin:
|
|
for F427 based skyviper-v2450 boards (based on fmuv3)
|
|
reserves sectors 22 and 23 for ArduPilot storage
|
|
board ID 9
|
|
|
|
skyviperf412_bl.bin:
|
|
For F412 processors, setup to load on USART2 on pins PA2/PA3
|
|
Setup for code start at 0x0800C000
|
|
2 sectors reserved for storage, plus bootloader
|
|
|
|
Bootloader update on px4 builds
|
|
-------------------------------
|
|
|
|
For ArduPilot builds using HAL_PX4 the bootloaders are stored in ROMFS
|
|
to make it easier for users to update their bootloaders using:
|
|
|
|
bl_update /etc/bootloader/fmu_bl.bin
|
|
|
|
from a nsh prompt. Users can get a nsh prompt either via the CLI in
|
|
test -> shell, or by booting with no SD card installed
|
|
|
|
to use NSH to do this, please see the Wiki
|
|
http://dev.ardupilot.org/wiki/interfacing-with-pixhawk-using-the-nsh
|