.. |
2RAWH743
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
3DRControlZeroG
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
ACNS-CM4Pilot
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
ACNS-F405AIO
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
AIRLink
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
AR-F407SmartBat
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
ARKV6X
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
ARK_CANNODE
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
ARK_GPS
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
ARK_RTK_GPS
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
AeroFox-Airspeed
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
AeroFox-Airspeed-DLVR
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
AeroFox-GNSS_F9P
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
AeroFox-PMU
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
Airvolute-DCS2
|
AP_HAL_ChibiOS: add hwdef files for Airvolute DCS2 onboard FMU
|
2023-12-12 11:09:09 +11:00 |
AnyleafH7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
Aocoda-RC-H743Dual
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
AtomRCF405NAVI
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
BETAFPV-F405
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
BeastF7
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
BeastF7v2
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
BeastH7
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
BeastH7v2
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
BirdCANdy
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
BlitzF745
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
BlitzF745AIO
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
BlitzH743Pro
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
BlitzMiniF745
|
AP_HAL_ChibiOS: iFlight BLITZ Mini F745
|
2024-04-17 17:34:10 +10:00 |
BlitzWingH743
|
AP_HAL_ChibiOS: BLITZ Wing H743
|
2024-05-14 09:35:51 +10:00 |
BotBloxSwitch
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
C-RTK2-HP
|
hwdef: fixed pin definition for C-RTK2-HP
|
2024-07-08 22:10:27 +10:00 |
CBU-H7-Stamp
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
CSKY405
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
CUAV-Nora
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
CUAV-Nora-bdshot
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
CUAV-X7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
CUAV-X7-bdshot
|
hwdef: include defaults.parm files from other identical defaults.parm
|
2023-09-05 11:37:19 +10:00 |
CUAV_GPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
CUAVv5
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
CUAVv5-bdshot
|
…
|
|
CUAVv5Nano
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
CUAVv5Nano-bdshot
|
…
|
|
CarbonixF405
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
CarbonixL496
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
CubeBlack
|
AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu
|
2023-08-15 06:53:48 +10:00 |
CubeBlack+
|
…
|
|
CubeBlack-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
CubeGreen-solo
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
CubeOrange
|
hwdef: remove bogus EK2_RPRIMARY from Cube defaults files
|
2024-07-10 22:35:51 +10:00 |
CubeOrange-ODID
|
hwdef: remove bogus EK2_RPRIMARY from Cube defaults files
|
2024-07-10 22:35:51 +10:00 |
CubeOrange-SimOnHardWare
|
hwdef: remove bogus EK2_RPRIMARY from Cube defaults files
|
2024-07-10 22:35:51 +10:00 |
CubeOrange-bdshot
|
Tools/AP_HAL_ChibiOS: move defaults from tools to hwdef directory
|
2024-01-17 18:28:48 +11:00 |
CubeOrange-joey
|
hwdef: remove bogus EK2_RPRIMARY from Cube defaults files
|
2024-07-10 22:35:51 +10:00 |
CubeOrange-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
CubeOrange-periph-heavy
|
AP_HAL_ChibiOS: enable AP_Scheduler for CubeOrange-periph-heavy
|
2024-05-01 17:53:44 +10:00 |
CubeOrangePlus
|
AP_HAL_ChibiOS: add support for PPP on CubeOrangePlus
|
2024-06-27 10:11:14 +10:00 |
CubeOrangePlus-SimOnHardWare
|
hwdef: Cite CubeOrange-SimOnHW as the default file
|
2023-10-14 17:55:56 +11:00 |
CubeOrangePlus-bdshot
|
Tools/AP_HAL_ChibiOS: move defaults from tools to hwdef directory
|
2024-01-17 18:28:48 +11:00 |
CubePilot-CANMod
|
hwdef: remove stray HAL_BUILD_AP_PERIPH defines
|
2024-04-03 18:36:29 +11:00 |
CubePilot-PPPGW
|
hwdef: enable an ADC on CubePilot-PPPGW
|
2024-06-27 10:11:14 +10:00 |
CubePurple
|
AP_HAL_ChibiOS: dshot iofirmware for Durandal, Pixhawk6C, CubePurple and CubeYellow
|
2023-08-15 06:53:48 +10:00 |
CubeRedPrimary
|
hwdef: remove bogus EK2_RPRIMARY from Cube defaults files
|
2024-07-10 22:35:51 +10:00 |
CubeRedPrimary-PPPGW
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
CubeRedSecondary
|
AP_HAL_ChibiOS: CubeRedSecondary IMU orientation fix
|
2024-03-13 18:51:18 +11:00 |
CubeSolo
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
CubeYellow
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
CubeYellow-bdshot
|
…
|
|
DevEBoxH7v2
|
hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults
|
2023-07-19 17:25:18 +09:00 |
DrotekP3Pro
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
Durandal
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
Durandal-bdshot
|
…
|
|
F4BY
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
F35Lightning
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
FlyingMoonF407
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
FlyingMoonF427
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
FlyingMoonH743
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
FlywooF405HD-AIOv2
|
AP_HAL_ChibiOS:correct pin to be pulled high during boot
|
2024-06-01 10:23:52 +10:00 |
FlywooF405Pro
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
FlywooF405S-AIO
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
FlywooF745
|
hwdef: remove save_some_flash.inc
|
2024-03-24 20:15:53 +11:00 |
FlywooF745Nano
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
FoxeerF405v2
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
FoxeerH743v1
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
FreeflyRTK
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
G4-ESC
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
H757I_EVAL
|
hwdef: H757_EVAL: make it not-AP_Periph
|
2024-07-09 12:00:52 +10:00 |
H757I_EVAL_intf
|
AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED
|
2024-04-03 18:36:29 +11:00 |
HEEWING-F405
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
HEEWING-F405v2
|
hwdef: include defaults.parm files from other identical defaults.parm
|
2023-09-05 11:37:19 +10:00 |
Here4AP
|
AP_HAL_ChibiOS: enable LEDs on Here4AP
|
2024-06-10 06:53:23 +10:00 |
Here4FC
|
hwdef: remove HAL_NO_LOGGING from Here4FC-bl.dat
|
2024-01-15 09:40:35 +11:00 |
Hitec-Airspeed
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
HitecMosaic
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
HolybroG4_Compass
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
HolybroG4_GPS
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
HolybroGPS
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
JFB100
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
JFB110
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
JHEMCU-GSF405A
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
JHEMCU-GSF405A-RX2
|
HWDEF:revert copter only build on bds with integrated escs
|
2024-04-03 18:31:54 +11:00 |
JHEMCU-H743HD
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
JHEM_JHEF405
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
KakuteF4
|
hwdef:include minimal in minimize_common
|
2023-10-24 12:20:41 +11:00 |
KakuteF4Mini
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
KakuteF7
|
AP_HAL_ChibiOS:remove fetaures to allow boards to build
|
2024-06-04 09:23:43 +10:00 |
KakuteF7-bdshot
|
…
|
|
KakuteF7Mini
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
KakuteH7
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
KakuteH7-Wing
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
KakuteH7-bdshot
|
…
|
|
KakuteH7Mini
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
KakuteH7Mini-Nand
|
AP_Logger: rename class and hwdef related to w25nxx
|
2024-05-06 12:26:38 +10:00 |
KakuteH7v2
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
LongBowF405WING
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MambaF405-2022
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
MambaF405US-I2C
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MambaF405v2
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MambaH743v4
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF405
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF405-CAN
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF405-STD
|
…
|
|
MatekF405-TE
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF405-TE-bdshot
|
…
|
|
MatekF405-Wing
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF405-Wing-bdshot
|
…
|
|
MatekF405-bdshot
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
MatekF765-SE
|
hwdef:add bdshot to MatekF765-SE
|
2023-07-18 10:26:44 +10:00 |
MatekF765-Wing
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekF765-Wing-bdshot
|
…
|
|
MatekG474
|
AP_HAL_ChibiOS: add MatekG474-Periph hwdef
|
2024-05-10 12:54:11 +10:00 |
MatekG474-DShot
|
AP_HAL_ChibiOS: add MatekG474-Periph hwdef
|
2024-05-10 12:54:11 +10:00 |
MatekG474-Periph
|
AP_HAL_ChibiOS: add MatekG474-Periph hwdef
|
2024-05-10 12:54:11 +10:00 |
MatekH7A3
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekH743
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
MatekH743-bdshot
|
…
|
|
MatekH743-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
MatekL431
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
MatekL431-ADSB
|
hwdef: add MatekL431 ADSB Periph
|
2023-10-09 16:18:13 -07:00 |
MatekL431-APDTelem
|
hwdef: added MatekL431-APDTelem
|
2024-05-08 18:19:19 +10:00 |
MatekL431-Airspeed
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
MatekL431-BattMon
|
hwdef: re-enable RCIN thread on some builds/boards
|
2024-04-03 18:36:29 +11:00 |
MatekL431-DShot
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
MatekL431-EFI
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
MatekL431-GPS
|
hwdef: re-enable RCIN thread on some builds/boards
|
2024-04-03 18:36:29 +11:00 |
MatekL431-HWTelem
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
MatekL431-MagHiRes
|
hwdef: added MatekL431-HiRes build
|
2024-03-16 20:10:35 +11:00 |
MatekL431-Periph
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
MatekL431-Proximity
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
MatekL431-RC
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
MatekL431-Rangefinder
|
AP_HAL_ChibiOS: MatekL431-Rangefinder: Add 2nd rangefinder
|
2024-04-17 17:06:42 +10:00 |
MatekL431-Serial
|
hwdef: added MatekL431-Serial
|
2023-12-27 05:13:14 -07:00 |
MatekL431-bdshot
|
hwdef: re-add ESC control to AP_Periph units which lost it
|
2024-04-02 11:28:27 +11:00 |
MazzyStarDrone
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
MicoAir405Mini
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
MicoAir405v2
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
MicoAir743
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
Nucleo-G491
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
Nucleo-L476
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
Nucleo-L496
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
NucleoH743
|
…
|
|
NucleoH755
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
NxtPX4v2
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
OMNIBUSF7V2
|
AP_HAL_ChibiOS:remove fetaures to allow boards to build
|
2024-06-04 09:23:43 +10:00 |
OmnibusNanoV6
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
OmnibusNanoV6-bdshot
|
hwdef: remove unused STM32_PWM_USE_ADVANCED defines
|
2024-03-23 22:04:34 +11:00 |
OrqaF405Pro
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
PH4-mini
|
…
|
|
PH4-mini-bdshot
|
…
|
|
Pix32v5
|
…
|
|
PixC4-Jetson
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
PixFlamingo
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
PixFlamingo-F767
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
PixPilot-C3
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
PixPilot-V3
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
PixPilot-V6
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
PixSurveyA1
|
…
|
|
PixSurveyA1-IND
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
PixSurveyA2
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
Pixhawk1
|
AP_HAL_ChibiOS: add iomcu dshot for Pixhawk1, Pixhawk5X and fmuv5
|
2023-08-15 06:53:48 +10:00 |
Pixhawk1-1M
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
Pixhawk1-1M-bdshot
|
hwdef: explicitly state no-bootloader-embedding on some boards
|
2023-08-17 08:37:31 +10:00 |
Pixhawk1-bdshot
|
AP_HAL_ChibiOS: remove iomcu dshot from Pixhawk1-1M and add to Pixhawk1-bdshot
|
2024-02-27 12:06:57 +11:00 |
Pixhawk4
|
…
|
|
Pixhawk4-bdshot
|
…
|
|
Pixhawk5X
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
Pixhawk6C
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
Pixhawk6C-bdshot
|
hwdef: include defaults.parm files from other identical defaults.parm
|
2023-09-05 11:37:19 +10:00 |
Pixhawk6X
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
Pixhawk6X-ODID
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
Pixhawk6X-PPPGW
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
Pixhawk6X-bdshot
|
AP_HAL_ChibiOS: Pixhawk6X bdshot version
|
2023-06-27 11:22:12 +10:00 |
Pixracer
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
Pixracer-bdshot
|
…
|
|
Pixracer-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
QioTekAdeptF407
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
QioTekZealotF427
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
QioTekZealotH743
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
QioTekZealotH743-bdshot
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
R9Pilot
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
RADIX2HD
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
RadiolinkPIX6
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
ReaperF745
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
SDMODELH7V1
|
hwdef: update SDH7V1 readme
|
2023-11-28 11:47:32 +11:00 |
SDMODELH7V2
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
SIYI_N7
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
SPRacingH7
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
SPRacingH7RF
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
STM32CubeConf
|
AP_HAL_ChibiOS: Remove executable permissions
|
2023-09-08 17:09:26 +10:00 |
Sierra-F9P
|
hwdef: remove redundant defines from hwdefs
|
2024-04-09 09:32:15 +10:00 |
Sierra-F405
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
Sierra-F412
|
hwdef: remove redundant defines from hwdefs
|
2024-04-09 09:32:15 +10:00 |
Sierra-L431
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
Sierra-PrecisionPoint
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
Sierra-TrueNavIC
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
Sierra-TrueNavPro
|
hwdef: fold minimal_GPS.inc into sole user
|
2024-05-22 18:03:06 +10:00 |
Sierra-TrueNavPro-G4
|
hwdef:update DMA
|
2024-05-08 09:04:45 +10:00 |
Sierra-TrueNorth
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
Sierra-TrueSpeed
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
SkystarsH7HD
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
SkystarsH7HD-bdshot
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
SpeedyBeeF405Mini
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
SpeedyBeeF405WING
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
SuccexF4
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
Swan-K1
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
TBS-Colibri-F7
|
…
|
|
TMotorH743
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
VRBrain-v51
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
VRBrain-v52
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
VRBrain-v54
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
VRCore-v10
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
VRUBrain-v51
|
hwdef: remove HAL_GPIO lines which are simply the default values
|
2024-04-03 11:00:24 +11:00 |
YJUAV_A6
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
YJUAV_A6SE
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
YJUAV_A6SE_H743
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
YJUAV_A6Ultra
|
hwdef: prune out redundant lines
|
2024-07-17 17:49:57 +10:00 |
ZubaxGNSS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
airbotf4
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
common
|
AP_HAL_ChibiOS: add flash ecc corrupt method
|
2024-07-17 17:31:15 +10:00 |
crazyflie2
|
hwdef: Make Crazyflie2 board only autobuild for Copter
|
2024-03-15 21:11:40 +11:00 |
f103-ADSB
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-Airspeed
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-GPS
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-HWESC
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-QiotekPeriph
|
hwdef: make f103-QiotekPeriph a single compass
|
2023-11-08 18:34:41 +11:00 |
f103-RangeFinder
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-Trigger
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f103-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
f303-GPS
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-HWESC
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-M10025
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-M10070
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-MatekGPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
f303-PWM
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-TempSensor
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-Universal
|
hwdef: removed most CAN_APP_NODE_NAME defines
|
2023-09-06 11:21:51 +10:00 |
f303-periph
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
f405-MatekAirspeed
|
AP_HAL_ChibiOS: rename GPS_ to GPS1_
|
2024-03-19 19:50:12 +11:00 |
f405-MatekGPS
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
fmuv2
|
hwdef:include minimal in minimize_common
|
2023-10-24 12:20:41 +11:00 |
fmuv3
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
fmuv3-bdshot
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
fmuv5
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
include
|
hwdef: fold minimal_GPS.inc into sole user
|
2024-05-22 18:03:06 +10:00 |
iomcu
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
iomcu-dshot
|
AP_HAL_ChibiOS: bdshot for f103 iofirmware
|
2023-12-18 19:02:52 +11:00 |
iomcu-f103
|
AP_HAL_ChibiOS: run STM32F103 core clock at 72Mhz on 24Mhz oscillators
|
2023-08-15 06:53:48 +10:00 |
iomcu-f103-8MHz-dshot
|
AP_HAL_ChibiOS: bi-directional dshot on iomcu F103 8MHz
|
2024-05-28 06:56:14 +10:00 |
iomcu-f103-dshot
|
AP_HAL_ChibiOS: reset pwm peripheral on F1 when deallocating IC DMA
|
2024-06-02 10:54:14 +10:00 |
iomcu_f103_8MHz
|
AP_HAL_ChibiOS: run STM32F103 core clock at 72Mhz on 24Mhz oscillators
|
2023-08-15 06:53:48 +10:00 |
kha_eth
|
hwdef: remove redundant defines from hwdefs
|
2024-04-09 09:32:15 +10:00 |
luminousbee4
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
luminousbee5
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRo-M10095
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
mRoCANPWM-M10126
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
mRoCZeroOEMH7-bdshot
|
hwdef: mRoControlZeroOEMH7 bdshot version
|
2023-09-13 17:04:24 +10:00 |
mRoControlZeroClassic
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoControlZeroF7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoControlZeroH7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoControlZeroH7-bdshot
|
AP_HAL_ChibiOS: allow 8 bdshot channels on mRoControlZeroH7
|
2023-08-08 11:50:56 +10:00 |
mRoControlZeroOEMH7
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoKitCANrevC
|
AP_HAL_ChibiOS: mRo KitCAN revC board fix
|
2024-02-01 11:43:35 +11:00 |
mRoNexus
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoPixracerPro
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
mRoPixracerPro-bdshot
|
hwdef: include defaults.parm files from other identical defaults.parm
|
2023-09-05 11:37:19 +10:00 |
mRoX21
|
…
|
|
mRoX21-777
|
AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs
|
2023-12-19 06:53:15 +11:00 |
mindpx-v2
|
hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults
|
2023-07-19 17:25:18 +09:00 |
mini-pix
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
modalai_fc-v1
|
hwdef: stop hwdefs defining HAL_GPIO_LED_ON to 0
|
2024-07-17 17:42:01 +10:00 |
omnibusf4
|
hwdef:fix bug in AtomRCF405NAVI,fix some bds that aren't building
|
2023-10-17 18:21:04 +11:00 |
omnibusf4pro
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
omnibusf4pro-bdshot
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
omnibusf4pro-one
|
hwdef: explicitly state no-bootloader-embedding on some boards
|
2023-08-17 08:37:31 +10:00 |
omnibusf4v6
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
rFCU
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
rGNSS
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
revo-mini
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
revo-mini-bdshot
|
hwdef: explicitly state no-bootloader-embedding on some boards
|
2023-08-17 08:37:31 +10:00 |
revo-mini-i2c
|
AP_HAL_ChibiOS: remove redundant lines from hwdef files
|
2024-04-10 17:28:48 +10:00 |
revo-mini-i2c-bdshot
|
hwdef: remove extraneous lines from hwdef files
|
2024-03-26 11:09:03 +11:00 |
revo-mini-sd
|
HWDEF:revert copter only build on bds with integrated escs
|
2024-04-03 18:31:54 +11:00 |
scripts
|
AP_HAL_ChibiOS: enable heap allocation if flash space for bootloader is > 128K
|
2024-07-17 17:31:15 +10:00 |
skyviper-f412-rev1
|
AP_HAL_ChibiOS: move handling of AP_Radio RC input down into AP_RCProtocol
|
2024-05-01 17:51:49 +10:00 |
skyviper-journey
|
AP_HAL_ChibiOS: update relay parameter names
|
2024-06-18 08:59:34 +09:00 |
skyviper-v2450
|
AP_HAL_ChibiOS: make AP_RANGEFINDER_ENABLED remove more code
|
2024-07-02 09:17:26 +10:00 |
sparky2
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
speedybeef4
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
speedybeef4v3
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
speedybeef4v4
|
AP_HAL_ChibiOS: adjust hwdef files for define renames
|
2024-07-11 09:34:00 +10:00 |
sw-boom-f407
|
AP_HAL_ChibiOS: add sw-boom-f407 and supporting scripts
|
2024-04-05 10:53:38 +11:00 |
sw-nav-f405
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
sw-spar-f407
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
thepeach-k1
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |
thepeach-r1
|
hwdef: don't use DEFAULTGPIO in bootloaders
|
2024-06-25 12:05:40 +10:00 |