Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-08 08:58:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
61e048a41b
ardupilot/libraries/AP_Notify/OreoLED_I2C.cpp
Andrew Tridgell 891447d798 AP_Notify: fixed LED sync for OreoLED 
the NuttX driver tries to send a sync every 4s, but actually ends up
sending at around 4.1s due to poor scheduling. Rather strangely, the
oreoled firmware seems to rely on this inaccuracy, and doesn't work
with exactly 4s under ChibiOS
2018-11-26 13:29:40 +11:00

693 lines
24 KiB
C++
Raw Blame History

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
OreoLED I2C driver. Based primarily on ArduPilot OreoLED_PX4.cpp,
but with some components from orleod.cpp from px4 firmware
*/
#include <AP_HAL/AP_HAL.h>
#include <AP_HAL/I2CDevice.h>
#include <AP_Common/Semaphore.h>
#include <AP_BoardConfig/AP_BoardConfig.h>
#include "OreoLED_I2C.h"
#include "AP_Notify.h"
#include <utility>
// OreoLEDs start at address 0x68 and add device number. So LED2 is at 0x6A
#define OREOLED_BASE_I2C_ADDR 0x68
#define OREOLED_BACKLEFT 0 // back left led instance number
#define OREOLED_BACKRIGHT 1 // back right led instance number
#define OREOLED_FRONTRIGHT 2 // front right led instance number
#define OREOLED_FRONTLEFT 3 // front left led instance number
#define PERIOD_SLOW 800 // slow flash rate
#define PERIOD_FAST 500 // fast flash rate
#define PERIOD_SUPER 150 // super fast rate
#define PO_ALTERNATE 180 // 180 degree phase offset
#define OREOLED_BOOT_CMD_BOOT_APP 0x60
#define OREOLED_BOOT_CMD_BOOT_NONCE 0xA2
extern const AP_HAL::HAL& hal;
// constructor
OreoLED_I2C::OreoLED_I2C(uint8_t bus, uint8_t theme):
NotifyDevice(),
_bus(bus),
_oreo_theme(theme)
{
}
//
// Initialize the LEDs
//
bool OreoLED_I2C::init()
{
// first look for led on external bus
_dev = std::move(hal.i2c_mgr->get_device(_bus, OREOLED_BASE_I2C_ADDR));
if (!_dev) {
return false;
}
// register timer
_dev->register_periodic_callback(1000, FUNCTOR_BIND_MEMBER(&OreoLED_I2C::update_timer, void));
// return health
return true;
}
// UPDATE device according to timed_updated. Called at 50Hz
void OreoLED_I2C::update()
{
if (slow_counter()) {
return; // slow rate from 50hz to 10hz
}
if (mode_firmware_update()) {
return; // don't go any further if the Pixhawk is in firmware update
}
if (mode_init()) {
return; // don't go any further if the Pixhawk is initializing
}
if (mode_failsafe_radio()) {
return; // don't go any further if the Pixhawk is is in radio failsafe
}
set_standard_colors();
if (mode_failsafe_batt()) {
return; // stop here if the battery is low.
}
if (_pattern_override) {
return; // stop here if in mavlink LED control override.
}
if (mode_auto_flight()) {
return; // stop here if in an autopilot mode.
}
mode_pilot_flight(); // stop here if in an pilot controlled mode.
}
// Slow the update rate from 50hz to 10hz
// Returns true if counting up
// Returns false and resets one counter hits 5
bool OreoLED_I2C::slow_counter()
{
_slow_count++;
if (_slow_count < 5) {
return true;
} else {
_slow_count = 0;
return false;
}
}
// Procedure for when Pixhawk is in FW update / bootloader
// Makes all LEDs go into color cycle mode
// Returns true if firmware update in progress. False if not
bool OreoLED_I2C::mode_firmware_update()
{
if (AP_Notify::flags.firmware_update) {
set_macro(OREOLED_INSTANCE_ALL, OREOLED_PARAM_MACRO_COLOUR_CYCLE);
return true;
} else {
return false;
}
}
// Makes all LEDs rapidly strobe blue while gyros initialize.
bool OreoLED_I2C::mode_init()
{
if (AP_Notify::flags.initialising) {
set_rgb(OREOLED_INSTANCE_ALL, OREOLED_PATTERN_STROBE, 0, 0, 255,0,0,0,PERIOD_SUPER,0);
return true;
} else {
return false;
}
}
// Procedure for when Pixhawk is in radio failsafe
// LEDs perform alternating Red X pattern
bool OreoLED_I2C::mode_failsafe_radio()
{
if (AP_Notify::flags.failsafe_radio) {
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_SLOW,0);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_SLOW,PO_ALTERNATE);
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_SLOW,PO_ALTERNATE);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_SLOW,0);
}
return AP_Notify::flags.failsafe_radio;
}
// Procedure to set standard rear LED colors in aviation theme
// Back LEDS White for normal, yellow for GPS not usable, purple for EKF bad]
// Returns true GPS or EKF problem, returns false if all ok
bool OreoLED_I2C::set_standard_colors()
{
if (!(AP_Notify::flags.gps_fusion)) {
_rear_color_r = 255;
_rear_color_g = 50;
_rear_color_b = 0;
return true;
} else if (AP_Notify::flags.ekf_bad) {
_rear_color_r = 255;
_rear_color_g = 0;
_rear_color_b = 255;
return true;
} else {
_rear_color_r = 255;
_rear_color_g = 255;
_rear_color_b = 255;
return false;
}
}
// Procedure to set low battery LED output
// Colors standard
// Fast strobe alternating front/back
bool OreoLED_I2C::mode_failsafe_batt()
{
if (AP_Notify::flags.failsafe_battery) {
switch (_oreo_theme) {
case OreoLED_Aircraft:
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_FAST,0);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_STROBE, 0, 255, 0,0,0,0,PERIOD_FAST,0);
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_STROBE, _rear_color_r, _rear_color_g, _rear_color_b,0,0,0,PERIOD_FAST,PO_ALTERNATE);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_STROBE, _rear_color_r, _rear_color_g, _rear_color_b,0,0,0,PERIOD_FAST,PO_ALTERNATE);
break;
case OreoLED_Automobile:
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_STROBE, 255, 255, 255,0,0,0,PERIOD_FAST,0);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_STROBE, 255, 255, 255,0,0,0,PERIOD_FAST,0);
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_FAST,PO_ALTERNATE);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_FAST,PO_ALTERNATE);
break;
default:
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_STROBE, 255, 255, 255,0,0,0,PERIOD_FAST,0);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_STROBE, 255, 255, 255,0,0,0,PERIOD_FAST,0);
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_FAST,PO_ALTERNATE);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_FAST,PO_ALTERNATE);
break;
}
}
return AP_Notify::flags.failsafe_battery;
}
// Procedure for when Pixhawk is in an autopilot mode
// Makes all LEDs strobe super fast using standard colors
bool OreoLED_I2C::mode_auto_flight()
{
switch (_oreo_theme) {
case OreoLED_Aircraft:
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_SUPER,0);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_STROBE, 0, 255, 0,0,0,0,PERIOD_SUPER,0);
if ((AP_Notify::flags.pre_arm_check && AP_Notify::flags.pre_arm_gps_check) || AP_Notify::flags.armed) {
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_STROBE, _rear_color_r, _rear_color_g, _rear_color_b,0,0,0,PERIOD_SUPER,PO_ALTERNATE);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_STROBE, _rear_color_r, _rear_color_g, _rear_color_b,0,0,0,PERIOD_SUPER,PO_ALTERNATE);
} else {
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_SOLID, _rear_color_r, _rear_color_g, _rear_color_b);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_SOLID, _rear_color_r, _rear_color_g, _rear_color_b);
}
break;
case OreoLED_Automobile:
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_STROBE, 255, 255, 255,0,0,0,PERIOD_SUPER,0);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_STROBE, 255, 255, 255,0,0,0,PERIOD_SUPER,0);
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_SUPER,PO_ALTERNATE);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_SUPER,PO_ALTERNATE);
break;
default:
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_STROBE, 255, 255, 255,0,0,0,PERIOD_SUPER,0);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_STROBE, 255, 255, 255,0,0,0,PERIOD_SUPER,0);
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_SUPER,PO_ALTERNATE);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_STROBE, 255, 0, 0,0,0,0,PERIOD_SUPER,PO_ALTERNATE);
break;
}
return AP_Notify::flags.autopilot_mode;
}
// Procedure for when Pixhawk is in a pilot controlled mode
// All LEDs use standard pattern and colors
bool OreoLED_I2C::mode_pilot_flight()
{
switch (_oreo_theme) {
case OreoLED_Aircraft:
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_SOLID, 255, 0, 0);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_SOLID, 0, 255, 0);
if ((AP_Notify::flags.pre_arm_check && AP_Notify::flags.pre_arm_gps_check) || AP_Notify::flags.armed) {
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_STROBE, _rear_color_r, _rear_color_g, _rear_color_b,0,0,0,PERIOD_FAST,0);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_STROBE, _rear_color_r, _rear_color_g, _rear_color_b,0,0,0,PERIOD_FAST,PO_ALTERNATE);
} else {
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_SOLID, _rear_color_r, _rear_color_g, _rear_color_b);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_SOLID, _rear_color_r, _rear_color_g, _rear_color_b);
}
break;
case OreoLED_Automobile:
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_SOLID, 255, 255, 255);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_SOLID, 255, 255, 255);
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_SOLID, 255, 0, 0);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_SOLID, 255, 0, 0);
break;
default:
set_rgb(OREOLED_FRONTLEFT, OREOLED_PATTERN_SOLID, 255, 255, 255);
set_rgb(OREOLED_FRONTRIGHT, OREOLED_PATTERN_SOLID, 255, 255, 255);
set_rgb(OREOLED_BACKLEFT, OREOLED_PATTERN_SOLID, 255, 0, 0);
set_rgb(OREOLED_BACKRIGHT, OREOLED_PATTERN_SOLID, 255, 0, 0);
break;
}
return true;
}
// set_rgb - Solid color settings only
void OreoLED_I2C::set_rgb(uint8_t instance, uint8_t red, uint8_t green, uint8_t blue)
{
set_rgb(instance, OREOLED_PATTERN_SOLID, red, green, blue);
}
// set_rgb - Set a color and selected pattern.
void OreoLED_I2C::set_rgb(uint8_t instance, oreoled_pattern pattern, uint8_t red, uint8_t green, uint8_t blue)
{
// get semaphore
WITH_SEMAPHORE(_sem);
// check for all instances
if (instance == OREOLED_INSTANCE_ALL) {
// store desired rgb for all LEDs
for (uint8_t i=0; i<OREOLED_NUM_LEDS; i++) {
_state_desired[i].set_rgb(pattern, red, green, blue);
if (!(_state_desired[i] == _state_sent[i])) {
_send_required = true;
}
}
} else if (instance < OREOLED_NUM_LEDS) {
// store desired rgb for one LED
_state_desired[instance].set_rgb(pattern, red, green, blue);
if (!(_state_desired[instance] == _state_sent[instance])) {
_send_required = true;
}
}
}
// set_rgb - Sets a color, pattern, and uses extended options for amplitude, period, and phase offset
void OreoLED_I2C::set_rgb(uint8_t instance, oreoled_pattern pattern, uint8_t red, uint8_t green, uint8_t blue,
uint8_t amplitude_red, uint8_t amplitude_green, uint8_t amplitude_blue,
uint16_t period, uint16_t phase_offset)
{
WITH_SEMAPHORE(_sem);
// check for all instances
if (instance == OREOLED_INSTANCE_ALL) {
// store desired rgb for all LEDs
for (uint8_t i=0; i<OREOLED_NUM_LEDS; i++) {
_state_desired[i].set_rgb(pattern, red, green, blue, amplitude_red, amplitude_green, amplitude_blue, period, phase_offset);
if (!(_state_desired[i] == _state_sent[i])) {
_send_required = true;
}
}
} else if (instance < OREOLED_NUM_LEDS) {
// store desired rgb for one LED
_state_desired[instance].set_rgb(pattern, red, green, blue, amplitude_red, amplitude_green, amplitude_blue, period, phase_offset);
if (!(_state_desired[instance] == _state_sent[instance])) {
_send_required = true;
}
}
}
// set_macro - set macro for one or all LEDs
void OreoLED_I2C::set_macro(uint8_t instance, oreoled_macro macro)
{
WITH_SEMAPHORE(_sem);
// check for all instances
if (instance == OREOLED_INSTANCE_ALL) {
// store desired macro for all LEDs
for (uint8_t i=0; i<OREOLED_NUM_LEDS; i++) {
_state_desired[i].set_macro(macro);
if (!(_state_desired[i] == _state_sent[i])) {
_send_required = true;
}
}
} else if (instance < OREOLED_NUM_LEDS) {
// store desired macro for one LED
_state_desired[instance].set_macro(macro);
if (!(_state_desired[instance] == _state_sent[instance])) {
_send_required = true;
}
}
}
// Clear the desired state
void OreoLED_I2C::clear_state(void)
{
WITH_SEMAPHORE(_sem);
for (uint8_t i=0; i<OREOLED_NUM_LEDS; i++) {
_state_desired[i].clear_state();
}
_send_required = false;
}
/*
send a command onto the I2C bus
*/
bool OreoLED_I2C::command_send(oreoled_cmd_t &cmd)
{
//printf("sending %u\n", cmd.num_bytes);
_dev->set_address(OREOLED_BASE_I2C_ADDR + cmd.led_num);
/* Calculate XOR CRC and append to the i2c write data */
uint8_t cmd_xor = OREOLED_BASE_I2C_ADDR + cmd.led_num;
for (uint8_t i = 0; i < cmd.num_bytes; i++) {
cmd_xor ^= cmd.buff[i];
}
cmd.buff[cmd.num_bytes++] = cmd_xor;
uint8_t reply[3] {};
bool ret = _dev->transfer(cmd.buff, cmd.num_bytes, reply, sizeof(reply));
//printf("command[%u] %02x %02x %02x %s -> %02x %02x %02x\n", cmd.led_num, ret?"OK":"fail", reply[0], reply[1], reply[2]);
return ret;
}
/*
send boot command to all LEDs
*/
void OreoLED_I2C::boot_leds(void)
{
oreoled_cmd_t cmd;
for (uint8_t i=0; i<OREOLED_NUM_LEDS; i++) {
cmd.led_num = i;
cmd.buff[0] = OREOLED_BOOT_CMD_BOOT_APP;
cmd.buff[1] = OREOLED_BOOT_CMD_BOOT_NONCE;
cmd.buff[2] = OREOLED_BASE_I2C_ADDR + i;
cmd.num_bytes = 3;
command_send(cmd);
}
}
// update_timer - called by scheduler and updates PX4 driver with commands
void OreoLED_I2C::update_timer(void)
{
WITH_SEMAPHORE(_sem);
uint32_t now = AP_HAL::millis();
if (_boot_count < 20 &&
now - _last_boot_ms > 100) {
// send boot command 20 times
_boot_count++;
_last_boot_ms = now;
boot_leds();
}
// send a sync every 4.1s. The PX4 driver uses 4ms, but using
// exactly 4ms does not work. It seems that the oreoled firmware
// relies on the inaccuracy of the NuttX scheduling for this to
// work, and exactly 4ms from ChibiOS causes syncronisation to
// fail
if (now - _last_sync_ms > 4100) {
_last_sync_ms = now;
send_sync();
}
// exit immediately if send not required, or state is being updated
if (!_send_required) {
return;
}
// for each LED
for (uint8_t i=0; i<OREOLED_NUM_LEDS; i++) {
// check for state change
if (true) {
switch (_state_desired[i].mode) {
case OREOLED_MODE_MACRO: {
oreoled_cmd_t cmd {};
cmd.led_num = i;
cmd.buff[0] = OREOLED_PATTERN_PARAMUPDATE;
cmd.buff[1] = OREOLED_PARAM_MACRO;
cmd.buff[2] = _state_desired[i].macro;
cmd.num_bytes = 3;
command_send(cmd);
break;
}
case OREOLED_MODE_RGB: {
oreoled_cmd_t cmd {};
cmd.led_num = i;
cmd.buff[0] = _state_desired[i].pattern;
cmd.buff[1] = OREOLED_PARAM_BIAS_RED;
cmd.buff[2] = _state_desired[i].red;
cmd.buff[3] = OREOLED_PARAM_BIAS_GREEN;
cmd.buff[4] = _state_desired[i].green;
cmd.buff[5] = OREOLED_PARAM_BIAS_BLUE;
cmd.buff[6] = _state_desired[i].blue;
cmd.num_bytes = 7;
command_send(cmd);
break;
}
case OREOLED_MODE_RGB_EXTENDED: {
oreoled_cmd_t cmd {};
cmd.led_num = i;
cmd.buff[0] = _state_desired[i].pattern;
cmd.buff[1] = OREOLED_PARAM_BIAS_RED;
cmd.buff[2] = _state_desired[i].red;
cmd.buff[3] = OREOLED_PARAM_BIAS_GREEN;
cmd.buff[4] = _state_desired[i].green;
cmd.buff[5] = OREOLED_PARAM_BIAS_BLUE;
cmd.buff[6] = _state_desired[i].blue;
cmd.buff[7] = OREOLED_PARAM_AMPLITUDE_RED;
cmd.buff[8] = _state_desired[i].amplitude_red;
cmd.buff[9] = OREOLED_PARAM_AMPLITUDE_GREEN;
cmd.buff[10] = _state_desired[i].amplitude_green;
cmd.buff[11] = OREOLED_PARAM_AMPLITUDE_BLUE;
cmd.buff[12] = _state_desired[i].amplitude_blue;
// Note: The Oreo LED controller expects to receive uint16 values
// in little endian order
cmd.buff[13] = OREOLED_PARAM_PERIOD;
cmd.buff[14] = (_state_desired[i].period & 0xFF00) >> 8;
cmd.buff[15] = (_state_desired[i].period & 0x00FF);
cmd.buff[16] = OREOLED_PARAM_PHASEOFFSET;
cmd.buff[17] = (_state_desired[i].phase_offset & 0xFF00) >> 8;
cmd.buff[18] = (_state_desired[i].phase_offset & 0x00FF);
cmd.num_bytes = 19;
command_send(cmd);
break;
}
default:
break;
};
// save state change
_state_sent[i] = _state_desired[i];
}
}
// flag updates sent
_send_required = false;
}
void OreoLED_I2C::send_sync(void)
{
/* set I2C address to zero */
_dev->set_address(0);
/* prepare command : 0x01 = general hardware call, 0x00 = I2C address of master (but we don't act as a slave so set to zero)*/
uint8_t msg[] = {0x01, 0x00};
/* send I2C command */
_dev->set_retries(0);
_dev->transfer(msg, sizeof(msg), nullptr, 0);
_dev->set_retries(2);
}
// Handle an LED_CONTROL mavlink message
void OreoLED_I2C::handle_led_control(mavlink_message_t *msg)
{
// decode mavlink message
mavlink_led_control_t packet;
mavlink_msg_led_control_decode(msg, &packet);
// exit immediately if instance is invalid
if (packet.instance >= OREOLED_NUM_LEDS && packet.instance != OREOLED_INSTANCE_ALL) {
return;
}
// if pattern is OFF, we clear pattern override so normal lighting should resume
if (packet.pattern == LED_CONTROL_PATTERN_OFF) {
_pattern_override = 0;
clear_state();
return;
}
if (packet.pattern == LED_CONTROL_PATTERN_CUSTOM) {
// Here we handle two different "sub commands",
// depending on the bytes in the first CUSTOM_HEADER_LENGTH
// of the custom pattern byte buffer
// Return if we don't have at least CUSTOM_HEADER_LENGTH bytes
if (packet.custom_len < CUSTOM_HEADER_LENGTH) {
return;
}
// check for the RGB0 sub-command
if (memcmp(packet.custom_bytes, "RGB0", CUSTOM_HEADER_LENGTH) == 0) {
// check to make sure the total length matches the length of the RGB0 command + data values
if (packet.custom_len != CUSTOM_HEADER_LENGTH + 4) {
return;
}
// check for valid pattern id
if (packet.custom_bytes[CUSTOM_HEADER_LENGTH] >= OREOLED_PATTERN_ENUM_COUNT) {
return;
}
// convert the first byte after the command to a oreoled_pattern
oreoled_pattern pattern = (oreoled_pattern)packet.custom_bytes[CUSTOM_HEADER_LENGTH];
// call the set_rgb function, using the rest of the bytes as the RGB values
set_rgb(packet.instance, pattern, packet.custom_bytes[CUSTOM_HEADER_LENGTH + 1], packet.custom_bytes[CUSTOM_HEADER_LENGTH + 2], packet.custom_bytes[CUSTOM_HEADER_LENGTH + 3]);
} else if (memcmp(packet.custom_bytes, "RGB1", CUSTOM_HEADER_LENGTH) == 0) { // check for the RGB1 sub-command
// check to make sure the total length matches the length of the RGB1 command + data values
if (packet.custom_len != CUSTOM_HEADER_LENGTH + 11) {
return;
}
// check for valid pattern id
if (packet.custom_bytes[CUSTOM_HEADER_LENGTH] >= OREOLED_PATTERN_ENUM_COUNT) {
return;
}
// convert the first byte after the command to a oreoled_pattern
oreoled_pattern pattern = (oreoled_pattern)packet.custom_bytes[CUSTOM_HEADER_LENGTH];
// uint16_t values are stored in custom_bytes in little endian order
// assume the flight controller is little endian when decoding values
uint16_t period =
((0x00FF & (uint16_t)packet.custom_bytes[CUSTOM_HEADER_LENGTH + 7]) << 8) |
(0x00FF & (uint16_t)packet.custom_bytes[CUSTOM_HEADER_LENGTH + 8]);
uint16_t phase_offset =
((0x00FF & (uint16_t)packet.custom_bytes[CUSTOM_HEADER_LENGTH + 9]) << 8) |
(0x00FF & (uint16_t)packet.custom_bytes[CUSTOM_HEADER_LENGTH + 10]);
// call the set_rgb function, using the rest of the bytes as the RGB values
set_rgb(packet.instance, pattern, packet.custom_bytes[CUSTOM_HEADER_LENGTH + 1], packet.custom_bytes[CUSTOM_HEADER_LENGTH + 2],
packet.custom_bytes[CUSTOM_HEADER_LENGTH + 3], packet.custom_bytes[CUSTOM_HEADER_LENGTH + 4], packet.custom_bytes[CUSTOM_HEADER_LENGTH + 5],
packet.custom_bytes[CUSTOM_HEADER_LENGTH + 6], period, phase_offset);
} else { // unrecognized command
return;
}
} else {
// other patterns sent as macro
set_macro(packet.instance, (oreoled_macro)packet.pattern);
}
_pattern_override = packet.pattern;
}
OreoLED_I2C::oreo_state::oreo_state()
{
clear_state();
}
void OreoLED_I2C::oreo_state::clear_state()
{
mode = OREOLED_MODE_NONE;
pattern = OREOLED_PATTERN_OFF;
macro = OREOLED_PARAM_MACRO_RESET;
red = 0;
green = 0;
blue = 0;
amplitude_red = 0;
amplitude_green = 0;
amplitude_blue = 0;
period = 0;
repeat = 0;
phase_offset = 0;
}
void OreoLED_I2C::oreo_state::set_macro(oreoled_macro new_macro)
{
clear_state();
mode = OREOLED_MODE_MACRO;
macro = new_macro;
}
void OreoLED_I2C::oreo_state::set_rgb(enum oreoled_pattern new_pattern, uint8_t new_red, uint8_t new_green, uint8_t new_blue)
{
clear_state();
mode = OREOLED_MODE_RGB;
pattern = new_pattern;
red = new_red;
green = new_green;
blue = new_blue;
}
void OreoLED_I2C::oreo_state::set_rgb(enum oreoled_pattern new_pattern, uint8_t new_red, uint8_t new_green,
uint8_t new_blue, uint8_t new_amplitude_red, uint8_t new_amplitude_green, uint8_t new_amplitude_blue,
uint16_t new_period, uint16_t new_phase_offset)
{
clear_state();
mode = OREOLED_MODE_RGB_EXTENDED;
pattern = new_pattern;
red = new_red;
green = new_green;
blue = new_blue;
amplitude_red = new_amplitude_red;
amplitude_green = new_amplitude_green;
amplitude_blue = new_amplitude_blue;
period = new_period;
phase_offset = new_phase_offset;
}
bool OreoLED_I2C::oreo_state::operator==(const OreoLED_I2C::oreo_state &os)
{
return ((os.mode==mode) && (os.pattern==pattern) && (os.macro==macro) && (os.red==red) && (os.green==green) && (os.blue==blue)
&& (os.amplitude_red==amplitude_red) && (os.amplitude_green==amplitude_green) && (os.amplitude_blue==amplitude_blue)
&& (os.period==period) && (os.repeat==repeat) && (os.phase_offset==phase_offset));
}
Reference in New Issue View Git Blame Copy Permalink