mirror of https://github.com/ArduPilot/ardupilot
47 lines
2.9 KiB
C++
47 lines
2.9 KiB
C++
#pragma once
|
|
|
|
#include <AP_Param/AP_Param.h>
|
|
|
|
class AP_BattMonitor_Params {
|
|
public:
|
|
static const struct AP_Param::GroupInfo var_info[];
|
|
|
|
AP_BattMonitor_Params(void);
|
|
|
|
/* Do not allow copies */
|
|
CLASS_NO_COPY(AP_BattMonitor_Params);
|
|
|
|
// low voltage sources (used for BATT_LOW_TYPE parameter)
|
|
enum BattMonitor_LowVoltage_Source {
|
|
BattMonitor_LowVoltageSource_Raw = 0,
|
|
BattMonitor_LowVoltageSource_SagCompensated = 1
|
|
};
|
|
enum class Options : uint8_t {
|
|
Ignore_UAVCAN_SoC = (1U<<0), // Ignore UAVCAN State-of-Charge (charge %) supplied value from the device and use the internally calculated one
|
|
MPPT_Use_Input_Value = (1U<<1), // MPPT reports voltage and current from Input (usually solar panel) instead of the output
|
|
MPPT_Power_Off_At_Disarm = (1U<<2), // MPPT Disabled when vehicle is disarmed, if HW supports it
|
|
MPPT_Power_On_At_Arm = (1U<<3), // MPPT Enabled when vehicle is armed, if HW supports it
|
|
MPPT_Power_Off_At_Boot = (1U<<4), // MPPT Disabled at startup (aka boot), if HW supports it
|
|
MPPT_Power_On_At_Boot = (1U<<5), // MPPT Enabled at startup (aka boot), if HW supports it. If Power_Off_at_Boot is also set, the behavior is Power_Off_at_Boot
|
|
GCS_Resting_Voltage = (1U<<6), // send resistance resting voltage to GCS
|
|
};
|
|
|
|
BattMonitor_LowVoltage_Source failsafe_voltage_source(void) const { return (enum BattMonitor_LowVoltage_Source)_failsafe_voltage_source.get(); }
|
|
|
|
AP_Int32 _pack_capacity; /// battery pack capacity less reserve in mAh
|
|
AP_Int32 _serial_number; /// battery serial number, automatically filled in on SMBus batteries
|
|
AP_Float _low_voltage; /// voltage level used to trigger a low battery failsafe
|
|
AP_Float _low_capacity; /// capacity level used to trigger a low battery failsafe
|
|
AP_Float _critical_voltage; /// voltage level used to trigger a critical battery failsafe
|
|
AP_Float _critical_capacity; /// capacity level used to trigger a critical battery failsafe
|
|
AP_Int32 _arming_minimum_capacity; /// capacity level required to arm
|
|
AP_Float _arming_minimum_voltage; /// voltage level required to arm
|
|
AP_Int32 _options; /// Options
|
|
AP_Int16 _watt_max; /// max battery power allowed. Reduce max throttle to reduce current to satisfy t his limit
|
|
AP_Int8 _type; /// 0=disabled, 3=voltage only, 4=voltage and current
|
|
AP_Int8 _low_voltage_timeout; /// timeout in seconds before a low voltage event will be triggered
|
|
AP_Int8 _failsafe_voltage_source; /// voltage type used for detection of low voltage event
|
|
AP_Int8 _failsafe_low_action; /// action to preform on a low battery failsafe
|
|
AP_Int8 _failsafe_critical_action; /// action to preform on a critical battery failsafe
|
|
};
|