mirror of https://github.com/ArduPilot/ardupilot
50 lines
2.5 KiB
C++
50 lines
2.5 KiB
C++
#include "AC_PosControl_Sub.h"
|
|
|
|
AC_PosControl_Sub::AC_PosControl_Sub(AP_AHRS_View& ahrs, const AP_InertialNav& inav,
|
|
const AP_Motors& motors, AC_AttitudeControl& attitude_control, float dt) :
|
|
AC_PosControl(ahrs, inav, motors, attitude_control, dt),
|
|
_alt_max(0.0f),
|
|
_alt_min(0.0f)
|
|
{}
|
|
|
|
/// input_accel_z - calculate a jerk limited path from the current position, velocity and acceleration to an input acceleration.
|
|
/// The function takes the current position, velocity, and acceleration and calculates the required jerk limited adjustment to the acceleration for the next time dt.
|
|
/// The kinematic path is constrained by the maximum acceleration and jerk set using the function set_max_speed_accel_z.
|
|
/// The parameter limit_output specifies if the velocity and acceleration limits are applied to the sum of commanded and correction values or just correction.
|
|
void AC_PosControl_Sub::input_vel_accel_z(float &vel, const float accel, bool force_descend, bool limit_output)
|
|
{
|
|
// check for ekf z position reset
|
|
handle_ekf_z_reset();
|
|
|
|
// limit desired velocity to prevent breeching altitude limits
|
|
if (_alt_min < 0 && _alt_min < _alt_max && _alt_max < 100 && _pos_target.z < _alt_min) {
|
|
vel = constrain_float(vel,
|
|
sqrt_controller(_alt_min-_pos_target.z, 0.0f, _accel_max_z_cmss, 0.0f),
|
|
sqrt_controller(_alt_max-_pos_target.z, 0.0f, _accel_max_z_cmss, 0.0f));
|
|
}
|
|
|
|
// calculated increased maximum acceleration if over speed
|
|
float accel_z_cms = _accel_max_z_cmss;
|
|
if (_vel_desired.z < _vel_max_down_cms && !is_zero(_vel_max_down_cms)) {
|
|
accel_z_cms *= POSCONTROL_OVERSPEED_GAIN_Z * _vel_desired.z / _vel_max_down_cms;
|
|
}
|
|
if (_vel_desired.z > _vel_max_up_cms && !is_zero(_vel_max_up_cms)) {
|
|
accel_z_cms *= POSCONTROL_OVERSPEED_GAIN_Z * _vel_desired.z / _vel_max_up_cms;
|
|
}
|
|
|
|
// adjust desired alt if motors have not hit their limits
|
|
update_pos_vel_accel(_pos_target.z, _vel_desired.z, _accel_desired.z, _dt, _limit_vector.z);
|
|
|
|
// prevent altitude target from breeching altitude limits
|
|
if (is_negative(_alt_min) && _alt_min < _alt_max && _alt_max < 100 && _pos_target.z < _alt_min) {
|
|
_pos_target.z = constrain_float(_pos_target.z, _alt_min, _alt_max);
|
|
}
|
|
|
|
shape_vel_accel(vel, accel,
|
|
_vel_desired.z, _accel_desired.z,
|
|
-accel_z_cms, accel_z_cms,
|
|
_jerk_xy_max, _dt, limit_output);
|
|
|
|
update_vel_accel(vel, accel, _dt, _limit_vector.z);
|
|
}
|