mirror of
https://github.com/ArduPilot/ardupilot
synced 2025-01-02 14:13:42 -04:00
7ac51f60d0
This commit changes the way libraries headers are included in source files: - If the header is in the same directory the source belongs to, so the notation '#include ""' is used with the path relative to the directory containing the source. - If the header is outside the directory containing the source, then we use the notation '#include <>' with the path relative to libraries folder. Some of the advantages of such approach: - Only one search path for libraries headers. - OSs like Windows may have a better lookup time.
77 lines
2.8 KiB
C++
77 lines
2.8 KiB
C++
|
|
#ifndef __AP_HAL_LINUX_GPIO_RPI_H__
|
|
#define __AP_HAL_LINUX_GPIO_RPI_H__
|
|
|
|
#include <stdint.h>
|
|
#include "AP_HAL_Linux.h"
|
|
|
|
#define LOW 0
|
|
#define HIGH 1
|
|
|
|
// Raspberry Pi GPIO memory
|
|
#define BCM2708_PERI_BASE 0x20000000
|
|
#define BCM2709_PERI_BASE 0x3F000000
|
|
#define GPIO_BASE(address) (address + 0x200000)
|
|
#define PAGE_SIZE (4*1024)
|
|
#define BLOCK_SIZE (4*1024)
|
|
|
|
// GPIO setup. Always use INP_GPIO(x) before OUT_GPIO(x) or SET_GPIO_ALT(x,y)
|
|
#define GPIO_MODE_IN(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
|
|
#define GPIO_MODE_OUT(g) *(gpio+((g)/10)) |= (1<<(((g)%10)*3))
|
|
#define GPIO_MODE_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
|
|
#define GPIO_SET_HIGH *(gpio+7) // sets bits which are 1
|
|
#define GPIO_SET_LOW *(gpio+10) // clears bits which are 1
|
|
#define GPIO_GET(g) (*(gpio+13)&(1<<g)) // 0 if LOW, (1<<g) if HIGH
|
|
|
|
// Raspberry Pi GPIO mapping
|
|
#define RPI_GPIO_2 2 // Pin 3 SDA
|
|
#define RPI_GPIO_3 3 // Pin 5 SCL
|
|
#define RPI_GPIO_4 4 // Pin 7 NAVIO_PPM_INPUT
|
|
#define RPI_GPIO_7 7 // Pin 26 CE1 NAVIO_MPU9250_CS
|
|
#define RPI_GPIO_8 8 // Pin 24 CE0 NAVIO_UBLOX_CS
|
|
#define RPI_GPIO_9 9 // Pin 21 MISO
|
|
#define RPI_GPIO_10 10 // Pin 19 MOSI
|
|
#define RPI_GPIO_11 11 // Pin 23 SCLK
|
|
#define RPI_GPIO_14 14 // Pin 8 TxD
|
|
#define RPI_GPIO_15 15 // Pin 10 RxD
|
|
#define RPI_GPIO_17 17 // Pin 11 NAVIO_UART_PORT_5
|
|
#define RPI_GPIO_18 18 // Pin 12 NAVIO_UART_PORT_4
|
|
#define RPI_GPIO_22 22 // Pin 15 NAVIO_UBLOX_PPS
|
|
#define RPI_GPIO_23 23 // Pin 16 NAVIO_MPU9250_DRDY
|
|
#define RPI_GPIO_24 24 // Pin 18 NAVIO_SPI_PORT_6
|
|
#define RPI_GPIO_25 25 // Pin 22 NAVIO_SPI_PORT_5
|
|
#define RPI_GPIO_27 27 // Pin 13 NAVIO_PCA9685_OE
|
|
#define RPI_GPIO_28 28 // Pin 3
|
|
#define RPI_GPIO_29 29 // Pin 4
|
|
#define RPI_GPIO_30 30 // Pin 5
|
|
#define RPI_GPIO_31 31 // Pin 6
|
|
|
|
class Linux::LinuxGPIO_RPI : public AP_HAL::GPIO {
|
|
private:
|
|
int mem_fd;
|
|
void *gpio_map;
|
|
volatile uint32_t *gpio;
|
|
int getRaspberryPiVersion() const;
|
|
|
|
public:
|
|
LinuxGPIO_RPI();
|
|
void init();
|
|
void pinMode(uint8_t pin, uint8_t output);
|
|
int8_t analogPinToDigitalPin(uint8_t pin);
|
|
uint8_t read(uint8_t pin);
|
|
void write(uint8_t pin, uint8_t value);
|
|
void toggle(uint8_t pin);
|
|
|
|
/* Alternative interface: */
|
|
AP_HAL::DigitalSource* channel(uint16_t n);
|
|
|
|
/* Interrupt interface: */
|
|
bool attach_interrupt(uint8_t interrupt_num, AP_HAL::Proc p,
|
|
uint8_t mode);
|
|
|
|
/* return true if USB cable is connected */
|
|
bool usb_connected(void);
|
|
};
|
|
|
|
#endif // __AP_HAL_LINUX_GPIO_RPI_H__
|