Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-05 15:38:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
676c36bad4
ardupilot/libraries/RC_Channel/RC_Channel.cpp
Andrew Tridgell 676c36bad4 RC_Channel: fixed use of radio_in out of range for angle inputs 
this prevents mis-calculation of the angle when RC input goes outside
of the configured range. This impacted on throttle nudge in plane when
reverse thrust was enabled

thanks to Pompecukor for reporting!
2020-08-04 09:33:19 +10:00

1172 lines
35 KiB
C++
Raw Blame History

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* RC_Channel.cpp - class for one RC channel input
*/
#include <stdlib.h>
#include <cmath>
#include <AP_HAL/AP_HAL.h>
extern const AP_HAL::HAL& hal;
#include <AP_Math/AP_Math.h>
#include "RC_Channel.h"
#include <GCS_MAVLink/GCS.h>
#include <AC_Avoidance/AC_Avoid.h>
#include <AC_Sprayer/AC_Sprayer.h>
#include <AP_Camera/AP_Camera.h>
#include <AP_Camera/AP_RunCam.h>
#include <AP_Generator/AP_Generator_RichenPower.h>
#include <AP_Gripper/AP_Gripper.h>
#include <AP_ADSB/AP_ADSB.h>
#include <AP_LandingGear/AP_LandingGear.h>
#include <AP_ServoRelayEvents/AP_ServoRelayEvents.h>
#include <AP_Arming/AP_Arming.h>
#include <AP_Avoidance/AP_Avoidance.h>
#include <AP_GPS/AP_GPS.h>
#include <AC_Fence/AC_Fence.h>
#include <AP_VisualOdom/AP_VisualOdom.h>
#include <AP_AHRS/AP_AHRS.h>
#define SWITCH_DEBOUNCE_TIME_MS 200
const AP_Param::GroupInfo RC_Channel::var_info[] = {
// @Param: MIN
// @DisplayName: RC min PWM
// @Description: RC minimum PWM pulse width in microseconds. Typically 1000 is lower limit, 1500 is neutral and 2000 is upper limit.
// @Units: PWM
// @Range: 800 2200
// @Increment: 1
// @User: Advanced
AP_GROUPINFO("MIN", 1, RC_Channel, radio_min, 1100),
// @Param: TRIM
// @DisplayName: RC trim PWM
// @Description: RC trim (neutral) PWM pulse width in microseconds. Typically 1000 is lower limit, 1500 is neutral and 2000 is upper limit.
// @Units: PWM
// @Range: 800 2200
// @Increment: 1
// @User: Advanced
AP_GROUPINFO("TRIM", 2, RC_Channel, radio_trim, 1500),
// @Param: MAX
// @DisplayName: RC max PWM
// @Description: RC maximum PWM pulse width in microseconds. Typically 1000 is lower limit, 1500 is neutral and 2000 is upper limit.
// @Units: PWM
// @Range: 800 2200
// @Increment: 1
// @User: Advanced
AP_GROUPINFO("MAX", 3, RC_Channel, radio_max, 1900),
// @Param: REVERSED
// @DisplayName: RC reversed
// @Description: Reverse channel input. Set to 0 for normal operation. Set to 1 to reverse this input channel.
// @Values: 0:Normal,1:Reversed
// @User: Advanced
AP_GROUPINFO("REVERSED", 4, RC_Channel, reversed, 0),
// @Param: DZ
// @DisplayName: RC dead-zone
// @Description: PWM dead zone in microseconds around trim or bottom
// @Units: PWM
// @Range: 0 200
// @User: Advanced
AP_GROUPINFO("DZ", 5, RC_Channel, dead_zone, 0),
// @Param: OPTION
// @DisplayName: RC input option
// @Description: Function assigned to this RC channel
// @Values{Copter}: 0:Do Nothing, 2:Flip, 3:Simple Mode, 4:RTL, 5:Save Trim, 7:Save WP, 9:Camera Trigger, 10:RangeFinder, 11:Fence, 13:Super Simple Mode, 14:Acro Trainer, 15:Sprayer, 16:Auto, 17:AutoTune, 18:Land, 19:Gripper, 21:Parachute Enable, 22:Parachute Release, 23:Parachute 3pos, 24:Auto Mission Reset, 25:AttCon Feed Forward, 26:AttCon Accel Limits, 27:Retract Mount, 28:Relay On/Off, 29:Landing Gear, 30:Lost Copter Sound, 31:Motor Emergency Stop, 32:Motor Interlock, 33:Brake, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 37:Throw, 38:ADSB Avoidance En, 39:PrecLoiter, 40:Proximity Avoidance, 41:ArmDisarm, 42:SmartRTL, 43:InvertedFlight, 46:RC Override Enable, 47:User Function 1, 48:User Function 2, 49:User Function 3, 52:Acro, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 60:ZigZag, 61:ZigZag SaveWP, 62:Compass Learn, 65:GPS Disable, 66:Relay5, 67:Relay6, 68:Stabilize, 69:PosHold, 70:AltHold, 71:FlowHold, 72:Circle, 73:Drift, 76:Standby Mode, 78:RunCam Control, 79:RunCam OSD Control, 80:Viso Align, 81:Disarm, 83:ZigZag Auto, 84:Air Mode, 85:Generator, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8
// @Values{Rover}: 0:Do Nothing, 4:RTL, 5:Save Trim, 7:Save WP, 9:Camera Trigger, 11:Fence, 16:Auto, 19:Gripper, 24:Auto Mission Reset, 28:Relay On/Off, 30:Lost Rover Sound, 31:Motor Emergency Stop, 34:Relay2 On/Off, 35:Relay3 On/Off, 36:Relay4 On/Off, 40:Proximity Avoidance, 41:ArmDisarm, 42:SmartRTL, 46:RC Override Enable, 50:LearnCruise, 51:Manual, 52:Acro, 53:Steering, 54:Hold, 55:Guided, 56:Loiter, 57:Follow, 58:Clear Waypoints, 59:Simple Mode, 62:Compass Learn, 63:Sailboat Tack, 65:GPS Disable, 66:Relay5, 67:Relay6, 74:Sailboat motoring 3pos, 78:RunCam Control, 79:RunCam OSD Control, 80:Viso Align, 81:Disarm, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 207:MainSail, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8
// @Values{Plane}: 0:Do Nothing, 4:ModeRTL, 9:Camera Trigger, 16:ModeAuto, 24:Auto Mission Reset, 28:Relay On/Off, 29:Landing Gear, 34:Relay2 On/Off, 30:Lost Plane Sound, 31:Motor Emergency Stop, 35:Relay3 On/Off, 36:Relay4 On/Off, 38:ADSB Avoidance En, 41:ArmDisarm, 43:InvertedFlight, 46:RC Override Enable, 51:ModeManual, 55:ModeGuided, 56:ModeLoiter, 58:Clear Waypoints, 62:Compass Learn, 64:Reverse Throttle, 65:GPS Disable, 66:Relay5, 67:Relay6, 72:ModeCircle, 77:ModeTakeoff, 78:RunCam Control, 79:RunCam OSD Control, 81:Disarm, 82:QAssist 3pos, 85:Generator, 86: Non Auto Terrain Follow Disable, 87:Crow Select, 88:Soaring Enable, 100:KillIMU1, 101:KillIMU2, 102:Camera Mode Toggle, 105:GPS Disable Yaw, 208:Flap, 209: Forward Throttle, 300:Scripting1, 301:Scripting2, 302:Scripting3, 303:Scripting4, 304:Scripting5, 305:Scripting6, 306:Scripting7, 307:Scripting8
// @User: Standard
AP_GROUPINFO_FRAME("OPTION", 6, RC_Channel, option, 0, AP_PARAM_FRAME_COPTER|AP_PARAM_FRAME_ROVER|AP_PARAM_FRAME_PLANE),
AP_GROUPEND
};
// constructor
RC_Channel::RC_Channel(void)
{
AP_Param::setup_object_defaults(this, var_info);
}
void RC_Channel::set_range(uint16_t high)
{
type_in = RC_CHANNEL_TYPE_RANGE;
high_in = high;
}
void RC_Channel::set_angle(uint16_t angle)
{
type_in = RC_CHANNEL_TYPE_ANGLE;
high_in = angle;
}
void RC_Channel::set_default_dead_zone(int16_t dzone)
{
dead_zone.set_default(abs(dzone));
}
bool RC_Channel::get_reverse(void) const
{
return bool(reversed.get());
}
// read input from hal.rcin or overrides
bool RC_Channel::update(void)
{
if (has_override() && !rc().ignore_overrides()) {
radio_in = override_value;
} else if (rc().has_had_rc_receiver() && !rc().ignore_receiver()) {
radio_in = hal.rcin->read(ch_in);
} else {
return false;
}
if (type_in == RC_CHANNEL_TYPE_RANGE) {
control_in = pwm_to_range();
} else {
//RC_CHANNEL_TYPE_ANGLE
control_in = pwm_to_angle();
}
return true;
}
// recompute control values with no deadzone
// When done this way the control_in value can be used as servo_out
// to give the same output as input
void RC_Channel::recompute_pwm_no_deadzone()
{
if (type_in == RC_CHANNEL_TYPE_RANGE) {
control_in = pwm_to_range_dz(0);
} else {
//RC_CHANNEL_ANGLE
control_in = pwm_to_angle_dz(0);
}
}
/*
return the center stick position expressed as a control_in value
used for thr_mid in copter
*/
int16_t RC_Channel::get_control_mid() const
{
if (type_in == RC_CHANNEL_TYPE_RANGE) {
int16_t r_in = (radio_min.get() + radio_max.get())/2;
if (reversed) {
r_in = radio_max.get() - (r_in - radio_min.get());
}
int16_t radio_trim_low = radio_min + dead_zone;
return (((int32_t)(high_in) * (int32_t)(r_in - radio_trim_low)) / (int32_t)(radio_max - radio_trim_low));
} else {
return 0;
}
}
/*
return an "angle in centidegrees" (normally -4500 to 4500) from
the current radio_in value using the specified dead_zone
*/
int16_t RC_Channel::pwm_to_angle_dz_trim(uint16_t _dead_zone, uint16_t _trim) const
{
int16_t radio_trim_high = _trim + _dead_zone;
int16_t radio_trim_low = _trim - _dead_zone;
int16_t reverse_mul = (reversed?-1:1);
// don't allow out of range values
int16_t r_in = constrain_int16(radio_in, radio_min.get(), radio_max.get());
if (r_in > radio_trim_high && radio_max != radio_trim_high) {
return reverse_mul * ((int32_t)high_in * (int32_t)(r_in - radio_trim_high)) / (int32_t)(radio_max - radio_trim_high);
} else if (r_in < radio_trim_low && radio_trim_low != radio_min) {
return reverse_mul * ((int32_t)high_in * (int32_t)(r_in - radio_trim_low)) / (int32_t)(radio_trim_low - radio_min);
} else {
return 0;
}
}
/*
return an "angle in centidegrees" (normally -4500 to 4500) from
the current radio_in value using the specified dead_zone
*/
int16_t RC_Channel::pwm_to_angle_dz(uint16_t _dead_zone) const
{
return pwm_to_angle_dz_trim(_dead_zone, radio_trim);
}
/*
return an "angle in centidegrees" (normally -4500 to 4500) from
the current radio_in value
*/
int16_t RC_Channel::pwm_to_angle() const
{
return pwm_to_angle_dz(dead_zone);
}
/*
convert a pulse width modulation value to a value in the configured
range, using the specified deadzone
*/
int16_t RC_Channel::pwm_to_range_dz(uint16_t _dead_zone) const
{
int16_t r_in = constrain_int16(radio_in, radio_min.get(), radio_max.get());
if (reversed) {
r_in = radio_max.get() - (r_in - radio_min.get());
}
int16_t radio_trim_low = radio_min + _dead_zone;
if (r_in > radio_trim_low) {
return (((int32_t)(high_in) * (int32_t)(r_in - radio_trim_low)) / (int32_t)(radio_max - radio_trim_low));
}
return 0;
}
/*
convert a pulse width modulation value to a value in the configured
range
*/
int16_t RC_Channel::pwm_to_range() const
{
return pwm_to_range_dz(dead_zone);
}
int16_t RC_Channel::get_control_in_zero_dz(void) const
{
if (type_in == RC_CHANNEL_TYPE_RANGE) {
return pwm_to_range_dz(0);
}
return pwm_to_angle_dz(0);
}
// ------------------------------------------
float RC_Channel::norm_input() const
{
float ret;
int16_t reverse_mul = (reversed?-1:1);
if (radio_in < radio_trim) {
if (radio_min >= radio_trim) {
return 0.0f;
}
ret = reverse_mul * (float)(radio_in - radio_trim) / (float)(radio_trim - radio_min);
} else {
if (radio_max <= radio_trim) {
return 0.0f;
}
ret = reverse_mul * (float)(radio_in - radio_trim) / (float)(radio_max - radio_trim);
}
return constrain_float(ret, -1.0f, 1.0f);
}
float RC_Channel::norm_input_dz() const
{
int16_t dz_min = radio_trim - dead_zone;
int16_t dz_max = radio_trim + dead_zone;
float ret;
int16_t reverse_mul = (reversed?-1:1);
if (radio_in < dz_min && dz_min > radio_min) {
ret = reverse_mul * (float)(radio_in - dz_min) / (float)(dz_min - radio_min);
} else if (radio_in > dz_max && radio_max > dz_max) {
ret = reverse_mul * (float)(radio_in - dz_max) / (float)(radio_max - dz_max);
} else {
ret = 0;
}
return constrain_float(ret, -1.0f, 1.0f);
}
// return a normalised input for a channel, in range -1 to 1,
// ignores trim and deadzone
float RC_Channel::norm_input_ignore_trim() const
{
// sanity check min and max to avoid divide by zero
if (radio_max <= radio_min) {
return 0.0f;
}
const float ret = (reversed ? -2.0f : 2.0f) * (((float)(radio_in - radio_min) / (float)(radio_max - radio_min)) - 0.5f);
return constrain_float(ret, -1.0f, 1.0f);
}
/*
get percentage input from 0 to 100. This ignores the trim value.
*/
uint8_t RC_Channel::percent_input() const
{
if (radio_in <= radio_min) {
return reversed?100:0;
}
if (radio_in >= radio_max) {
return reversed?0:100;
}
uint8_t ret = 100.0f * (radio_in - radio_min) / (float)(radio_max - radio_min);
if (reversed) {
ret = 100 - ret;
}
return ret;
}
/*
return true if input is within deadzone of trim
*/
bool RC_Channel::in_trim_dz() const
{
return is_bounded_int32(radio_in, radio_trim - dead_zone, radio_trim + dead_zone);
}
void RC_Channel::set_override(const uint16_t v, const uint32_t timestamp_ms)
{
if (!rc().gcs_overrides_enabled()) {
return;
}
last_override_time = timestamp_ms != 0 ? timestamp_ms : AP_HAL::millis();
override_value = v;
rc().new_override_received();
}
void RC_Channel::clear_override()
{
last_override_time = 0;
override_value = 0;
}
bool RC_Channel::has_override() const
{
if (override_value <= 0) {
return false;
}
const float override_timeout_ms = rc().override_timeout_ms();
return (override_timeout_ms < 0) || (is_positive(override_timeout_ms) && ((AP_HAL::millis() - last_override_time) < (uint32_t)override_timeout_ms));
}
/*
perform stick mixing on one channel
This type of stick mixing reduces the influence of the auto
controller as it increases the influence of the users stick input,
allowing the user full deflection if needed
*/
int16_t RC_Channel::stick_mixing(const int16_t servo_in)
{
float ch_inf = (float)(radio_in - radio_trim);
ch_inf = fabsf(ch_inf);
ch_inf = MIN(ch_inf, 400.0f);
ch_inf = ((400.0f - ch_inf) / 400.0f);
int16_t servo_out = servo_in;
servo_out *= ch_inf;
servo_out += control_in;
return servo_out;
}
//
// support for auxillary switches:
//
void RC_Channel::reset_mode_switch()
{
switch_state.current_position = -1;
switch_state.debounce_position = -1;
read_mode_switch();
}
void RC_Channel::read_mode_switch()
{
// calculate position of flight mode switch
const uint16_t pulsewidth = get_radio_in();
if (pulsewidth <= 900 || pulsewidth >= 2200) {
return; // This is an error condition
}
modeswitch_pos_t position;
if (pulsewidth < 1231) position = 0;
else if (pulsewidth < 1361) position = 1;
else if (pulsewidth < 1491) position = 2;
else if (pulsewidth < 1621) position = 3;
else if (pulsewidth < 1750) position = 4;
else position = 5;
if (!debounce_completed((int8_t)position)) {
return;
}
// set flight mode and simple mode setting
mode_switch_changed(position);
}
bool RC_Channel::debounce_completed(int8_t position)
{
// switch change not detected
if (switch_state.current_position == position) {
// reset debouncing
switch_state.debounce_position = position;
} else {
// switch change detected
const uint32_t tnow_ms = AP_HAL::millis();
// position not established yet
if (switch_state.debounce_position != position) {
switch_state.debounce_position = position;
switch_state.last_edge_time_ms = tnow_ms;
} else if (tnow_ms - switch_state.last_edge_time_ms >= SWITCH_DEBOUNCE_TIME_MS) {
// position estabilished; debounce completed
switch_state.current_position = position;
return true;
}
}
return false;
}
//
// support for auxillary switches:
//
// init_aux_switch_function - initialize aux functions
void RC_Channel::init_aux_function(const aux_func_t ch_option, const AuxSwitchPos ch_flag)
{
// init channel options
switch(ch_option) {
// the following functions do not need to be initialised:
case AUX_FUNC::ARMDISARM:
case AUX_FUNC::CAMERA_TRIGGER:
case AUX_FUNC::CLEAR_WP:
case AUX_FUNC::COMPASS_LEARN:
case AUX_FUNC::DISARM:
case AUX_FUNC::DO_NOTHING:
case AUX_FUNC::LANDING_GEAR:
case AUX_FUNC::LOST_VEHICLE_SOUND:
case AUX_FUNC::RELAY:
case AUX_FUNC::RELAY2:
case AUX_FUNC::RELAY3:
case AUX_FUNC::RELAY4:
case AUX_FUNC::RELAY5:
case AUX_FUNC::RELAY6:
case AUX_FUNC::VISODOM_CALIBRATE:
case AUX_FUNC::EKF_LANE_SWITCH:
case AUX_FUNC::EKF_YAW_RESET:
case AUX_FUNC::GENERATOR: // don't turn generator on or off initially
case AUX_FUNC::SCRIPTING_1:
case AUX_FUNC::SCRIPTING_2:
case AUX_FUNC::SCRIPTING_3:
case AUX_FUNC::SCRIPTING_4:
case AUX_FUNC::SCRIPTING_5:
case AUX_FUNC::SCRIPTING_6:
case AUX_FUNC::SCRIPTING_7:
case AUX_FUNC::SCRIPTING_8:
break;
case AUX_FUNC::AVOID_ADSB:
case AUX_FUNC::AVOID_PROXIMITY:
case AUX_FUNC::FENCE:
case AUX_FUNC::GPS_DISABLE:
case AUX_FUNC::GPS_DISABLE_YAW:
case AUX_FUNC::GRIPPER:
case AUX_FUNC::KILL_IMU1:
case AUX_FUNC::KILL_IMU2:
case AUX_FUNC::MISSION_RESET:
case AUX_FUNC::MOTOR_ESTOP:
case AUX_FUNC::RC_OVERRIDE_ENABLE:
case AUX_FUNC::RUNCAM_CONTROL:
case AUX_FUNC::RUNCAM_OSD_CONTROL:
case AUX_FUNC::SPRAYER:
do_aux_function(ch_option, ch_flag);
break;
default:
gcs().send_text(MAV_SEVERITY_WARNING, "Failed to init: RC%u_OPTION: %u\n",
(unsigned)(this->ch_in+1), (unsigned)ch_option);
#if CONFIG_HAL_BOARD == HAL_BOARD_SITL
AP_BoardConfig::config_error("Failed to init: RC%u_OPTION: %u",
(unsigned)(this->ch_in+1), (unsigned)ch_option);
#endif
break;
}
}
#if !HAL_MINIMIZE_FEATURES
const RC_Channel::LookupTable RC_Channel::lookuptable[] = {
{ AUX_FUNC::SAVE_WP,"SaveWaypoint"},
{ AUX_FUNC::CAMERA_TRIGGER,"CameraTrigger"},
{ AUX_FUNC::RANGEFINDER,"Rangefinder"},
{ AUX_FUNC::FENCE,"Fence"},
{ AUX_FUNC::SPRAYER,"Sprayer"},
{ AUX_FUNC::PARACHUTE_ENABLE,"ParachuteEnable"},
{ AUX_FUNC::PARACHUTE_RELEASE,"ParachuteRelease"},
{ AUX_FUNC::PARACHUTE_3POS,"Parachute3Position"},
{ AUX_FUNC::MISSION_RESET,"MissionReset"},
{ AUX_FUNC::RETRACT_MOUNT,"RetractMount"},
{ AUX_FUNC::RELAY,"Relay1"},
{ AUX_FUNC::LANDING_GEAR,"Landing"},
{ AUX_FUNC::MOTOR_INTERLOCK,"MotorInterlock"},
{ AUX_FUNC::RELAY2,"Relay2"},
{ AUX_FUNC::RELAY3,"Relay3"},
{ AUX_FUNC::RELAY4,"Relay4"},
{ AUX_FUNC::PRECISION_LOITER,"PrecisionLoiter"},
{ AUX_FUNC::AVOID_PROXIMITY,"AvoidPRoximity"},
{ AUX_FUNC::WINCH_ENABLE,"WinchEnable"},
{ AUX_FUNC::WINCH_CONTROL,"WinchControl"},
{ AUX_FUNC::CLEAR_WP,"ClearWaypoint"},
{ AUX_FUNC::COMPASS_LEARN,"CompassLearn"},
{ AUX_FUNC::SAILBOAT_TACK,"SailboatTack"},
{ AUX_FUNC::GPS_DISABLE,"GPSDisable"},
{ AUX_FUNC::GPS_DISABLE_YAW,"GPSDisableYaw"},
{ AUX_FUNC::RELAY5,"Relay5"},
{ AUX_FUNC::RELAY6,"Relay6"},
{ AUX_FUNC::SAILBOAT_MOTOR_3POS,"SailboatMotor"},
{ AUX_FUNC::SURFACE_TRACKING,"SurfaceTracking"},
{ AUX_FUNC::RUNCAM_CONTROL,"RunCamControl"},
{ AUX_FUNC::RUNCAM_OSD_CONTROL,"RunCamOSDControl"},
{ AUX_FUNC::VISODOM_CALIBRATE,"VisodomCalibrate"},
{ AUX_FUNC::CAM_MODE_TOGGLE,"CamModeToggle"},
{ AUX_FUNC::GENERATOR,"Generator"},
};
/* lookup the announcement for switch change */
const char *RC_Channel::string_for_aux_function(AUX_FUNC function) const
{
for (const struct LookupTable entry : lookuptable) {
if (entry.option == function) {
return entry.announcement;
}
}
return nullptr;
}
#endif // HAL_MINIMIZE_FEATURES
/*
read an aux channel. Return true if a switch has changed
*/
bool RC_Channel::read_aux()
{
const aux_func_t _option = (aux_func_t)option.get();
if (_option == AUX_FUNC::DO_NOTHING) {
// may wish to add special cases for other "AUXSW" things
// here e.g. RCMAP_ROLL etc once they become options
return false;
}
AuxSwitchPos new_position;
if (!read_3pos_switch(new_position)) {
return false;
}
if (!debounce_completed((int8_t)new_position)) {
return false;
}
#if !HAL_MINIMIZE_FEATURES
// announce the change to the GCS:
const char *aux_string = string_for_aux_function(_option);
if (aux_string != nullptr) {
const char *temp = nullptr;
switch (new_position) {
case AuxSwitchPos::HIGH:
temp = "HIGH";
break;
case AuxSwitchPos::MIDDLE:
temp = "MIDDLE";
break;
case AuxSwitchPos::LOW:
temp = "LOW";
break;
}
gcs().send_text(MAV_SEVERITY_INFO, "%s %s", aux_string, temp);
}
#endif
// debounced; undertake the action:
do_aux_function(_option, new_position);
return true;
}
void RC_Channel::do_aux_function_armdisarm(const AuxSwitchPos ch_flag)
{
// arm or disarm the vehicle
switch (ch_flag) {
case AuxSwitchPos::HIGH:
AP::arming().arm(AP_Arming::Method::AUXSWITCH, true);
break;
case AuxSwitchPos::MIDDLE:
// nothing
break;
case AuxSwitchPos::LOW:
AP::arming().disarm(AP_Arming::Method::AUXSWITCH);
break;
}
}
void RC_Channel::do_aux_function_avoid_adsb(const AuxSwitchPos ch_flag)
{
AP_Avoidance *avoidance = AP::ap_avoidance();
if (avoidance == nullptr) {
return;
}
AP_ADSB *adsb = AP::ADSB();
if (adsb == nullptr) {
return;
}
if (ch_flag == AuxSwitchPos::HIGH) {
// try to enable AP_Avoidance
if (!adsb->enabled()) {
gcs().send_text(MAV_SEVERITY_CRITICAL, "ADSB not enabled");
return;
}
avoidance->enable();
AP::logger().Write_Event(LogEvent::AVOIDANCE_ADSB_ENABLE);
gcs().send_text(MAV_SEVERITY_CRITICAL, "ADSB Avoidance Enabled");
return;
}
// disable AP_Avoidance
avoidance->disable();
AP::logger().Write_Event(LogEvent::AVOIDANCE_ADSB_DISABLE);
gcs().send_text(MAV_SEVERITY_CRITICAL, "ADSB Avoidance Disabled");
}
void RC_Channel::do_aux_function_avoid_proximity(const AuxSwitchPos ch_flag)
{
AC_Avoid *avoid = AP::ac_avoid();
if (avoid == nullptr) {
return;
}
switch (ch_flag) {
case AuxSwitchPos::HIGH:
avoid->proximity_avoidance_enable(true);
break;
case AuxSwitchPos::MIDDLE:
// nothing
break;
case AuxSwitchPos::LOW:
avoid->proximity_avoidance_enable(false);
break;
}
}
void RC_Channel::do_aux_function_camera_trigger(const AuxSwitchPos ch_flag)
{
AP_Camera *camera = AP::camera();
if (camera == nullptr) {
return;
}
if (ch_flag == AuxSwitchPos::HIGH) {
camera->take_picture();
}
}
void RC_Channel::do_aux_function_runcam_control(const AuxSwitchPos ch_flag)
{
#if HAL_RUNCAM_ENABLED
AP_RunCam *runcam = AP::runcam();
if (runcam == nullptr) {
return;
}
switch (ch_flag) {
case AuxSwitchPos::HIGH:
runcam->start_recording();
break;
case AuxSwitchPos::MIDDLE:
runcam->osd_option();
break;
case AuxSwitchPos::LOW:
runcam->stop_recording();
break;
}
#endif
}
void RC_Channel::do_aux_function_runcam_osd_control(const AuxSwitchPos ch_flag)
{
#if HAL_RUNCAM_ENABLED
AP_RunCam *runcam = AP::runcam();
if (runcam == nullptr) {
return;
}
switch (ch_flag) {
case AuxSwitchPos::HIGH:
runcam->enter_osd();
break;
case AuxSwitchPos::MIDDLE:
case AuxSwitchPos::LOW:
runcam->exit_osd();
break;
}
#endif
}
// enable or disable the fence
void RC_Channel::do_aux_function_fence(const AuxSwitchPos ch_flag)
{
AC_Fence *fence = AP::fence();
if (fence == nullptr) {
return;
}
fence->enable(ch_flag == AuxSwitchPos::HIGH);
}
void RC_Channel::do_aux_function_clear_wp(const AuxSwitchPos ch_flag)
{
AP_Mission *mission = AP::mission();
if (mission == nullptr) {
return;
}
if (ch_flag == AuxSwitchPos::HIGH) {
mission->clear();
}
}
void RC_Channel::do_aux_function_relay(const uint8_t relay, bool val)
{
AP_ServoRelayEvents *servorelayevents = AP::servorelayevents();
if (servorelayevents == nullptr) {
return;
}
servorelayevents->do_set_relay(relay, val);
}
#if GENERATOR_ENABLED
void RC_Channel::do_aux_function_generator(const AuxSwitchPos ch_flag)
{
AP_Generator_RichenPower *generator = AP::generator();
if (generator == nullptr) {
return;
}
switch (ch_flag) {
case AuxSwitchPos::LOW:
generator->stop();
break;
case AuxSwitchPos::MIDDLE:
generator->idle();
break;
case AuxSwitchPos::HIGH:
generator->run();
break;
}
}
#endif
void RC_Channel::do_aux_function_sprayer(const AuxSwitchPos ch_flag)
{
#if HAL_SPRAYER_ENABLED
AC_Sprayer *sprayer = AP::sprayer();
if (sprayer == nullptr) {
return;
}
sprayer->run(ch_flag == AuxSwitchPos::HIGH);
// if we are disarmed the pilot must want to test the pump
sprayer->test_pump((ch_flag == AuxSwitchPos::HIGH) && !hal.util->get_soft_armed());
#endif // HAL_SPRAYER_ENABLED
}
void RC_Channel::do_aux_function_gripper(const AuxSwitchPos ch_flag)
{
AP_Gripper *gripper = AP::gripper();
if (gripper == nullptr) {
return;
}
switch(ch_flag) {
case AuxSwitchPos::LOW:
gripper->release();
break;
case AuxSwitchPos::MIDDLE:
// nothing
break;
case AuxSwitchPos::HIGH:
gripper->grab();
break;
}
}
void RC_Channel::do_aux_function_lost_vehicle_sound(const AuxSwitchPos ch_flag)
{
switch (ch_flag) {
case AuxSwitchPos::HIGH:
AP_Notify::flags.vehicle_lost = true;
break;
case AuxSwitchPos::MIDDLE:
// nothing
break;
case AuxSwitchPos::LOW:
AP_Notify::flags.vehicle_lost = false;
break;
}
}
void RC_Channel::do_aux_function_rc_override_enable(const AuxSwitchPos ch_flag)
{
switch (ch_flag) {
case AuxSwitchPos::HIGH: {
rc().set_gcs_overrides_enabled(true);
break;
}
case AuxSwitchPos::MIDDLE:
// nothing
break;
case AuxSwitchPos::LOW: {
rc().set_gcs_overrides_enabled(false);
break;
}
}
}
void RC_Channel::do_aux_function_mission_reset(const AuxSwitchPos ch_flag)
{
if (ch_flag != AuxSwitchPos::HIGH) {
return;
}
AP_Mission *mission = AP::mission();
if (mission == nullptr) {
return;
}
mission->reset();
}
void RC_Channel::do_aux_function(const aux_func_t ch_option, const AuxSwitchPos ch_flag)
{
switch(ch_option) {
case AUX_FUNC::CAMERA_TRIGGER:
do_aux_function_camera_trigger(ch_flag);
break;
case AUX_FUNC::FENCE:
do_aux_function_fence(ch_flag);
break;
case AUX_FUNC::GRIPPER:
do_aux_function_gripper(ch_flag);
break;
case AUX_FUNC::RC_OVERRIDE_ENABLE:
// Allow or disallow RC_Override
do_aux_function_rc_override_enable(ch_flag);
break;
case AUX_FUNC::AVOID_PROXIMITY:
do_aux_function_avoid_proximity(ch_flag);
break;
case AUX_FUNC::RELAY:
do_aux_function_relay(0, ch_flag == AuxSwitchPos::HIGH);
break;
case AUX_FUNC::RELAY2:
do_aux_function_relay(1, ch_flag == AuxSwitchPos::HIGH);
break;
case AUX_FUNC::RELAY3:
do_aux_function_relay(2, ch_flag == AuxSwitchPos::HIGH);
break;
case AUX_FUNC::RELAY4:
do_aux_function_relay(3, ch_flag == AuxSwitchPos::HIGH);
break;
case AUX_FUNC::RELAY5:
do_aux_function_relay(4, ch_flag == AuxSwitchPos::HIGH);
break;
case AUX_FUNC::RELAY6:
do_aux_function_relay(5, ch_flag == AuxSwitchPos::HIGH);
break;
case AUX_FUNC::RUNCAM_CONTROL:
do_aux_function_runcam_control(ch_flag);
break;
case AUX_FUNC::RUNCAM_OSD_CONTROL:
do_aux_function_runcam_osd_control(ch_flag);
break;
case AUX_FUNC::CLEAR_WP:
do_aux_function_clear_wp(ch_flag);
break;
case AUX_FUNC::MISSION_RESET:
do_aux_function_mission_reset(ch_flag);
break;
case AUX_FUNC::AVOID_ADSB:
do_aux_function_avoid_adsb(ch_flag);
break;
#if GENERATOR_ENABLED
case AUX_FUNC::GENERATOR:
do_aux_function_generator(ch_flag);
break;
#endif
case AUX_FUNC::SPRAYER:
do_aux_function_sprayer(ch_flag);
break;
case AUX_FUNC::LOST_VEHICLE_SOUND:
do_aux_function_lost_vehicle_sound(ch_flag);
break;
case AUX_FUNC::ARMDISARM:
do_aux_function_armdisarm(ch_flag);
break;
case AUX_FUNC::DISARM:
if (ch_flag == AuxSwitchPos::HIGH) {
AP::arming().disarm(AP_Arming::Method::AUXSWITCH);
}
break;
case AUX_FUNC::COMPASS_LEARN:
if (ch_flag == AuxSwitchPos::HIGH) {
Compass &compass = AP::compass();
compass.set_learn_type(Compass::LEARN_INFLIGHT, false);
}
break;
case AUX_FUNC::LANDING_GEAR: {
AP_LandingGear *lg = AP_LandingGear::get_singleton();
if (lg == nullptr) {
break;
}
switch (ch_flag) {
case AuxSwitchPos::LOW:
lg->set_position(AP_LandingGear::LandingGear_Deploy);
break;
case AuxSwitchPos::MIDDLE:
// nothing
break;
case AuxSwitchPos::HIGH:
lg->set_position(AP_LandingGear::LandingGear_Retract);
break;
}
break;
}
case AUX_FUNC::GPS_DISABLE:
AP::gps().force_disable(ch_flag == AuxSwitchPos::HIGH);
break;
case AUX_FUNC::GPS_DISABLE_YAW:
AP::gps().set_force_disable_yaw(ch_flag == AuxSwitchPos::HIGH);
break;
case AUX_FUNC::MOTOR_ESTOP:
switch (ch_flag) {
case AuxSwitchPos::HIGH: {
SRV_Channels::set_emergency_stop(true);
// log E-stop
AP_Logger *logger = AP_Logger::get_singleton();
if (logger && logger->logging_enabled()) {
logger->Write_Event(LogEvent::MOTORS_EMERGENCY_STOPPED);
}
break;
}
case AuxSwitchPos::MIDDLE:
// nothing
break;
case AuxSwitchPos::LOW: {
SRV_Channels::set_emergency_stop(false);
// log E-stop cleared
AP_Logger *logger = AP_Logger::get_singleton();
if (logger && logger->logging_enabled()) {
logger->Write_Event(LogEvent::MOTORS_EMERGENCY_STOP_CLEARED);
}
break;
}
}
break;
case AUX_FUNC::VISODOM_CALIBRATE:
#if HAL_VISUALODOM_ENABLED
if (ch_flag == AuxSwitchPos::HIGH) {
AP_VisualOdom *visual_odom = AP::visualodom();
if (visual_odom != nullptr) {
visual_odom->align_sensor_to_vehicle();
}
}
#endif
break;
#if !HAL_MINIMIZE_FEATURES
case AUX_FUNC::KILL_IMU1:
if (ch_flag == AuxSwitchPos::HIGH) {
AP::ins().kill_imu(0, true);
} else {
AP::ins().kill_imu(0, false);
}
break;
case AUX_FUNC::KILL_IMU2:
if (ch_flag == AuxSwitchPos::HIGH) {
AP::ins().kill_imu(1, true);
} else {
AP::ins().kill_imu(1, false);
}
break;
#endif // HAL_MINIMIZE_FEATURES
case AUX_FUNC::CAM_MODE_TOGGLE: {
// Momentary switch to for cycling camera modes
AP_Camera *camera = AP_Camera::get_singleton();
if (camera == nullptr) {
break;
}
switch (ch_flag) {
case AuxSwitchPos::LOW:
// nothing
break;
case AuxSwitchPos::MIDDLE:
// nothing
break;
case AuxSwitchPos::HIGH:
camera->cam_mode_toggle();
break;
}
break;
}
case AUX_FUNC::EKF_LANE_SWITCH:
// used to test emergency lane switch
AP::ahrs().check_lane_switch();
break;
case AUX_FUNC::EKF_YAW_RESET:
// used to test emergency yaw reset
AP::ahrs().request_yaw_reset();
break;
case AUX_FUNC::SCRIPTING_1:
case AUX_FUNC::SCRIPTING_2:
case AUX_FUNC::SCRIPTING_3:
case AUX_FUNC::SCRIPTING_4:
case AUX_FUNC::SCRIPTING_5:
case AUX_FUNC::SCRIPTING_6:
case AUX_FUNC::SCRIPTING_7:
case AUX_FUNC::SCRIPTING_8:
break;
default:
gcs().send_text(MAV_SEVERITY_INFO, "Invalid channel option (%u)", (unsigned int)ch_option);
break;
}
}
void RC_Channel::init_aux()
{
AuxSwitchPos position;
if (!read_3pos_switch(position)) {
position = AuxSwitchPos::LOW;
}
init_aux_function((aux_func_t)option.get(), position);
}
// read_3pos_switch
bool RC_Channel::read_3pos_switch(RC_Channel::AuxSwitchPos &ret) const
{
const uint16_t in = get_radio_in();
if (in <= 900 or in >= 2200) {
return false;
}
// switch is reversed if 'reversed' option set on channel and switches reverse is allowed by RC_OPTIONS
bool switch_reversed = reversed && rc().switch_reverse_allowed();
if (in < AUX_PWM_TRIGGER_LOW) {
ret = switch_reversed ? AuxSwitchPos::HIGH : AuxSwitchPos::LOW;
} else if (in > AUX_PWM_TRIGGER_HIGH) {
ret = switch_reversed ? AuxSwitchPos::LOW : AuxSwitchPos::HIGH;
} else {
ret = AuxSwitchPos::MIDDLE;
}
return true;
}
// return switch position value as LOW, MIDDLE, HIGH
// if reading the switch fails then it returns LOW
RC_Channel::AuxSwitchPos RC_Channel::get_aux_switch_pos() const
{
AuxSwitchPos position = AuxSwitchPos::LOW;
UNUSED_RESULT(read_3pos_switch(position));
return position;
}
// return switch position value as LOW, MIDDLE, HIGH
// if reading the switch fails then it returns LOW
RC_Channel::AuxSwitchPos RC_Channels::get_channel_pos(const uint8_t rcmapchan) const
{
const RC_Channel* chan = rc().channel(rcmapchan-1);
return chan != nullptr ? chan->get_aux_switch_pos() : RC_Channel::AuxSwitchPos::LOW;
}
RC_Channel *RC_Channels::find_channel_for_option(const RC_Channel::aux_func_t option)
{
for (uint8_t i=0; i<NUM_RC_CHANNELS; i++) {
RC_Channel *c = channel(i);
if (c == nullptr) {
// odd?
continue;
}
if ((RC_Channel::aux_func_t)c->option.get() == option) {
return c;
}
}
return nullptr;
}
// duplicate_options_exist - returns true if any options are duplicated
bool RC_Channels::duplicate_options_exist()
{
uint8_t auxsw_option_counts[256] = {};
for (uint8_t i=0; i<NUM_RC_CHANNELS; i++) {
const RC_Channel *c = channel(i);
if (c == nullptr) {
// odd?
continue;
}
const uint16_t option = c->option.get();
if (option >= sizeof(auxsw_option_counts)) {
continue;
}
auxsw_option_counts[option]++;
}
for (uint16_t i=0; i<sizeof(auxsw_option_counts); i++) {
if (i == 0) { // MAGIC VALUE! This is AUXSW_DO_NOTHING
continue;
}
if (auxsw_option_counts[i] > 1) {
return true;
}
}
return false;
}
Reference in New Issue View Git Blame Copy Permalink