mirror of https://github.com/ArduPilot/ardupilot
79 lines
3.0 KiB
Lua
79 lines
3.0 KiB
Lua
-- command a Copter to takeoff to 5m and fly a vertical circle in the clockwise direction
|
|
--
|
|
-- CAUTION: This script only works for Copter
|
|
-- this script waits for the vehicle to be armed and RC6 input > 1800 and then:
|
|
-- a) switches to Guided mode
|
|
-- b) takeoff to 5m
|
|
-- c) flies a vertical circle using the velocity controller
|
|
-- d) switches to RTL mode
|
|
|
|
local takeoff_alt_above_home = 5
|
|
local copter_guided_mode_num = 4
|
|
local copter_rtl_mode_num = 6
|
|
local stage = 0
|
|
local circle_angle = 0
|
|
local circle_angle_increment = 1 -- increment the target angle by 1 deg every 0.1 sec (i.e. 10deg/sec)
|
|
local circle_speed = 1 -- velocity is always 1m/s
|
|
local yaw_cos = 0 -- cosine of yaw at takeoff
|
|
local yaw_sin = 0 -- sine of yaw at takeoff
|
|
|
|
-- the main update function that uses the takeoff and velocity controllers to fly a rough square pattern
|
|
function update()
|
|
if not arming:is_armed() then -- reset state when disarmed
|
|
stage = 0
|
|
circle_angle = 0
|
|
else
|
|
pwm6 = rc:get_pwm(6)
|
|
if pwm6 and pwm6 > 1800 then -- check if RC6 input has moved high
|
|
if (stage == 0) then -- change to guided mode
|
|
if (vehicle:set_mode(copter_guided_mode_num)) then -- change to Guided mode
|
|
local yaw_rad = ahrs:get_yaw()
|
|
yaw_cos = math.cos(yaw_rad)
|
|
yaw_sin = math.sin(yaw_rad)
|
|
stage = stage + 1
|
|
end
|
|
elseif (stage == 1) then -- Stage1: takeoff
|
|
if (vehicle:start_takeoff(takeoff_alt_above_home)) then
|
|
stage = stage + 1
|
|
end
|
|
elseif (stage == 2) then -- Stage2: check if vehicle has reached target altitude
|
|
local home = ahrs:get_home()
|
|
local curr_loc = ahrs:get_position()
|
|
if home and curr_loc then
|
|
local vec_from_home = home:get_distance_NED(curr_loc)
|
|
gcs:send_text(0, "alt above home: " .. tostring(math.floor(-vec_from_home:z())))
|
|
if (math.abs(takeoff_alt_above_home + vec_from_home:z()) < 1) then
|
|
stage = stage + 1
|
|
bottom_left_loc = curr_loc -- record location when starting square
|
|
end
|
|
end
|
|
elseif (stage == 3 ) then -- Stage3: fly a vertical circle
|
|
|
|
-- calculate velocity vector
|
|
circle_angle = circle_angle + circle_angle_increment
|
|
if (circle_angle >= 360) then
|
|
stage = stage + 1
|
|
end
|
|
local target_vel = Vector3f()
|
|
local vel_xy = math.cos(math.rad(circle_angle)) * circle_speed
|
|
target_vel:x(yaw_sin * vel_xy)
|
|
target_vel:y(yaw_cos * -vel_xy)
|
|
target_vel:z(-math.sin(math.rad(circle_angle)) * circle_speed)
|
|
|
|
-- send velocity request
|
|
if not (vehicle:set_target_velocity_NED(target_vel)) then
|
|
gcs:send_text(0, "failed to execute velocity command")
|
|
end
|
|
elseif (stage == 4) then -- Stage4: change to RTL mode
|
|
vehicle:set_mode(copter_rtl_mode_num)
|
|
stage = stage + 1
|
|
gcs:send_text(0, "finished square, switching to RTL")
|
|
end
|
|
end
|
|
end
|
|
|
|
return update, 100
|
|
end
|
|
|
|
return update()
|