.. |
AC_AttitudeControl
|
AC_AttitudeControl: Add missing variable initalisations
|
2018-09-15 10:16:25 +09:00 |
AC_Avoidance
|
AC_Avoid: use elseif because value does not change
|
2018-04-23 19:45:50 +09:00 |
AC_Fence
|
AC_Fence: add always land option
|
2018-08-01 15:09:07 +09:00 |
AC_InputManager
|
AC_InputManager: removed create() method for objects
|
2017-12-14 08:12:28 +11:00 |
AC_PID
|
AC_PID: Fix D term initialisation
|
2018-09-15 10:16:04 +09:00 |
AC_PrecLand
|
AC_PrecLand: replace AP_InertialNav by AHRS
|
2018-04-17 17:21:35 +09:00 |
AC_Sprayer
|
AC_Sprayer: use ahrs singleton
|
2018-04-12 14:23:33 +09:00 |
AC_WPNav
|
AC_Loiter: reduce twitch on init
|
2018-09-08 09:21:11 +09:00 |
APM_Control
|
APM_Control: get_throttle_out_from_pitch() accepts dt as argument
|
2018-06-28 21:55:20 +09:00 |
AP_ADC
|
AP_ADC: update to match plane3.9.0
|
2018-08-02 12:38:37 +09:00 |
AP_ADSB
|
AP_ADSB: fix snprintf warning
|
2018-05-25 12:54:25 -07:00 |
AP_AHRS
|
AP_AHRS: Internalize EKF getLLH altitude management
|
2018-10-05 10:23:53 +09:00 |
AP_AccelCal
|
AP_AccelCal: stop using mavlink_snoop for target traffic
|
2018-03-28 09:28:23 +09:00 |
AP_AdvancedFailsafe
|
AP_AdvancedFailsafe: remove rcmap member from AP_AdvancedFailsafe
|
2018-05-05 18:06:31 +09:00 |
AP_Airspeed
|
AP_Airspeed: removed ADC.h include
|
2018-08-02 12:38:49 +09:00 |
AP_Arming
|
AP_Arming: rename rudder_arming to get_rudder_arming_type
|
2018-09-15 10:12:44 +09:00 |
AP_Avoidance
|
AP_Avoidance: track src with correct label - use MAVLink label
|
2018-05-25 12:44:59 +09:00 |
AP_BLHeli
|
AP_BLHeli: pass motor mask to serial_setup_output()
|
2018-08-06 11:17:33 +10:00 |
AP_Baro
|
AP_Baro: Use SITL singleton
|
2018-06-26 00:02:01 +01:00 |
AP_BattMonitor
|
AP_BattMonitor: removed ADC.h include
|
2018-08-02 12:38:44 +09:00 |
AP_Beacon
|
AP_Beacon: Use SITL singleton
|
2018-06-26 00:02:01 +01:00 |
AP_BoardConfig
|
AP_BoardConfig: match plane3.9.0
|
2018-08-02 12:38:43 +09:00 |
AP_Buffer
|
…
|
|
AP_Button
|
…
|
|
AP_Camera
|
AP_Camera: match plane3.9.0
|
2018-08-02 12:38:42 +09:00 |
AP_Common
|
AP_Common: AP_FWVersion: create singleton
|
2018-06-18 19:10:37 +01:00 |
AP_Compass
|
AP_Compass: use rotation_equal() from AP_Compass
|
2018-10-01 14:29:08 +09:00 |
AP_Declination
|
AP_Declination: use floorf()
|
2018-05-07 11:43:23 +10:00 |
AP_Devo_Telem
|
AP_Devo_Telem: fixed to check for have_position
|
2018-04-24 10:44:28 +10:00 |
AP_FlashStorage
|
AP_FlashStorage: fixed build of example on small memory boards
|
2018-07-11 15:32:35 +09:00 |
AP_Follow
|
AP_Follow: fixup offset initialisation
|
2018-08-02 12:39:05 +09:00 |
AP_Frsky_Telem
|
AP_Frsky_Telem: use AP_FWVersion singleton
|
2018-06-18 19:10:37 +01:00 |
AP_GPS
|
AP_GPS: removed ADC.h include
|
2018-08-02 12:38:41 +09:00 |
AP_Gripper
|
AP_Gripper: add singleton
|
2018-06-11 19:07:39 +01:00 |
AP_HAL
|
AP_HAL: added chanmask to serial_setup_output()
|
2018-08-06 11:15:59 +10:00 |
AP_HAL_AVR
|
…
|
|
AP_HAL_ChibiOS
|
AP_HAL_ChibiOS: update kakutef7 hwdef
|
2018-10-26 16:16:36 +10:00 |
AP_HAL_Empty
|
HAL_Empty: match plane 3.9.0
|
2018-08-02 12:38:41 +09:00 |
AP_HAL_F4Light
|
HAL_F4Light: support uartG
|
2018-06-29 08:17:38 +10:00 |
AP_HAL_FLYMAPLE
|
…
|
|
AP_HAL_Linux
|
HAL_Linux: updated to new tonealarm system
|
2018-08-02 12:38:59 +09:00 |
AP_HAL_PX4
|
HAL_PX4: updated to new tonealarm system
|
2018-08-02 12:39:00 +09:00 |
AP_HAL_SITL
|
HAL_SITL: update to plane3.9.0beta6
|
2018-08-02 12:38:32 +09:00 |
AP_HAL_VRBRAIN
|
HAL_VRBrain: match plane 3.9.0
|
2018-08-02 12:38:40 +09:00 |
AP_ICEngine
|
AP_ICEngine: Use RC_Channels instead of hal.rcin
|
2018-04-11 21:47:07 +01:00 |
AP_IOMCU
|
AP_IOMCU: cope with IOMCU reset in flight
|
2018-09-08 09:21:49 +09:00 |
AP_IRLock
|
AP_IRLock: Replace find_object with SITL singleton
|
2018-06-27 14:59:33 -07:00 |
AP_InertialNav
|
AP_InertialNav: remove dead get_hagl method
|
2018-04-05 17:35:55 +09:00 |
AP_InertialSensor
|
AP_InertialSensor: update SITL to have device IDs
|
2018-08-02 12:38:39 +09:00 |
AP_JSButton
|
AP_JSButton: Add servo toggle button function
|
2017-12-28 14:14:47 -05:00 |
AP_L1_Control
|
AP_L1_Control: update_waypoint gets dist_min argument
|
2018-04-05 12:14:59 +09:00 |
AP_Landing
|
AP_Landing: fixed use of double precision maths
|
2018-05-07 11:43:23 +10:00 |
AP_LandingGear
|
AP_LandingGear: Remove deploy_lock state
|
2018-09-03 16:50:13 +09:00 |
AP_LeakDetector
|
AP_LeakDetector: removed create() method for objects
|
2017-12-14 08:12:28 +11:00 |
AP_Math
|
AP_Math: added rotation_equal()
|
2018-10-01 14:29:05 +09:00 |
AP_Menu
|
…
|
|
AP_Mission
|
AP_Mission: starts_with_takeoff_cmd skips past mav_cmd_nav_delay
|
2018-08-27 12:31:02 +09:00 |
AP_Module
|
AP_Module: removed ADC.h include
|
2018-08-02 12:38:50 +09:00 |
AP_Motors
|
AP_Motors: include boost_throttle in get_motor_mask
|
2018-08-27 12:32:27 +09:00 |
AP_Mount
|
AP_Mount: removed ADC.h include
|
2018-08-02 12:38:52 +09:00 |
AP_NavEKF
|
AP_NavEKF: Make the status unions use bool, add static asserts
|
2018-04-11 09:47:43 +09:00 |
AP_NavEKF2
|
AP_NavEKF2: Fix roundoff, and missing offset handling of getLLH
|
2018-10-05 10:23:48 +09:00 |
AP_NavEKF3
|
AP_NavEKF3: Fix roundoff, and missing offset handling of getLLH
|
2018-10-05 10:23:50 +09:00 |
AP_Navigation
|
AP_L1_Control: update_waypoint gets dist_min argument
|
2018-04-05 12:14:59 +09:00 |
AP_Notify
|
AP_Notify: init gpio state for LEDs
|
2018-10-26 15:18:53 +09:00 |
AP_OSD
|
AP_OSD: update to match plane3.9.0
|
2018-08-02 12:38:38 +09:00 |
AP_OpticalFlow
|
Global: remove minlure
|
2018-06-26 07:32:08 -07:00 |
AP_Parachute
|
AP_Parachute: removed create() method for objects
|
2017-12-14 08:12:28 +11:00 |
AP_Param
|
AP_Param: warn on last pass only about unknown parameters
|
2018-06-28 10:18:19 -07:00 |
AP_Param_Helper
|
AP_Param_Helper: HAL_F4Light parameters divided into common and board specific
|
2018-03-05 15:00:18 +00:00 |
AP_Proximity
|
AP_Proximity: Change min and max range to support both 60m and 600Hz
|
2018-08-27 12:33:57 +09:00 |
AP_RAMTRON
|
AP_RAMTRON: added RAMTRON fram device driver
|
2018-01-15 11:46:02 +11:00 |
AP_RCMapper
|
AP_RCMapper: removed create() method for objects
|
2017-12-14 08:12:28 +11:00 |
AP_RCProtocol
|
AP_RCProtocol: Fix out of bounds write, CID 308323 and 308333
|
2018-08-07 13:27:45 +10:00 |
AP_ROMFS
|
AP_ROMFS: fixed error handling in tinflate
|
2018-08-07 13:27:47 +10:00 |
AP_RPM
|
AP_RPM: Use SITL singleton
|
2018-06-26 00:02:01 +01:00 |
AP_RSSI
|
AP_RSSI: const get_gpio and fix includes
|
2018-08-01 15:10:44 +09:00 |
AP_RTC
|
AP_RTC: return 0 from get_utc_usec if rtc not set
|
2018-06-15 08:01:22 +10:00 |
AP_Radio
|
AP_Radio: fix fallthrough with ArduPilot macro
|
2018-05-22 15:25:00 +01:00 |
AP_Rally
|
AP_Rally: Remove stale comment, and unneded define check
|
2018-04-11 09:45:45 +09:00 |
AP_RangeFinder
|
AP_RangeFinder: Remove range enforcement on out of range
|
2018-08-27 12:34:16 +09:00 |
AP_Relay
|
AP_Relay: document BB Blue pin options
|
2018-05-03 15:35:28 +01:00 |
AP_SBusOut
|
AP_SBusOut: removed create() method for objects
|
2017-12-14 08:12:28 +11:00 |
AP_Scheduler
|
AP_Scheduler: use AP_FWVersion singleton
|
2018-06-18 19:10:37 +01:00 |
AP_SerialManager
|
AP_SerialManager: make console do mavlink2 by default
|
2018-08-02 12:38:45 +09:00 |
AP_ServoRelayEvents
|
AP_ServoRelayEvents: add singleton
|
2018-04-18 20:31:55 +09:00 |
AP_SmartRTL
|
AP_SmartRTL: use AP_FWVersion singleton
|
2018-06-18 19:10:37 +01:00 |
AP_Soaring
|
AP_Soaring: const some accessors
|
2018-05-29 13:00:40 +10:00 |
AP_SpdHgtControl
|
AP_SpdHgtControl: added function to reset integrator
|
2017-03-14 08:20:48 +11:00 |
AP_Stats
|
AP_Stats: use set_and_save_ifchanged()
|
2018-08-06 21:46:42 +10:00 |
AP_TECS
|
AP_TECS: use ins singleton
|
2018-03-16 00:37:35 -07:00 |
AP_TempCalibration
|
AP_TempCalibration: fix FALLTHROUGH
|
2018-03-21 08:24:56 +09:00 |
AP_TemperatureSensor
|
AP_TemperatureSensor: remove pointless constructor
|
2018-05-17 15:37:14 +10:00 |
AP_Terrain
|
AP_Terrain: Reduce memory consumption, simplify enable checking
|
2018-06-29 09:00:01 +10:00 |
AP_Tuning
|
AP_Tuning: Use RC_Channels instead of hal.rcin
|
2018-04-11 21:47:07 +01:00 |
AP_UAVCAN
|
AP_UAVCAN: helper func
|
2018-06-09 22:46:48 -07:00 |
AP_Vehicle
|
AP_Vehicle: Add the ArduSub vehicle type.
|
2017-02-21 11:26:14 +11:00 |
AP_VisualOdom
|
AP_VisualOdom: class accepts deltas from visual odom camera
|
2017-04-19 11:04:40 +09:00 |
AP_Volz_Protocol
|
AP_Volz_Protocol: use AP::serialmanager()
|
2017-12-21 04:35:11 +00:00 |
AP_WheelEncoder
|
AP_WheelEncoder: hide parameters by default
|
2018-02-12 12:16:41 +09:00 |
AP_Winch
|
AP_Winch: remove redundant member
|
2017-10-27 09:20:38 +09:00 |
DataFlash
|
DataFlash: move log-transfer state variables into enumerated variable
|
2018-07-02 10:46:52 +10:00 |
Filter
|
Filter: added a notch filter
|
2017-08-29 13:52:29 +10:00 |
GCS_MAVLink
|
GCS_MAVLink: expose HUD throttle accessor
|
2018-07-05 11:39:46 +10:00 |
PID
|
PID: Remove examples/keywords
|
2018-04-11 21:47:07 +01:00 |
RC_Channel
|
RC_Channels: zero all channels before populating
|
2018-08-07 09:42:49 +10:00 |
SITL
|
SITL: match plane3.9.0
|
2018-08-02 12:38:48 +09:00 |
SRV_Channel
|
SRV_Channel: fixes channel numbering for channel already assigned message
|
2018-08-01 15:03:46 +09:00 |
StorageManager
|
StorageManager: allow for 15k storage
|
2018-06-24 08:26:28 +10:00 |
doc
|
…
|
|