mirror of https://github.com/ArduPilot/ardupilot
691 lines
25 KiB
C++
691 lines
25 KiB
C++
/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
|
|
|
|
#include "Copter.h"
|
|
|
|
// performs pre-arm checks. expects to be called at 1hz.
|
|
void Copter::update_arming_checks(void)
|
|
{
|
|
// perform pre-arm checks & display failures every 30 seconds
|
|
static uint8_t pre_arm_display_counter = PREARM_DISPLAY_PERIOD/2;
|
|
pre_arm_display_counter++;
|
|
bool display_fail = false;
|
|
if (pre_arm_display_counter >= PREARM_DISPLAY_PERIOD) {
|
|
display_fail = true;
|
|
pre_arm_display_counter = 0;
|
|
}
|
|
|
|
if (pre_arm_checks(display_fail)) {
|
|
set_pre_arm_check(true);
|
|
}
|
|
}
|
|
|
|
// performs pre-arm checks and arming checks
|
|
bool Copter::all_arming_checks_passing(bool arming_from_gcs)
|
|
{
|
|
if (pre_arm_checks(true)) {
|
|
set_pre_arm_check(true);
|
|
}
|
|
|
|
return ap.pre_arm_check && arm_checks(true, arming_from_gcs);
|
|
}
|
|
|
|
// perform pre-arm checks and set ap.pre_arm_check flag
|
|
// return true if the checks pass successfully
|
|
bool Copter::pre_arm_checks(bool display_failure)
|
|
{
|
|
// exit immediately if already armed
|
|
if (motors.armed()) {
|
|
return true;
|
|
}
|
|
|
|
// check if motor interlock and Emergency Stop aux switches are used
|
|
// at the same time. This cannot be allowed.
|
|
if (check_if_auxsw_mode_used(AUXSW_MOTOR_INTERLOCK) && check_if_auxsw_mode_used(AUXSW_MOTOR_ESTOP)){
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Interlock/E-Stop Conflict");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check if motor interlock aux switch is in use
|
|
// if it is, switch needs to be in disabled position to arm
|
|
// otherwise exit immediately. This check to be repeated,
|
|
// as state can change at any time.
|
|
if (ap.using_interlock && motors.get_interlock()){
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Motor Interlock Enabled");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// exit immediately if we've already successfully performed the pre-arm check
|
|
if (ap.pre_arm_check) {
|
|
// run gps checks because results may change and affect LED colour
|
|
// no need to display failures because arm_checks will do that if the pilot tries to arm
|
|
pre_arm_gps_checks(false);
|
|
return true;
|
|
}
|
|
|
|
// succeed if pre arm checks are disabled
|
|
if (g.arming_check == ARMING_CHECK_NONE) {
|
|
set_pre_arm_check(true);
|
|
set_pre_arm_rc_check(true);
|
|
return true;
|
|
}
|
|
|
|
// pre-arm rc checks a prerequisite
|
|
pre_arm_rc_checks();
|
|
if (!ap.pre_arm_rc_check) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: RC not calibrated");
|
|
}
|
|
return false;
|
|
}
|
|
// check Baro
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_BARO)) {
|
|
// barometer health check
|
|
if (!barometer.all_healthy()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Barometer not healthy");
|
|
}
|
|
return false;
|
|
}
|
|
// Check baro & inav alt are within 1m if EKF is operating in an absolute position mode.
|
|
// Do not check if intending to operate in a ground relative height mode as EKF will output a ground relative height
|
|
// that may differ from the baro height due to baro drift.
|
|
nav_filter_status filt_status = inertial_nav.get_filter_status();
|
|
bool using_baro_ref = (!filt_status.flags.pred_horiz_pos_rel && filt_status.flags.pred_horiz_pos_abs);
|
|
if (using_baro_ref) {
|
|
if (fabsf(inertial_nav.get_altitude() - baro_alt) > PREARM_MAX_ALT_DISPARITY_CM) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Altitude disparity");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
|
|
// check Compass
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_COMPASS)) {
|
|
//check if compass has calibrated and requires reboot
|
|
if (compass.compass_cal_requires_reboot()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL, "PreArm: Compass calibrated requires reboot");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check the primary compass is healthy
|
|
if (!compass.healthy()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Compass not healthy");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check compass learning is on or offsets have been set
|
|
if (!compass.configured()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Compass not calibrated");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check for unreasonable compass offsets
|
|
Vector3f offsets = compass.get_offsets();
|
|
if (offsets.length() > COMPASS_OFFSETS_MAX) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Compass offsets too high");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check for unreasonable mag field length
|
|
float mag_field = compass.get_field().length();
|
|
if (mag_field > COMPASS_MAGFIELD_EXPECTED*1.65f || mag_field < COMPASS_MAGFIELD_EXPECTED*0.35f) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Check mag field");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check all compasses point in roughly same direction
|
|
if (!compass.consistent()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: inconsistent compasses");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
}
|
|
|
|
// check GPS
|
|
if (!pre_arm_gps_checks(display_failure)) {
|
|
return false;
|
|
}
|
|
|
|
#if AC_FENCE == ENABLED
|
|
// check fence is initialised
|
|
if (!fence.pre_arm_check()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: check fence");
|
|
}
|
|
return false;
|
|
}
|
|
#endif
|
|
|
|
// check INS
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_INS)) {
|
|
// check accelerometers have been calibrated
|
|
if (!ins.accel_calibrated_ok_all()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Accels not calibrated");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check accels are healthy
|
|
if (!ins.get_accel_health_all()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Accelerometers not healthy");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
//check if accelerometers have calibrated and require reboot
|
|
if (ins.accel_cal_requires_reboot()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL, "PreArm: Accelerometers calibrated requires reboot");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check all accelerometers point in roughly same direction
|
|
if (ins.get_accel_count() > 1) {
|
|
const Vector3f &prime_accel_vec = ins.get_accel();
|
|
for(uint8_t i=0; i<ins.get_accel_count(); i++) {
|
|
// get next accel vector
|
|
const Vector3f &accel_vec = ins.get_accel(i);
|
|
Vector3f vec_diff = accel_vec - prime_accel_vec;
|
|
float threshold = PREARM_MAX_ACCEL_VECTOR_DIFF;
|
|
if (i >= 2) {
|
|
/*
|
|
* for boards with 3 IMUs we only use the first two
|
|
* in the EKF. Allow for larger accel discrepancy
|
|
* for IMU3 as it may be running at a different temperature
|
|
*/
|
|
threshold *= 2;
|
|
}
|
|
if (vec_diff.length() > threshold) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: inconsistent Accelerometers");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
|
|
// check gyros are healthy
|
|
if (!ins.get_gyro_health_all()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Gyros not healthy");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check all gyros are consistent
|
|
if (ins.get_gyro_count() > 1) {
|
|
for(uint8_t i=0; i<ins.get_gyro_count(); i++) {
|
|
// get rotation rate difference between gyro #i and primary gyro
|
|
Vector3f vec_diff = ins.get_gyro(i) - ins.get_gyro();
|
|
if (vec_diff.length() > PREARM_MAX_GYRO_VECTOR_DIFF) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: inconsistent Gyros");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
|
|
// get ekf attitude (if bad, it's usually the gyro biases)
|
|
if (!pre_arm_ekf_attitude_check()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: gyros still settling");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
#if CONFIG_HAL_BOARD != HAL_BOARD_VRBRAIN
|
|
#ifndef CONFIG_ARCH_BOARD_PX4FMU_V1
|
|
// check board voltage
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_VOLTAGE)) {
|
|
if (hal.analogin->board_voltage() < BOARD_VOLTAGE_MIN || hal.analogin->board_voltage() > BOARD_VOLTAGE_MAX) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Check Board Voltage");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
// check battery voltage
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_VOLTAGE)) {
|
|
if (failsafe.battery || (!ap.usb_connected && battery.exhausted(g.fs_batt_voltage, g.fs_batt_mah))) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Check Battery");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
|
|
// check various parameter values
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_PARAMETERS)) {
|
|
|
|
// ensure ch7 and ch8 have different functions
|
|
if (check_duplicate_auxsw()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Duplicate Aux Switch Options");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// failsafe parameter checks
|
|
if (g.failsafe_throttle) {
|
|
// check throttle min is above throttle failsafe trigger and that the trigger is above ppm encoder's loss-of-signal value of 900
|
|
if (channel_throttle->radio_min <= g.failsafe_throttle_value+10 || g.failsafe_throttle_value < 910) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Check FS_THR_VALUE");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
|
|
// lean angle parameter check
|
|
if (aparm.angle_max < 1000 || aparm.angle_max > 8000) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Check ANGLE_MAX");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// acro balance parameter check
|
|
if ((g.acro_balance_roll > g.p_stabilize_roll.kP()) || (g.acro_balance_pitch > g.p_stabilize_pitch.kP())) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: ACRO_BAL_ROLL/PITCH");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
#if CONFIG_SONAR == ENABLED && OPTFLOW == ENABLED
|
|
// check range finder if optflow enabled
|
|
if (optflow.enabled() && !sonar.pre_arm_check()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: check range finder");
|
|
}
|
|
return false;
|
|
}
|
|
#endif
|
|
#if FRAME_CONFIG == HELI_FRAME
|
|
// check helicopter parameters
|
|
if (!motors.parameter_check(display_failure)) {
|
|
return false;
|
|
}
|
|
#endif // HELI_FRAME
|
|
}
|
|
|
|
// check throttle is above failsafe throttle
|
|
// this is near the bottom to allow other failures to be displayed before checking pilot throttle
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_RC)) {
|
|
if (g.failsafe_throttle != FS_THR_DISABLED && channel_throttle->radio_in < g.failsafe_throttle_value) {
|
|
if (display_failure) {
|
|
#if FRAME_CONFIG == HELI_FRAME
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Collective below Failsafe");
|
|
#else
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Throttle below Failsafe");
|
|
#endif
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
// perform pre_arm_rc_checks checks and set ap.pre_arm_rc_check flag
|
|
void Copter::pre_arm_rc_checks()
|
|
{
|
|
// exit immediately if we've already successfully performed the pre-arm rc check
|
|
if (ap.pre_arm_rc_check) {
|
|
return;
|
|
}
|
|
|
|
// set rc-checks to success if RC checks are disabled
|
|
if ((g.arming_check != ARMING_CHECK_ALL) && !(g.arming_check & ARMING_CHECK_RC)) {
|
|
set_pre_arm_rc_check(true);
|
|
return;
|
|
}
|
|
|
|
// check if radio has been calibrated
|
|
if (!channel_throttle->radio_min.configured() && !channel_throttle->radio_max.configured()) {
|
|
return;
|
|
}
|
|
|
|
// check channels 1 & 2 have min <= 1300 and max >= 1700
|
|
if (channel_roll->radio_min > 1300 || channel_roll->radio_max < 1700 || channel_pitch->radio_min > 1300 || channel_pitch->radio_max < 1700) {
|
|
return;
|
|
}
|
|
|
|
// check channels 3 & 4 have min <= 1300 and max >= 1700
|
|
if (channel_throttle->radio_min > 1300 || channel_throttle->radio_max < 1700 || channel_yaw->radio_min > 1300 || channel_yaw->radio_max < 1700) {
|
|
return;
|
|
}
|
|
|
|
// check channels 1 & 2 have trim >= 1300 and <= 1700
|
|
if (channel_roll->radio_trim < 1300 || channel_roll->radio_trim > 1700 || channel_pitch->radio_trim < 1300 || channel_pitch->radio_trim > 1700) {
|
|
return;
|
|
}
|
|
|
|
// check channel 4 has trim >= 1300 and <= 1700
|
|
if (channel_yaw->radio_trim < 1300 || channel_yaw->radio_trim > 1700) {
|
|
return;
|
|
}
|
|
|
|
// if we've gotten this far rc is ok
|
|
set_pre_arm_rc_check(true);
|
|
}
|
|
|
|
// performs pre_arm gps related checks and returns true if passed
|
|
bool Copter::pre_arm_gps_checks(bool display_failure)
|
|
{
|
|
// always check if inertial nav has started and is ready
|
|
if (!ahrs.healthy()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Waiting for Nav Checks");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check if flight mode requires GPS
|
|
bool gps_required = mode_requires_GPS(control_mode);
|
|
|
|
#if AC_FENCE == ENABLED
|
|
// if circular fence is enabled we need GPS
|
|
if ((fence.get_enabled_fences() & AC_FENCE_TYPE_CIRCLE) != 0) {
|
|
gps_required = true;
|
|
}
|
|
#endif
|
|
|
|
// return true if GPS is not required
|
|
if (!gps_required) {
|
|
AP_Notify::flags.pre_arm_gps_check = true;
|
|
return true;
|
|
}
|
|
|
|
// ensure GPS is ok
|
|
if (!position_ok()) {
|
|
if (display_failure) {
|
|
const char *reason = ahrs.prearm_failure_reason();
|
|
if (reason) {
|
|
GCS_MAVLINK::send_statustext_all(MAV_SEVERITY_CRITICAL, "PreArm: %s", reason);
|
|
} else {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: Need 3D Fix");
|
|
}
|
|
}
|
|
AP_Notify::flags.pre_arm_gps_check = false;
|
|
return false;
|
|
}
|
|
|
|
// check EKF compass variance is below failsafe threshold
|
|
float vel_variance, pos_variance, hgt_variance, tas_variance;
|
|
Vector3f mag_variance;
|
|
Vector2f offset;
|
|
ahrs.get_variances(vel_variance, pos_variance, hgt_variance, mag_variance, tas_variance, offset);
|
|
if (mag_variance.length() >= g.fs_ekf_thresh) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: EKF compass variance");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check home and EKF origin are not too far
|
|
if (far_from_EKF_origin(ahrs.get_home())) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: EKF-home variance");
|
|
}
|
|
AP_Notify::flags.pre_arm_gps_check = false;
|
|
return false;
|
|
}
|
|
|
|
// return true immediately if gps check is disabled
|
|
if (!(g.arming_check == ARMING_CHECK_ALL || g.arming_check & ARMING_CHECK_GPS)) {
|
|
AP_Notify::flags.pre_arm_gps_check = true;
|
|
return true;
|
|
}
|
|
|
|
// warn about hdop separately - to prevent user confusion with no gps lock
|
|
if (gps.get_hdop() > g.gps_hdop_good) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"PreArm: High GPS HDOP");
|
|
}
|
|
AP_Notify::flags.pre_arm_gps_check = false;
|
|
return false;
|
|
}
|
|
|
|
// if we got here all must be ok
|
|
AP_Notify::flags.pre_arm_gps_check = true;
|
|
return true;
|
|
}
|
|
|
|
// check ekf attitude is acceptable
|
|
bool Copter::pre_arm_ekf_attitude_check()
|
|
{
|
|
// get ekf filter status
|
|
nav_filter_status filt_status = inertial_nav.get_filter_status();
|
|
|
|
return filt_status.flags.attitude;
|
|
}
|
|
|
|
// arm_checks - perform final checks before arming
|
|
// always called just before arming. Return true if ok to arm
|
|
// has side-effect that logging is started
|
|
bool Copter::arm_checks(bool display_failure, bool arming_from_gcs)
|
|
{
|
|
#if LOGGING_ENABLED == ENABLED
|
|
// start dataflash
|
|
start_logging();
|
|
#endif
|
|
|
|
// check accels and gyro are healthy
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_INS)) {
|
|
//check if accelerometers have calibrated and require reboot
|
|
if (ins.accel_cal_requires_reboot()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL, "PreArm: Accelerometers calibrated requires reboot");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
if (!ins.get_accel_health_all()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Accelerometers not healthy");
|
|
}
|
|
return false;
|
|
}
|
|
if (!ins.get_gyro_health_all()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Gyros not healthy");
|
|
}
|
|
return false;
|
|
}
|
|
// get ekf attitude (if bad, it's usually the gyro biases)
|
|
if (!pre_arm_ekf_attitude_check()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: gyros still settling");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
|
|
// always check if inertial nav has started and is ready
|
|
if (!ahrs.healthy()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Waiting for Nav Checks");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
if (compass.is_calibrating()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Compass calibration running");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
//check if compass has calibrated and requires reboot
|
|
if (compass.compass_cal_requires_reboot()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL, "PreArm: Compass calibrated requires reboot");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// always check if the current mode allows arming
|
|
if (!mode_allows_arming(control_mode, arming_from_gcs)) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Mode not armable");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// always check gps
|
|
if (!pre_arm_gps_checks(display_failure)) {
|
|
return false;
|
|
}
|
|
|
|
// if we are using motor interlock switch and it's enabled, fail to arm
|
|
if (ap.using_interlock && motors.get_interlock()){
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Motor Interlock Enabled");
|
|
return false;
|
|
}
|
|
|
|
// if we are not using Emergency Stop switch option, force Estop false to ensure motors
|
|
// can run normally
|
|
if (!check_if_auxsw_mode_used(AUXSW_MOTOR_ESTOP)){
|
|
set_motor_emergency_stop(false);
|
|
// if we are using motor Estop switch, it must not be in Estop position
|
|
} else if (check_if_auxsw_mode_used(AUXSW_MOTOR_ESTOP) && ap.motor_emergency_stop){
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Motor Emergency Stopped");
|
|
return false;
|
|
}
|
|
|
|
// succeed if arming checks are disabled
|
|
if (g.arming_check == ARMING_CHECK_NONE) {
|
|
return true;
|
|
}
|
|
|
|
// baro checks
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_BARO)) {
|
|
// baro health check
|
|
if (!barometer.all_healthy()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Barometer not healthy");
|
|
}
|
|
return false;
|
|
}
|
|
// Check baro & inav alt are within 1m if EKF is operating in an absolute position mode.
|
|
// Do not check if intending to operate in a ground relative height mode as EKF will output a ground relative height
|
|
// that may differ from the baro height due to baro drift.
|
|
nav_filter_status filt_status = inertial_nav.get_filter_status();
|
|
bool using_baro_ref = (!filt_status.flags.pred_horiz_pos_rel && filt_status.flags.pred_horiz_pos_abs);
|
|
if (using_baro_ref && (fabsf(inertial_nav.get_altitude() - baro_alt) > PREARM_MAX_ALT_DISPARITY_CM)) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Altitude disparity");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
|
|
#if AC_FENCE == ENABLED
|
|
// check vehicle is within fence
|
|
if (!fence.pre_arm_check()) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: check fence");
|
|
}
|
|
return false;
|
|
}
|
|
#endif
|
|
|
|
// check lean angle
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_INS)) {
|
|
if (degrees(acosf(ahrs.cos_roll()*ahrs.cos_pitch()))*100.0f > aparm.angle_max) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Leaning");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
|
|
// check battery voltage
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_VOLTAGE)) {
|
|
if (failsafe.battery || (!ap.usb_connected && battery.exhausted(g.fs_batt_voltage, g.fs_batt_mah))) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Check Battery");
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
|
|
// check throttle
|
|
if ((g.arming_check == ARMING_CHECK_ALL) || (g.arming_check & ARMING_CHECK_RC)) {
|
|
// check throttle is not too low - must be above failsafe throttle
|
|
if (g.failsafe_throttle != FS_THR_DISABLED && channel_throttle->radio_in < g.failsafe_throttle_value) {
|
|
if (display_failure) {
|
|
#if FRAME_CONFIG == HELI_FRAME
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Collective below Failsafe");
|
|
#else
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Throttle below Failsafe");
|
|
#endif
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// check throttle is not too high - skips checks if arming from GCS in Guided
|
|
if (!(arming_from_gcs && control_mode == GUIDED)) {
|
|
// above top of deadband is too always high
|
|
if (channel_throttle->control_in > get_takeoff_trigger_throttle()) {
|
|
if (display_failure) {
|
|
#if FRAME_CONFIG == HELI_FRAME
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Collective too high");
|
|
#else
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Throttle too high");
|
|
#endif
|
|
}
|
|
return false;
|
|
}
|
|
// in manual modes throttle must be at zero
|
|
if ((mode_has_manual_throttle(control_mode) || control_mode == DRIFT) && channel_throttle->control_in > 0) {
|
|
if (display_failure) {
|
|
#if FRAME_CONFIG == HELI_FRAME
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Collective too high");
|
|
#else
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Throttle too high");
|
|
#endif
|
|
}
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
|
|
// check if safety switch has been pushed
|
|
if (hal.util->safety_switch_state() == AP_HAL::Util::SAFETY_DISARMED) {
|
|
if (display_failure) {
|
|
gcs_send_text(MAV_SEVERITY_CRITICAL,"Arm: Safety Switch");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
// if we've gotten this far all is ok
|
|
return true;
|
|
}
|