mirror of https://github.com/ArduPilot/ardupilot
131 lines
4.4 KiB
Plaintext
131 lines
4.4 KiB
Plaintext
Release 2.47, November 15th 2014
|
|
--------------------------------
|
|
|
|
The ardupilot development team is proud to announce the release of
|
|
version 2.47 of APM:Rover. This is a minor bug fix release. The most
|
|
important change in this release is the fixing of the skid steering
|
|
support but there have been a number of fixes in other areas as well.
|
|
|
|
Full changes list for this release:
|
|
|
|
- add support for controlling safety switch on Pixhawk from ground station
|
|
|
|
- prevent reports of failed AHRS during initialisation
|
|
|
|
- fixed skid steering that was broken in the last release
|
|
|
|
- report gyro unhealthy if gyro calibration failed
|
|
|
|
- fixed dual sonar support in CLI sonar test
|
|
|
|
- fixed Nuttx crash on Pixhawk with bad I2C cables
|
|
|
|
- added GPS_SBAS_MODE parameter - turns on/off satellite based augemtation system for GPS
|
|
|
|
- added GPS_MIN_ELEV parameter - specifiy the elevation mask for GPS satellites
|
|
|
|
- added RELAY_DEFAULT parameter to control default of relay on startup
|
|
|
|
- fixed bug in FRAM storage on Pixhawk that could cause parameters changes not to be saved
|
|
|
|
- better handling of compass errors in the EKF (Extended Kalman Filter)
|
|
|
|
- improved support for linux based autopilots
|
|
|
|
- added support for PulsedLight LIDAR as a range finder
|
|
|
|
Many thanks to everyone who contributed to this release, especially
|
|
Tom Coyle and Linus Penzlien for their excellent testing and feedback.
|
|
|
|
Happy driving!
|
|
|
|
|
|
|
|
Release 2.46, August 26th 2014
|
|
------------------------------
|
|
|
|
The ardupilot development team is proud to announce the release of
|
|
version 2.46 of APM:Rover. This is a major release with a lot of new
|
|
features and bug fixes.
|
|
|
|
This release is based on a lot of development and testing that
|
|
happened prior to the AVC competition where APM based vehicles
|
|
performed very well.
|
|
|
|
Full changes list for this release:
|
|
|
|
- added support for higher baudrates on telemetry ports, to make it
|
|
easier to use high rate telemetry to companion boards. Rates of up
|
|
to 1.5MBit are now supported to companion boards.
|
|
|
|
- new Rangefinder code with support for a wider range of rangefinder
|
|
types including a range of Lidars (thanks to Allyson Kreft)
|
|
|
|
- added logging of power status on Pixhawk
|
|
|
|
- added PIVOT_TURN_ANGLE parameter for pivot based turns on skid
|
|
steering rovers
|
|
|
|
- lots of improvements to the EKF support for Rover, thanks to Paul
|
|
Riseborough and testing from Tom Coyle. Using the EKF can greatly
|
|
improve navigation accuracy for fast rovers. Enable with
|
|
AHRS_EKF_USE=1.
|
|
|
|
- improved support for dual GPS on Pixhawk. Using a 2nd GPS can
|
|
greatly improve performance when in an area with an obstructed
|
|
view of the sky
|
|
|
|
- support for up to 14 RC channels on Pihxawk
|
|
|
|
- added BRAKING_PERCENT and BRAKING_SPEEDERR parameters for better
|
|
breaking support when cornering
|
|
|
|
- added support for FrSky telemetry via SERIAL2_PROTOCOL parameter
|
|
(thanks to Matthias Badaire)
|
|
|
|
- added support for Linux based autopilots, initially with the PXF
|
|
BeagleBoneBlack cape and the Erle robotics board. Support for more
|
|
boards is expected in future releases. Thanks to Victor, Sid and
|
|
Anuj for their great work on the Linux port.
|
|
|
|
- added StorageManager library, which expands available FRAM storage
|
|
on Pixhawk to 16 kByte. This allows for 724 waypoints, 50 rally
|
|
points and 84 fence points on Pixhawk.
|
|
|
|
- improved reporting of magnetometer and barometer errors to the GCS
|
|
|
|
- fixed a bug in automatic flow control detection for serial ports
|
|
in Pixhawk
|
|
|
|
- fixed use of FMU servo pins as digital inputs on Pixhawk
|
|
|
|
- imported latest updates for VRBrain boards (thanks to Emile
|
|
Castelnuovo and Luca Micheletti)
|
|
|
|
- updates to the Piksi GPS support (thanks to Niels Joubert)
|
|
|
|
- improved gyro estimate in DCM (thanks to Jon Challinger)
|
|
|
|
- improved position projection in DCM in wind (thanks to Przemek
|
|
Lekston)
|
|
|
|
- several updates to AP_NavEKF for more robust handling of errors
|
|
(thanks to Paul Riseborough)
|
|
|
|
- lots of small code cleanups thanks to Daniel Frenzel
|
|
|
|
- initial support for NavIO board from Mikhail Avkhimenia
|
|
|
|
- fixed logging of RCOU for up to 12 channels (thanks to Emile
|
|
Castelnuovo)
|
|
|
|
- code cleanups from Silvia Nunezrivero
|
|
|
|
- improved parameter download speed on radio links with no flow
|
|
control
|
|
|
|
Many thanks to everyone who contributed to this release, especially
|
|
Tom Coyle and Linus Penzlien for their excellent testing and feedback.
|
|
|
|
Happy driving!
|