mirror of https://github.com/ArduPilot/ardupilot
159 lines
6.6 KiB
C
159 lines
6.6 KiB
C
#pragma once
|
|
|
|
#include <AP_HAL/AP_HAL_Boards.h>
|
|
|
|
// Just so that it's completely clear...
|
|
#define ENABLED 1
|
|
#define DISABLED 0
|
|
|
|
// this avoids a very common config error
|
|
#define ENABLE ENABLED
|
|
#define DISABLE DISABLED
|
|
|
|
#define BOTTOM_DETECTOR_TRIGGER_SEC 1.0
|
|
#define SURFACE_DETECTOR_TRIGGER_SEC 1.0
|
|
|
|
enum AutoSurfaceState {
|
|
AUTO_SURFACE_STATE_GO_TO_LOCATION,
|
|
AUTO_SURFACE_STATE_ASCEND
|
|
};
|
|
|
|
// Autopilot Yaw Mode enumeration
|
|
enum autopilot_yaw_mode {
|
|
AUTO_YAW_HOLD = 0, // pilot controls the heading
|
|
AUTO_YAW_LOOK_AT_NEXT_WP = 1, // point towards next waypoint (no pilot input accepted)
|
|
AUTO_YAW_ROI = 2, // point towards a location held in roi_WP (no pilot input accepted)
|
|
AUTO_YAW_LOOK_AT_HEADING = 3, // point towards a particular angle (not pilot input accepted)
|
|
AUTO_YAW_LOOK_AHEAD = 4, // point in the direction the vehicle is moving
|
|
AUTO_YAW_RESETTOARMEDYAW = 5, // point towards heading at time motors were armed
|
|
AUTO_YAW_CORRECT_XTRACK = 6, // steer the sub in order to correct for crosstrack error during line following
|
|
AUTO_YAW_RATE = 7 // steer the sub with the desired yaw rate
|
|
};
|
|
|
|
// Acro Trainer types
|
|
#define ACRO_TRAINER_DISABLED 0
|
|
#define ACRO_TRAINER_LEVELING 1
|
|
#define ACRO_TRAINER_LIMITED 2
|
|
|
|
// Yaw behaviours during missions - possible values for WP_YAW_BEHAVIOR parameter
|
|
#define WP_YAW_BEHAVIOR_NONE 0 // auto pilot will never control yaw during missions or rtl (except for DO_CONDITIONAL_YAW command received)
|
|
#define WP_YAW_BEHAVIOR_LOOK_AT_NEXT_WP 1 // auto pilot will face next waypoint or home during rtl
|
|
#define WP_YAW_BEHAVIOR_LOOK_AT_NEXT_WP_EXCEPT_RTL 2 // auto pilot will face next waypoint except when doing RTL at which time it will stay in it's last
|
|
#define WP_YAW_BEHAVIOR_LOOK_AHEAD 3 // auto pilot will look ahead during missions and rtl (primarily meant for traditional helicopters)
|
|
#define WP_YAW_BEHAVIOR_CORRECT_XTRACK 4 // point towards intermediate position target during line following
|
|
|
|
|
|
|
|
// Logging parameters - only 32 messages are available to the vehicle here.
|
|
enum LoggingParameters {
|
|
LOG_CONTROL_TUNING_MSG,
|
|
LOG_DATA_INT16_MSG,
|
|
LOG_DATA_UINT16_MSG,
|
|
LOG_DATA_INT32_MSG,
|
|
LOG_DATA_UINT32_MSG,
|
|
LOG_DATA_FLOAT_MSG,
|
|
LOG_GUIDEDTARGET_MSG
|
|
};
|
|
|
|
#define MASK_LOG_ATTITUDE_FAST (1<<0)
|
|
#define MASK_LOG_ATTITUDE_MED (1<<1)
|
|
#define MASK_LOG_GPS (1<<2)
|
|
#define MASK_LOG_PM (1<<3)
|
|
#define MASK_LOG_CTUN (1<<4)
|
|
#define MASK_LOG_NTUN (1<<5)
|
|
#define MASK_LOG_RCIN (1<<6)
|
|
#define MASK_LOG_IMU (1<<7)
|
|
#define MASK_LOG_CMD (1<<8)
|
|
#define MASK_LOG_CURRENT (1<<9)
|
|
#define MASK_LOG_RCOUT (1<<10)
|
|
#define MASK_LOG_OPTFLOW (1<<11)
|
|
#define MASK_LOG_PID (1<<12)
|
|
#define MASK_LOG_COMPASS (1<<13)
|
|
#define MASK_LOG_CAMERA (1<<15)
|
|
#define MASK_LOG_MOTBATT (1UL<<17)
|
|
#define MASK_LOG_IMU_FAST (1UL<<18)
|
|
#define MASK_LOG_IMU_RAW (1UL<<19)
|
|
#define MASK_LOG_ANY 0xFFFF
|
|
|
|
// GCS failsafe
|
|
#ifndef FS_GCS
|
|
# define FS_GCS DISABLED
|
|
#endif
|
|
#ifndef FS_GCS_TIMEOUT_MS
|
|
# define FS_GCS_TIMEOUT_MS 2500 // gcs failsafe triggers after this number of milliseconds with no GCS heartbeat
|
|
#endif
|
|
|
|
// missing terrain data failsafe
|
|
#ifndef FS_TERRAIN_TIMEOUT_MS
|
|
#define FS_TERRAIN_TIMEOUT_MS 1000 // 1 second of unhealthy rangefinder and/or missing terrain data will trigger failsafe
|
|
#endif
|
|
|
|
//////////////////////////////////////////////////////////////////////////////
|
|
// EKF Failsafe
|
|
// EKF failsafe definitions (FS_EKF_ENABLE parameter)
|
|
#define FS_EKF_ACTION_DISABLED 0 // Disabled
|
|
#define FS_EKF_ACTION_WARN_ONLY 1 // Send warning to gcs
|
|
#define FS_EKF_ACTION_DISARM 2 // Disarm
|
|
|
|
|
|
#ifndef FS_EKF_ACTION_DEFAULT
|
|
# define FS_EKF_ACTION_DEFAULT FS_EKF_ACTION_DISABLED // EKF failsafe
|
|
#endif
|
|
|
|
#ifndef FS_EKF_THRESHOLD_DEFAULT
|
|
# define FS_EKF_THRESHOLD_DEFAULT 0.8f // EKF failsafe's default compass and velocity variance threshold above which the EKF failsafe will be triggered
|
|
#endif
|
|
|
|
// GCS failsafe definitions (FS_GCS_ENABLE parameter)
|
|
#define FS_GCS_DISABLED 0 // Disabled
|
|
#define FS_GCS_WARN_ONLY 1 // Only send warning to gcs (only useful with multiple gcs links)
|
|
#define FS_GCS_DISARM 2 // Disarm
|
|
#define FS_GCS_HOLD 3 // Switch depth hold mode or poshold mode if available
|
|
#define FS_GCS_SURFACE 4 // Switch to surface mode
|
|
|
|
// Leak failsafe definitions (FS_LEAK_ENABLE parameter)
|
|
#define FS_LEAK_DISABLED 0 // Disabled
|
|
#define FS_LEAK_WARN_ONLY 1 // Only send warning to gcs
|
|
#define FS_LEAK_SURFACE 2 // Switch to surface mode
|
|
|
|
// Internal pressure failsafe threshold (FS_PRESS_MAX parameter)
|
|
#define FS_PRESS_MAX_DEFAULT 105000 // Maximum internal pressure in pascal before failsafe is triggered
|
|
// Internal pressure failsafe definitions (FS_PRESS_ENABLE parameter)
|
|
#define FS_PRESS_DISABLED 0
|
|
#define FS_PRESS_WARN_ONLY 1
|
|
|
|
// Internal temperature failsafe threshold (FS_TEMP_MAX parameter)
|
|
#define FS_TEMP_MAX_DEFAULT 62 // Maximum internal pressure in degrees C before failsafe is triggered
|
|
// Internal temperature failsafe definitions (FS_TEMP_ENABLE parameter)
|
|
#define FS_TEMP_DISABLED 0
|
|
#define FS_TEMP_WARN_ONLY 1
|
|
|
|
// Crash failsafe options
|
|
#define FS_CRASH_DISABLED 0
|
|
#define FS_CRASH_WARN_ONLY 1
|
|
#define FS_CRASH_DISARM 2
|
|
|
|
// Terrain failsafe actions for AUTO mode
|
|
#define FS_TERRAIN_DISARM 0
|
|
#define FS_TERRAIN_HOLD 1
|
|
#define FS_TERRAIN_SURFACE 2
|
|
|
|
// Pilot input failsafe actions
|
|
#define FS_PILOT_INPUT_DISABLED 0
|
|
#define FS_PILOT_INPUT_WARN_ONLY 1
|
|
#define FS_PILOT_INPUT_DISARM 2
|
|
|
|
// Amount of time to attempt recovery of valid rangefinder data before
|
|
// initiating terrain failsafe action
|
|
#define FS_TERRAIN_RECOVER_TIMEOUT_MS 10000
|
|
|
|
// for mavlink SET_POSITION_TARGET messages
|
|
#define MAVLINK_SET_POS_TYPE_MASK_Z_IGNORE (1<<2)
|
|
#define MAVLINK_SET_POS_TYPE_MASK_POS_IGNORE ((1<<0) | (1<<1) | (1<<2))
|
|
#define MAVLINK_SET_POS_TYPE_MASK_VEL_IGNORE ((1<<3) | (1<<4) | (1<<5))
|
|
#define MAVLINK_SET_POS_TYPE_MASK_ACC_IGNORE ((1<<6) | (1<<7) | (1<<8))
|
|
#define MAVLINK_SET_POS_TYPE_MASK_FORCE (1<<9)
|
|
#define MAVLINK_SET_POS_TYPE_MASK_YAW_IGNORE (1<<10)
|
|
#define MAVLINK_SET_POS_TYPE_MASK_YAW_RATE_IGNORE (1<<11)
|
|
|